As an Amazon Associate I earn from qualifying purchases.
Yosoo #ad - Exclusive satisfaction guarantee: all products sold by our brand, we will give the strict assurance of the quality, if there have any issue we promised an unconditional refund, you can feel comfortable to buy and use. For induction heating current is larger, over time, part of the heat generated by the heated object will be passed on to the heating coil, the terminal part of plastic melt!!!! Therefore, heating coil is relatively large.
If the heating coil in the words of the terminal, induction heating the best heating coil directly welded to the PCB. When heated, the temperature of the heating coil will be high. Operation: heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don't more than two-thirds. Induction heating: power work five minutes to cool.
KOOBOOK #ad - The kit contains a full set of driving circuit elements and brass. Buyers need to bring their own power and cooling unit. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, please add a fan to blow down from above, continuous work, to the resonance capacitors and other components cool.
The higher the voltage, the greater the heating current when the same thing, the effect is better.
This section of induction heating using low-voltage DC power supply 12-48V, maximum power 1000W, maximum current 20A, long-time working power 500-800W. Can only be used for small parts diy players do hardening, annealing and other heat treatment. Also can be used with a graphite crucible melting gold, silver, uniform heating fast, aluminum and other metals, copper, very convenient. Not for industrial production.
Because of its moderate power, copper, uniform heating fast, silver, can be used for small parts DIY players do hardening, aluminum and other metals, Also can be used with a graphite crucible melting gold, annealing and other heat treatment, very convenient.
MOIAK #ad - The induction heating circuit adopt 12-48V low voltage DC power supply, max current is 50A, heating is evenly and fast. Also for melted with graphite crucible/silver/copper/aluminum and so on, the power uo to 2500W. Warm tips- it is recommended that not exceed 48v 35a to prevent accidents and damage, the greater the heating power, Although withstand more than 50A current.
Using six irfp260s and 12 parallel resonance capacitors, the power is high and the efficiency is high. It can work continuously under the condition of good heat dissipation. Induction heating is recommended to use 36V 20A power supply, which is very dangerous. More than 24v/20a power supply, the greater the voltage/current, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, heating faster.
The power line is completely covered with copper cover design, which can increase the current and heat generation; 2. 2500w zvs induction heating module- the heating plate is made of grade pcb, annealing and other heat treatment. Using large and large power supply of the heat sink to dissipate heat better; 3.
H-COME #ad - Object volume:the volume of the object being heated inside the heating coil can not exceed 1/5 of the volume if the heating cylinder, then heating coil diameter less than the diameter of 1/3, or it may be due to overload or burn out the power supply to the circuit. 15a:although this circuit can tolerate 20-30a input current moment, but do not exceed 15a when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
So you must to switching power supply voltage reaches 12V above at first and then access circuit. Voltage：the higher the voltage, the greater the heating current when the same thing, the effect is better.
How to turn on:the use of switching power supply please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, because start insufficient voltage can not afford to vibration, while it is turned on before the induction heating circuit if the voltage rises to 12V, resulting in two simultaneous conduction mos tube so burned components.
Walfront #ad - Using a protective power supply, don't use battery or battery power. Pretty product for students, will exercise their hand-on ability. Easy to use, superior performance. Zvs heating power supply module including heating coil.
PUSOKEI #ad - Below 12v is very dangerous. It is recommended not to exceed 48V 35A to prevent accidents and damage. High performance：the circuit board using double-sided fiberglass board, continuous work, to the resonance capacitors and other components cool. Efficient heat dissipation：this product has a maximum power of 1800w, super pcb layout design and super heat sink, superior heat dissipation effect.
It can work continuously for several hours with good heat dissipation. Please add a 35A fuse or ammeter. Note：although this driver board can withstand more than 40a, first consider whether the power output meets the requirements.
Quality service： it is recommended to use a 36v 20a power supply. We have a 24-hour online professional customer service team. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, the voltage of 12V must be greater than 10A to use the power supply. Easy to use： can be used for small parts diy players do hardening, silver, generator voltage inverter, copper, uniform heating fast, can also do Tesla discharge, aluminum and other metals, annealing and other heat treatment. Also can be used with a graphite crucible melting gold, very convenient.
Gump's grocery #ad - 5. Using factory-designed large inductors, the parameters are consistent and the performance is more stable. 4. 1. 2. The current at the bottom of the board is mostly filled with tin can be used for induction heating.
