Uncategorized

Top 9 Flaring Tool Kit – Tool Sets

As an Amazon Associate I earn from qualifying purchases.

1. WINMAX TOOLS AUTOMOTIVE

#ad

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

#ad
WINMAX TOOLS AUTOMOTIVE #ad - Universal Hydraulic Flaring Tool Kit. Imperial standard: 3/16, 5/16, 5/8, 1/4, 1/2, 3/8, 3/4, 7/8. Metric standard: 6 mm, 10 mm, 12 mm, 16 mm = 5/8, 19 mm = 3/4, 22 mm Material: Steel. Package included 1x hydraulic dilator 1x Scraper; 1x Cutter; 6x Double Hole Splint; 9x Expander. Pvc environmental protection handle, anti-skid.
BrandWINMAX TOOLS AUTOMOTIVE #ad
ManufacturerWINTOOLS #ad

2. KOLODOGO

#ad

Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Stainless Steel Pipe With Tubing Cutter, Tubing Bender & Ratchet Wrench, Tubing Flaring Swage Tool Kit

#ad
KOLODOGO #ad - Note: the picture is for reference only, the actual product shall prevail. High quality steel material ensures strong strength and long durability. All of these tools are packed in a carry case for easy storage and transportation.

Tubing cutter: suitable for cutting pipe diameter between 3-28mm1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube. Material:aluminum alloy steel cutter body, surface plating. Double flaring tool kit:this flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and thin walled aluminum tubes.

3 in 1 pipe bender: three sizes of tubing 1/4", brass, 5/16" and 3/8". Easy to use:the screw of the pipe cutters provide easy control of cutting pressure for clean cuts. Flare groove rollers make rotation simple and prevent skipping and jumping while cutting. Bending 0-180 degree copper, aluminum, and thin stainless steel pipes in the air conditioner installation and vehicle repair.
BrandKOLODOGO #ad
ManufacturerShinequ-US #ad
Part Numbergj-9

3. Ridgid

#ad

Pipe Flaring Tool for 45-degree flares, RIDGID 23332 345 Flaring Tool

#ad
Ridgid #ad - 45-degree sae flares in 3/16-inch, 1/4-inch, 7/16-inch, 5/16-inch, 1/2-inch, 3/8-inch, and 5/8-inch sizes. A single clamp screw allows easy clamping and removal of tubing. Produces 45-degree flares in soft copper, brass, aluminum and mild steel tubing. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Hardened, smooth flaring cone provides fast, 45-degree flares either single or double lap.
BrandRidgid #ad
ManufacturerRidgid #ad
Height2.5 Inches
Length10 Inches
Weight2.65 Pounds
Width5.1 Inches
Part Number23332
Model23332
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

4. FORSUN

#ad

Flaring Tools Set Tubing Pipe 6 Dies Sizes 1/4-3/4inch 45 Degree Angle Eccentric Cone Type Kit with Copper Brass Aluminum Mild Steel for Water Gas Refrigeration Brake Line Applications

#ad
FORSUN #ad - Silver flaring bars are heat-treated for durability and secure grip on tubing. High standards of quality, strength and endurance in design of rigid flare tool.

Flaring tool kit suitable for soft materials such as copper and aluminum; Recommended by some mini split manufacturers for R-410A flare. A single clamp screw of flare tool provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort. Pipe sizes for the flaring tool are 1/4", 5/8", 1/2", 5/16", 3/8", 3/4". Andflaring tool kit makes a good flare that fits properly on standard fittings with no leaks. Tube flaring tool produces 45 Degree flares in soft copper, brass, aluminum and mild steel tubing.
BrandFORSUN #ad
ManufacturerFORSUN #ad
Part NumberFORSUN-000221

5. HORUSDY

#ad

HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16", 3/4" Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit

#ad
HORUSDY #ad - Produces 45 degree flares in soft copper, brass, aluminum and mild steel tubing. Silver flaring bars are heat-treated for durability and secure grip on tubing. Recommended for soft materials such as copper and aluminum. A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort. Pipe sizes for the flaring tool are 3/16", 5/8", 1/4", 5/16", 1/2", 3/8", 3/4".
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height4 Inches
Length8 Inches
Width6 Inches
Part Number97771

6. VSOON

#ad

Flaring Tools Kit Eccenteic 45-Degree Cone Tubing Flaring Tool Set Includes Tube Cutter Deburring tool HVAC Refrigeration Tools for Copper Pipe Flaring 1/4-3/4 Inch O.D.Tubing By VSOON

#ad
VSOON #ad - The stopper plate provide positive clamping action with minimum distortion. Using the updated structure for brass pipe flaring. Eccentric cone will rebound by itself after the work is finished.

