Uncategorized

Top 8 Downcut Spiral Bit – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

Carving, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Cut, SpeTool Spiral Router Bits with Down Cut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Industrial quality control to ensure best performance. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-D

2. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide End Mill for Wood Cut

#ad
SpeTool #ad - The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. Solid carbide spiral downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-D

3. Whiteside Router Bits

#ad

Whiteside Router Bits RD1600 Standard Spiral Bit with Down Cut Solid Carbide 1/8-Inch Cutting Diameter and 1/2-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Width3 Inches
Part NumberRD1600
ModelRD1600

4. SpeTool

#ad

SpeTool Spiral Downcut Router Bits with 3/8 inch Cutting Diameter, 1/2 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

#ad
SpeTool #ad - Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
Manufacturerspetool #ad
Part NumberSP-D3/8-1/2-D

5. Milescraft

#ad

Milescraft 2215 1/8-Inch Downcut Spiral Router Bit for Inlays

#ad
Milescraft #ad - 8 inch downcut spiral for inlays or other router projects. Tungsten carbide Construction for long lasting durability. 1/4 inch shank fits most collets. Eplaces 1/8 inch downcut spiral router bit that came with the Design/Inlay Kit.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Weight0.01 Pounds
Part Number2215
Model2215
WarrantyNinety Day Limited Warranty.

6. Yonico

#ad

Yonico 36314-SC 1/4-Inch Dia. 3 Flute Low Helix Downcut Spiral End Mill CNC Router Bit 1/4-Inch Shank

#ad
Yonico #ad - For use on cnc, table mount and handheld routers. Polished to a mirror finish from a solid carbide rod for precision & accuracy. For cnc milling and routing on challenging materials where a clean top surface edge of material is required. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
BrandYonico #ad
ManufacturerYonico #ad
Height0.25 Inches
Length2.5 Inches
Weight0.06 Pounds
Width0.25 Inches
Part Number36314-SC
Model36314-SC

7. Yonico

#ad

Yonico 32012-SC 1/8-Inch Diameter O Flute Downcut Spiral End Mill CNC Router Bit 1/4-Inch Shank

#ad
Yonico #ad - This o-flute bit has a cutting diameter of 1/8", cutting height of 1/2", overall length 2" and 1/4" shank. For cnc milling and routing on aluminum and plastics where a clean top surface edge of material is required. Polished to a mirror finish from a solid carbide rod for precision & accuracy. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. For use on cnc, table mount and handheld routers.
BrandYonico #ad
ManufacturerYonico #ad
Height0.1 Inches
Length2 Inches
Weight0.04 Pounds
Width0.25 Inches
Part Number32012-SC
Model32012-SC

8. Freud

#ad

Freud 1/4" Dia. Down Spiral Bit with 1/4" Shank 76-102

#ad
Freud #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Cuts all composition materials, hardwoods, plywoods, and softwoods.
BrandFreud #ad
ManufacturerFreud #ad
Height0.8 Inches
Length3.9 Inches
Weight0.06 Pounds
Width0.8 Inches
Part Number76-102
Model76-102