Ejoyous #ad - 1000w maximum power: maximum power 1000w, maximum current 20A ; The higher the voltage, the higher the heating current but the better the effect.
40mm inner diameter of the heating coil: the inner diameter of the heating coil is 40mm and the height of the spool is 50mm; The reel accepts a 40mm dipstick. Exercise diy hand-on ability: perfect product for DIY players, will exercise their hand-on ability; They can do hardening, annealing and any other heat treatment.
1. Yosoo
#adZVS Driver Module 5V-12V ZVS Low Voltage Induction Heating Board+Heating Coil
#adMore information #ad
Important parameters: input voltage- dc 5v-12v; max power-120W when 12V induction heating. Push the ignition coil primary 5 + 5 turn, about 30 w. Package include: this no tap mini plate ZVS finished board, with no ignition coil and a cooling fan, etc. If the heating coil in the words of the terminal, induction heating the best heating coil directly welded to the PCB. When heated, the temperature of the heating coil will be high. Operation: heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don't more than two-thirds. Induction heating: power work five minutes to cool.
| Brand | Yosoo #ad |
| Manufacturer | Yosoo #ad |
| Height | 0.79 Inches |
| Length | 0.79 Inches |
| Width | 0.79 Inches |
| Part Number | Yosoo |
More information #ad
2. KOOBOOK
#adKOOBOOK 1Pcs 1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater 12V-48V DIY
#adThe higher the voltage, the greater the heating current when the same thing, the effect is better.
More information #ad
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough. This section of induction heating using low-voltage DC power supply 12-48V, maximum power 1000W, maximum current 20A, long-time working power 500-800W. Can only be used for small parts diy players do hardening, annealing and other heat treatment. Also can be used with a graphite crucible melting gold, silver, uniform heating fast, aluminum and other metals, copper, very convenient. Not for industrial production.
| Brand | KOOBOOK #ad |
| Manufacturer | KOOBOOK #ad |
| Part Number | KB505 |
| Warranty | NO |
More information #ad
3. Yosoo
#adYosoo 1000W ZVS Low Voltage Induction Heating Board Module Tesla coil 12V-48V Flyback Driver Heater DIY
#adYosoo #ad - 24v input with no load current of 3A, 48V input with no load current of 6A. Tested 53v power supply when working properly. This section of induction heating using low-voltage DC power supply 12-48V Maximum current 20A, maximum power 1000W.Because of its moderate power, copper, uniform heating fast, silver, can be used for small parts DIY players do hardening, aluminum and other metals, Also can be used with a graphite crucible melting gold, annealing and other heat treatment, very convenient.
More information #ad
The higher the voltage, but at the same time heat is also large, the effect is better, the greater the heating current when the same thing, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.| Brand | Yosoo #ad |
| Manufacturer | Yosoo #ad |
| Height | 9.8 Inches |
| Length | 6.8 Inches |
| Weight | 0.02 Pounds |
| Width | 2.6 Inches |
| Part Number | Yosoo165461 |
| Model | Yosoo165461 |
More information #ad
4. MOIAK
#ad12V-48V DIY High Frequency Induction Heating Machine Module Flyback Driver with Copper Ring and Cooling Fan, 2500W ZVS Induction Heater Heating PCB Board Module
#adUsing six irfp260s and 12 parallel resonance capacitors, the power is high and the efficiency is high. It can work continuously under the condition of good heat dissipation. Induction heating is recommended to use 36V 20A power supply, which is very dangerous. More than 24v/20a power supply, the greater the voltage/current, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, heating faster.
More information #ad
The induction heating boards maximum power is 2500W, can also do discharge, since with a cooling fan interface, heat dissipation good, adopted super PCB layout design and super heat sink, generator voltage inverter etc. Package includes- 1 x induction heater, zvs induction heating power supply module, 2500w induction heating module zvs low voltage 12v-48v induction heating board flyback driver heater diy high frequency induction heating machine Module, 12-48V 2500W ZVS Induction Heater Heating PCB Board Module Flyback Driver, 1 x copper ring; ZVS Driver Module, 2500W ZVS Induction Heating Board Module, Low Voltage High Frequency 12-48V Flyback Driver Heater with TeslaCoil and Cooling Fan. The power line is completely covered with copper cover design, which can increase the current and heat generation; 2. 2500w zvs induction heating module- the heating plate is made of grade pcb, annealing and other heat treatment. Using large and large power supply of the heat sink to dissipate heat better; 3.
| Brand | MOIAK #ad |
| Manufacturer | MOIAK #ad |
| Height | 3.15 Inches |
| Length | 12.6 Inches |
| Weight | 0.02 Pounds |
| Width | 3.94 Inches |
| Part Number | 15780528199277 |
More information #ad
5. H-COME
#ad1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater DIY
#adSo you must to switching power supply voltage reaches 12V above at first and then access circuit. Voltage：the higher the voltage, the greater the heating current when the same thing, the effect is better.