Highly recommended for joints on high pressure systems R410A. Convenient flaring and exact flaring result. Accurate tube flaringheavy duty wide-range bar type flaring tool. Eccenteic flaring tooleccenteic cone type flaring tool with an eccentric flaring cone providing a smooth finish on all flares. Make your repair & flaring work more efficient! specification 1/4", 10mm, 5/8" 16mm, 3/8", 6mm, 1/2", 5/16"8mm, 12mm, 3/4"19mm O. D. Tubing eccentric flaring tool kit. What you getflaring tool, tube cutter, Deburring Tool. Easy to userobust and durable.
BrandVSOON #ad
ManufacturerVSOON #ad

7. DasMarine

#ad

DasMarine Pipe Cone Flaring Tool kit 6 Dies Sizes 1/4'' to 3/4'' 45 Degree Angle Eccentric Cone Type Sets for Water Gas Refrigeration Brake Line Applications

#ad
DasMarine #ad - Single clamp screw with sliding t-bar handle provides for easy clamping and removing of tubing. Large feed screw handle for smooth turning with little effort to save effort when flaring.

Package included: 1 * Flaring Tool Set. Perfect for bending brake and fuel pipes and is also gerat for use in garages, workshops, light wrought iron work. For flaring dies size: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 5/16 inch, 3/4 inch. This flaring tool kit is a perfect tool for pipe flaring and it can be used to make single or double flaring on copper, by metal workers, engineers, plumbers, brass and thin walled aluminum tubes. Hardened steel chrome-finished ensures strength and durability, producing 45-degree flare angle in soft copper, brass, aluminum and mild steel tubing.
BrandDasMarine #ad
ManufacturerDasMarine #ad
Height0.79 Inches
Length0.79 Inches
Weight0.1 Pounds
Width0.79 Inches

8. YaeTek

#ad

YAETEK Swaging Tool Kit – Flaring Tool Kit, Tube Cutter Rachet Wrench Swag Tool, 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8" to 3/4" for HVAC Water Gas Pipe Automotive Plumbing

#ad
YaeTek #ad - Do your brake line job: this yaetek flaring swaging tool kit 10pc tubing flaring kit includes 2 bars 9 sizes with a self-centering, slip-on yoke to make precise and accurate flares and swages; Steel swaging kit includes a swage tool and a tube cutter; The adjustable bar glides on yoke smoothly to adjust the flare to desired size; Lock it by turning the wing nuts tightly;.

Package includes flare adapters, bubble, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying case; Not intended as a double, or inverted flaring tool;. Sizes of this yaetek swaging flaring tool kit: flare adapters 1/8", 1/2", 3/8", 5/8", 3/4" od; swage fittings 3/16", 5/8", 7/16", 5/16", 1/4", 5/16", 3/8", 1/4", 1/2", 3/16", 3/4" inch OD; :.

Material: swivel is made of alloy steel, chrome-plated to assist in reducing friction; Yoke is heat-treated forged steel with max strength and longevity; Built to Last;. A completeflaring tool kit with necessary tools to complete your job; This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel tubing; The ergonomic wide feed handle ensures the Yoke Clamp an easy clamping and removing;.
BrandYaeTek #ad
ManufacturerYaemart Corportation #ad

9. Flexzion

#ad

Flexzion Flaring Tools Set Tubing Pipe 8 Dies Sizes 3/16-3/4inch 45 Degree Angle Eccentric Cone Type Kit with Copper Brass Aluminum Mild Steel for Water Gas Refrigeration Brake Line Applications

#ad
Flexzion #ad - A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort. Recommended for soft materials such as copper and aluminum; Recommended by some mini split manufacturers for R-410A flare. Produces 45 degree flares in soft copper, brass, aluminum and mild steel tubing. Pipe sizes for the flaring tool are 3/16", 5/16", 3/8", 1/4", 7/16", 1/2", 5/8", 3/4". Silver flaring bars are heat-treated for durability and secure grip on tubing.
BrandFlexzion #ad
ManufacturerFlexzion #ad
Height4 Inches
Length8 Inches
Weight3.28 Pounds
Width6 Inches
Part NumberRCT_FLRN_TOL_N808A