Top 10 ZEROPLAY Miter Bars by MICROJIG Double Pack – Power Tool Accessory Jigs

As an Amazon Associate I earn from qualifying purchases.

1. MICRO JIG

#ad

ZEROPLAY Miter Bars by MICROJIG Double Pack

#ad
MICRO JIG #ad - Build table Saw Sleds Fast. Zeroplay miter bars will fit any standard 3/4” x 3/8” t-track miter slot That Measures Between 073" and 079" wide and at least 5/16" Deep. No slop, side-to-side Play Or Seasonal Warping. Top-down installation for easy And Fast Mounting To Jigs, Fixtures And Sleds.
BrandMICRO JIG #ad
ManufacturerMICROJIG, Inc. #ad
Height1 Inches
Length10 Inches
Weight0.64 Pounds
Width1 Inches
Part NumberZP9-B2S2
ModelZP9-B2S2
WarrantyExtended 3-Year Warranty from Authorized Resellers

2. MICRO JIG

#ad

GRR-RIPPER Advanced 3D Pushblock for Table Saw, and Band Saw by MICROJIG, Jointer, Router Table

#ad
MICRO JIG #ad - Moving-blade-guard hand protection. Cutting range table Saws:1/4 to 5 inch. A true microJIG Innovation. :. Precise 1/4" thin rips. Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more. Made in the usa. Gr-200 features include: 3-directional Force for total control of the workpiece and virtually eliminate kickback.
BrandMICRO JIG #ad
ManufacturerMICROJIG, Inc. #ad
Height4.65 Inches
Length8 Inches
Weight2.4 Pounds
Width5.5 Inches
Part NumberGR-200
ModelGR-200
WarrantyExtended 3-Year Warranty from Authorized Resellers

3. INCRA

#ad

INCRA Miter Combo Value Pack

#ad
INCRA #ad - Removable t-slot retaining clips & adjustable miter bar. Table size: for adequate support, the miter express requires a minimum of 11" from the side of the blade to either the left or right edges of the saw sled can be installed on either side of the blade. Special edition 1/10th° Vernier Cursor. Dock & lock the included INCRA Miter Gauge in Seconds. Special edition telescoping INCRA-LOCK Fence. Glidelock miter bar - the miter 1000se's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels.
BrandINCRA #ad
ManufacturerIncra #ad
Height14.5 Inches
Length21.44 Inches
Weight6.25 Pounds
Width26.75 Inches
Part NumberME/1000SE
ModelME/1000SE
WarrantyN

4. MICROJIG

#ad

GRR-RIPPER Complete Double Pack Limited Addition by MICROJIG

#ad
MICROJIG #ad - The grr-ripper handle bridge accessory mounts on the handle between it and the pushblock to provide 4 points of surface contact for evenly distributed downward pressure, and operational range of motion to enable you to position the handle at an angle that is comfortable for you. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board.

A great accessory for your table saw, and routing needs! Fits any existing GRR-RIPPER. Includes 5 heels, band saw, 2 heel spacers and mounting hardware. Easily attaches to your GRR-Ripper with the Handle Bridge Kit available separately. Gravity heel Accessory features auto-retracting technology for reducing blowout. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board. Fits any existing GRR-RIPPER. Provides a secure backing to routing operations and can be used as a template for repeat routing. It provides a secure backing to routing operations and can be used as a template for repeat routing.

Each grr-ripper advanced 3d complete kit includes a grr-ripper Advanced 3D Pushblock, 1/8" Leg Accessory, a Gravity Heel Kit, a Handle Bridge Kit, and a Deflector/Connector Kit. Grr-ripper advanced 3d pushblock features micro jig's proprietary non-slip green grr-rip textured gripping surface for greater control; 3 legs for multi-directional stability and control; built-in balance support; a stabilizing plate to lock your material against the fence to keep your work square and flush; an adjustable spacer that gives you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts; and an adjustable handle for maximum comfort.
BrandMICROJIG #ad
ManufacturerMICROJIG #ad
Height0 Inches
Length0 Inches
Weight1 Pounds
Width0 Inches
Part NumberGR-562
ModelGR-562
WarrantyExtended 3-Year Manufacturer's Warranty

5. Peachtree Woodworking Supply

#ad

Router Table and Bandsaws 2 UHMW Bars, Fixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws, UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs

#ad
Peachtree Woodworking Supply #ad - We all know how residue left on a table saw can be rather irritating and even harder to remove. Length of bar may vary slightly. Made in the usa! Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.

Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove. Use this uhmw to make jigs and fixtures for your table saw, etc. Its also very slick in comparison to wood and other plastics. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, router table, band saw or router table. Even though its "slick", it does not leave behind any residue which means no clean up after use.

