Top 9 Optical Punch Set – Center Punches

As an Amazon Associate I earn from qualifying purchases.

1. Yellowhammer


Yellowhammer Precision Tools Optical Center Punch Set includes Bulls Eye Lens, Cross Hair Lens, 150 Degree Center Punch, 60 Degree Center Punch and Plastic Storage Case

Yellowhammer #ad - Organized: come's in an attractive case for storage. Money-back guarantee: Your satisfaction is guaranteed or your money back! Economical: a budget-friendly alternative as compared to the market. Efficient: just look down the magnifying lens and align the cross hairs with the mark on your work piece, replace with the supplied punch and give it a tap. Precise: includes a bull's eye and cross hair lens, a 150 degree and 60 degree center punch.
BrandYellowhammer #ad
ManufacturerYellowhammer #ad



HHIP 8600-4120 Optical Punch Set

HHIP #ad - Just look d the magnifying lens and align the cross hairs with the mark on your work piece. Package weight : 0045 kilograms. It is indispensable when doing critical layout work. Replace the magnifier with the supplied Punch and give it a tap.
BrandHHIP #ad
ManufacturerABS Import Tools, Inc. #ad
Height6 Inches
Length6 Inches
Width6 Inches
Part Number8600-4120

3. Grizzly Industrial


Grizzly Industrial H5781, Optical Punch Set

Grizzly Industrial #ad - Includes a bull's eye and cross hair lens, a 150 degree and 60 degree center punch and wooden case. Indispensable when doing critical layout work. Just look down the magnifying lens and align the cross hairs with the mark on your work piece.
BrandGrizzly Industrial #ad
ManufacturerGrizzly #ad
Height1.7 Inches
Length4.9 Inches
Width9.5 Inches
Part NumberH5781

4. Fowler


Fowler 52-500-075 Center Punch with 9X Acrylic Lens

Fowler #ad - Working mechanism: the optical center punch features a 9x acrylic lens magnifier with locating center dot and circle that pinpoints where you want your mark; the steel center punch then replaces the magnifier and is hammered for accurate punching.

Set includes: An optical steel punch and an instruction manual. Multi-purpose steel punch: this center punch is ideal for efficient and precision punching of hole locations and can be used for marking, punching, stoking, and riveting. Pre-drilling tool: a steel punch with a conical tip is used to make an indentation that allows you to drill a hole at the same location, safely without slipping.
BrandFowler #ad
ManufacturerFred V. Fowler Company, Inc. #ad
Weight0.3 Pounds
Part Number52-500-075-0

5. Dog River Tools


Dog River Tools Optical Center Punch Precision Set

Dog River Tools #ad - We back all our products and stand behind each of them. It can be used for marking, punching, stoking and riveting. Precision is the key: the optical centering eyepiece magnifies the view and gathers light and so the layout line and crosshair are brightly illuminated from ambient light.

X marks the spot: no more guessing, you can clearly see the crosshairs and place the intersection directly over the desired location, switch over to the metal punch and your results are right on. Check out all our Machinist and Fabrication tools. Saves you time, polycarbonate centering eyepiece that has an 8X magnification, well worth the money: this set comes with a 120 degree center punch, and a 6061 aluminum base.

This tool belongs in your top drawer: Perfect for lying out holes that need to be drilled and tapped. When you get tired of adjusting your punch marks: then Dog River Tools Optical Center Punch is device you need.
BrandDog River Tools #ad
ManufacturerDog River Tools #ad
Part NumberDRT-OCP-100

6. ABN


Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in, ABN Hole Transfer Punch Set for Steel, Wood

ABN #ad - Built to last: constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped cone tips; Flat ends are slightly chamfered at the edge; We recommend using these pieces as transfer punches – not intended to take place of a center punch.

Package contents: transfer punch sets package includes 28 transfer punches plus 3/32-inch to 1/2-inch diameters incremented by 1/64-inch, plus a 17/32-inch diameter punch and 1 5. 25” x 2. 5” x 1. 6” inch 13. 3cm x 6. 4cm x 4. 1cm plastic index stand for easy storage each slot is labeled with SAE sizes for quick identification. Eliminate guesswork: use the abn | 28-piece transfer punches set 3/32-inch to 17/32-inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, and reamed holes; For toolmakers, finding rifle stock screw and bolt hole locations, drilled, tapped, wood, machinists, fabricators, and other surfaces; Useful for a tool for die marker or repair, and hobbyists to use on metal, and even rock painting.

Perfect sizes: 4-7/8-inch 12. 4cm length of each punch with 00025-inch undersize for easy use; standard imperial sae sizes include 3/32”, 11/32”, 1/4”, 11/64”, 15/64”, 29/64”, 1/8”, 1/2”, 13/64”, 25/64”, 5/32”, 31/64”, 7/32”, 15/32”, 9/32”, 3/8”, 7/64”, 5/16”, 3/16”, 9/64”, 21/64”, 17/64”, 13/32”, 7/16”, 23/64”, 27/64”, 19/64”, 17/32”. Easy to use: select one of the punches, hold punch shaft with one hand while gently tapping a hammer not included on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch not included to make a dimple.
BrandABN #ad
ManufacturerABN #ad
Height5.5 Inches
Length5.6 Inches
Weight3.51 Pounds
Width2.75 Inches
Part Number0333
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

7. Astro Pneumatic Tool


Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set

Astro Pneumatic Tool #ad - Pin punch: 3/32-inch by 4-1/4-inch, 1/8-inch by 4-3/4-inch, 3/16-inch by 5-1/4-Inch, 5/32-inch by 5-inch, 1/4-Inch By 5-3/4-Inch. Center punch: 1/8-inch by 5-inch, 3/16-Inch By 6-Inch. Cold chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-Inch, 5/8-Inch By 6-1/2-Inch. Taper punch: 3/32-inch by 5-1/4-inch, 1/8-inch by 5-3/4-inch, 5/32-inch by 6-inch, 3/16-inch by 6-1/4-inch, 1/4-Inch By 6-3/4-Inch.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Pneumatic #ad
Height1.1 Inches
Length9 Inches
Weight1 Pounds
Width9.7 Inches
Part NumberAPT-1600



1/2", HHIP 8600-0041 28 Piece Transfer Punch Set, 3/32"

HHIP #ad - 4-7/8" long. 0025". 3/32-1/2" by 64ths and 11/32". Heat treated tempered tool steel for longer life. Undersize. Black oxide finish.
BrandHHIP #ad
ManufacturerHHIP #ad
Height4 Inches
Length8 Inches
Weight3.57 Pounds
Width4 Inches
Part Number8600-0041

9. Southwire


SOUTHWIRE Southwire Max Punch XD Knockou

Southwire #ad - Quick accurate Knockouts: no hydraulics, no ratcheting, no mess. Torque rated. Lbs. Minimum drill recommendations: 18V cordless, Equivalent of 550 in. Heavy duty: rated to cut 10 gauge mild and stainless steel up to 4". Virtually universal: Thread-in/thread-out removable draw studs universal to fit most common KO dies. Advanced knockout tool used with a cordless drill to draw punch Dies together for fast accurate Knockouts.
BrandSouthwire #ad
ManufacturerSouthwire #ad
Height13 Inches
Length15 Inches
Width7 Inches
Part NumberMPXD-SD
Warranty5 Years Limited