More information #ad
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough. How to cooling:the circuit board using double-sided fiberglass board, continuous work, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, please add a fan to blow down from above, to the resonance capacitors and other components cool. How to turn on:the use of switching power supply please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, because start insufficient voltage can not afford to vibration, while it is turned on before the induction heating circuit if the voltage rises to 12V, resulting in two simultaneous conduction mos tube so burned components.
| Brand | H-COME #ad |
| Manufacturer | H-come Tech #ad |
More information #ad
6. Walfront
#adZVS Low Voltage Induction Heating Board Module Flyback Driver Heater
#adMore information #ad
The power supply used for heating must be large enough. Ensure all the components welding right, power line connect in right way, than to set up an electric circuit. High quality material, nontoxic, corrosion and wear resistant.| Brand | Walfront #ad |
| Manufacturer | Walfront #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.24 Pounds |
| Width | 0 Inches |
| Part Number | Wal frontgc4i59p7vx |
More information #ad
7. PUSOKEI
#ad1800W ZVS Induction Heating Board Module,12V-48V Induction Heating Board Flyback Driver Heater,DIY High Frequency Induction Heating Machine,ZVS Heating Board for Enerator Voltage Inverter
#adIt can work continuously for several hours with good heat dissipation. Please add a 35A fuse or ammeter. Note：although this driver board can withstand more than 40a, first consider whether the power output meets the requirements.
More information #ad
Do not heat metal that is too large or it may be overloaded. When using a switching power supply, please add a fan to blow down from above, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, make sure that the power supply voltage is stable before connecting to the induction heating circuit. Quality service： it is recommended to use a 36v 20a power supply. We have a 24-hour online professional customer service team. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, the voltage of 12V must be greater than 10A to use the power supply. Easy to use： can be used for small parts diy players do hardening, silver, generator voltage inverter, copper, uniform heating fast, can also do Tesla discharge, aluminum and other metals, annealing and other heat treatment. Also can be used with a graphite crucible melting gold, very convenient.
| Brand | PUSOKEI #ad |
| Manufacturer | PUSOKEI #ad |
| Height | 3.54 Inches |
| Length | 7.28 Inches |
| Weight | 2.47 Pounds |
| Width | 3.62 Inches |
| Part Number | Tangxiqsxar3ohu5 |
| Model | Tangxiqsxar3ohu5 |
More information #ad
8. Gump's grocery
#adGump's grocery, Gump s grocery 1000W Voltage Induction Board 20A ZVS Heating Board Module Heater Driver
#adMore information #ad
Made of military grade 1. 6mm double-sided fiberglass board. All resistors use five-ring tight resistors five-ring resistors have small error and work more stable. The current needs to be more than 10A. 3. Generally, it is powered by 12-30V DC power supply.| Brand | Gump's grocery #ad |
| Manufacturer | Gump's grocery #ad |
More information #ad
9. Ejoyous
#adInduction Heating Board Module ZVS Low Voltage Power Supply High Frequency Board Machine Module Flyback Driver Heater Brass Coil 1000W 12V-48V 20A for DIY
#ad40mm inner diameter of the heating coil: the inner diameter of the heating coil is 40mm and the height of the spool is 50mm; The reel accepts a 40mm dipstick. Exercise diy hand-on ability: perfect product for DIY players, will exercise their hand-on ability; They can do hardening, annealing and any other heat treatment.
More information #ad
With heating coil: ZVS heating power supply module including heating coil. High quality fr4 material: this heat board is made of high quality FR4 material, nontoxic, corrosion and wear resistant.| Brand | Ejoyous #ad |
| Manufacturer | Ejoyous #ad |
| Height | 2.55 Inches |
| Length | 9.84 Inches |
| Weight | 584 Grams |
| Width | 6.69 Inches |
| Part Number | induction120201 |
More information #ad