The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000 to 6, 000, 000, 000. This makes it ideal for sleds where repetitive sliding happens regularly.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Part Number1120
Model11520

6. INCRA

#ad

INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop

#ad
INCRA #ad - 41 laser cut v-stops for extreme accuracy at all popular angles. Incra flip shop stop-Fence Positioner for optimal mitering accuracy. 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths. Engraved stainless steel primary scale for precision accuracy. Patented glidelock miter bar with 6 expansion points for quick repeats.
BrandINCRA #ad
ManufacturerIncra #ad
Height4.5 Inches
Length18.25 Inches
Weight8.26 Pounds
Width18.25 Inches
Part NumberMITER1000/SE
ModelMITER1000SE
Warranty1 year replacement warranty

7. FLAMEER

#ad

2pcs Miter Track Stop T-Slot T-Tracks Stop Chute Locator Aluminium Alloy Backing Connector Woodworking Guide Rail T-Slot for 45 Type Woodworking DIY Table Saw

#ad
FLAMEER #ad - Aluminum alloy materialthe 45 type chute stopper is made of high-quality aluminum alloy material, easy to wash, which is not easy to wear, has good anti-skid performance, and can be used for a long time.

Diy woodworking tool You can use it to build your own miter fence with stop. Widely usedperfect for woodworking, t-track in woodworking. Easy to use & carrythe size of this chute stop is 10x8x3cm, which is very convenient and easy to carry. Can be used to position and fix wood, suitable for 45 type woodworking table fence track; standard T-track with T-slot, as well as the processing of t-slots and t-tracks. Ergonomic designergonomic design makes it easier to operate; Can help limit the length of the chute, and the stopper can be locked. When using, push it to the position you need, you just need to place it in the chute, and then adjust it to the fixed limiter.
BrandFLAMEER #ad
ManufacturerFLAMEER #ad
Part Number829e7e3ddda46c145d3074d5791980e4

8. KREG

#ad

KREG KMS7102 Table Saw Precision Miter Gauge System, Blue

#ad
KREG #ad - Microadjuster allows additional angle adjustment to 1/100th degree. Vernier scale allows fast, 1/10th-degree angle adjustments. Gauge head is cnc machine perfectly square to the bar and table no stampings. Our extremely straight 24 inch 610mm anodized-aluminum bar is 3/8 inch9. 5mm thick by 3/4 inch19mm wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver. Factory calibration. Positive stops at 0, 22-1/2, 10, 30 and 45-degrees; limited lifetime warranty. Guaranteed out of the box to. 003 accuracy of 6-inches.
BrandKREG #ad
ManufacturerKreg #ad
Height6.25 Inches
Length25.25 Inches
Weight6 Pounds
Width2.63 Inches
Part NumberKMS7102
ModelKMS7102
WarrantyLIMITED

9. jxgzyy

#ad

Jxgzyy 48" Aluminum Miter Track Double-Cut Profile Universal T-Track Bars with Predrilled Mounting Holes for jigs milling tables clamps woodworking(4 pack)

#ad
jxgzyy #ad - Dimensions: individual t-track 48" length x 3/4" width x 3/8" depth - size allows for easy and solid embedding without sacrificing surface platform integrity. Easy inatallation:t-tracks are equipped with a double-cut profile for hardware versatility and pre-drilled mounting holes for easy installation.

Premium quality:constructed out of extruded anodized aluminum, delivering a lightweight design that possesses an impressive strength to weight ratio, along with corrosion resistance and superior resilience. Package contains: each t track aluminum set contains 4 pcs track with protective sleeve. Screws not included. Versatile design:universal t-tracks designed to accommodate 5/16" and 1/4" t-bolts, and 1/4" hex bolts. Can either be embedded in a workstation board itself, or simply attached onto the tabletop.
Brandjxgzyy #ad
Manufacturerjxgzyy #ad
Part Number0726

10. Rockwell

#ad

Rockwell RK9034 JawStand XP Work Support Stand

#ad
Rockwell #ad - Low friction surface when you’re ready to release the project just unclamp it and it will slide out smoothly. Bubble level built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right.

Swiveling & tilting head clamps goes from 0-90° so you can place the project in the exact orientation you like it while working on it. Tripod base with no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load. Rubber grip surfaces holds the project securely in place without marking up or damaging the material. Micro height adjustment knob allows you to place the project precisely where it needs to be so you can fasten it to the wall.
BrandRockwell #ad
ManufacturerPositec USA #ad
Height33.1 Inches
Length14 Inches
Weight0.96 Pounds
Width8 Inches
Part NumberRK9034
ModelRK9034