As an Amazon Associate I earn from qualifying purchases.
Watts Premier #ad - Can be easily retrofitted to upgrade virtually any existing RO system and the pump eliminates the need for hydraulic shutoff valves and can be used to replace booster pumps in well water applications.
Includes quick connecting fittings, pump, hoses, 1/4 inch and 3/8 inch adapters, and bracket. Improves water savings and capacity of your current RO by using only the available energy from the brine water i.
AltonFilter #ad - Dimension 2. 5” diameter, no bpa conform toe iso 9001:2000 Manufacturing standard Removes sediment, 9. 84” length”, standard size fits standard 10” filter housing canister Made with Pure Polypropylene, dirt, sand, rust Replace every 12 months.2nd & 3rd stage: activated coconut shell carbon block for extra capacity 5 micron rating 6, odor, VOC, herbicide, chlorine, chloramines, taste, pesticide, 9.
84” length activated carbon block filter made with 100% high quality coconut shell carbon. Dimension: 2” diameter and 10” length, standard size Inlet / outlet are 1/4" quick connect fitting Improves taste, remove odor Replace every 12 months.
1st stage: multi-layer 5 micron sediment filter for more dirt holding capacity and extended service life. Save money and time, 100% compatible filters, extended service life. Better bonding and structure designed minimize channeling effect and extend service life Removes sediment, THM, 000 gallons RO water usage capacity Dimension 2. 75” diameter, 000 gallons chlorine reduction capacity or 2, Replace every 12 -18 months. 95% rejection rate, improved structure designed for greater efficiency and extended service life Consistent performance Replace every 3 to 5 years.
AQUATICLIFE #ad - The sealed pressure pump is low-voltage and powered by the included transformer, which ensures safe, quiet operation. Note: all smart buddie booster Pumps are water tested at the factory before packaging so there might be some water inside the unit when unboxed.
The smart buddie booster pump includes an internal automatic flush valve that flushes the membrane for 18 seconds every time the unit is activated. A built-in low pressure switch turns off the smart buddie booster pump if water pressure is less than 7.
APEC Water Systems #ad - Premium long-lasting filters remove up to 99% of contaminants such as chlorine, as well as toxic fluoride, lead, nitrates, VOCs, odor, taste, arsenic, heavy metals and 1000+ contaminants. Wqa certified to provide unlimited clean, refreshing crisp tasting water superior to bottled water.
Max total dissolved Solids - 2000 ppm. Feed water pressure 40-85 psi. System comes with 100% lead-free designer faucet, plus certified JG food grade tubing and parts to provide safe, contamination-free pure water.
America's no. 1 rated water filter brand with 20 years of success guaranteeing trouble free, dependable, noise-free system for long lasting, pure drinking water. Supreme quality - designed, engineered, and assembled in USA to guarantee water safety & your health. High quality leak-free quick connect fittings require no extra lock clips to seal leak - not relying on water leak detector to protect your home like other brands.
Aqua Tec #ad - This kit is not for misting, line boosting, ice maker line, water transfer. This pump kit is designed for increasing water supply pressure to a RO water system. For most systems this kit will work fine. This pump is good for under 100 gpd gallons per day RO systems Most home drinking RO systems are under 100 GPD.
Automatic on/off operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank.
This kit does not come with the optional eso electric-shut-off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. This pump is designed to increase the water supply pressure to a ro water system.
Aquatec #ad - This kit is good for 1/4" od tubing or 3/8" od tubing since we include 3/8" to 1/4" reducer fittings for pump and for pressure switch. This kit does not come with the optional eso electric-shut-off solenoid valve, so it would rely on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full.
Automatic on/off operation. This pump is designed to increase the water supply pressure to a ro water system. For most systems this kit will work fine. But if your existing shut off valve is interfering with the pump then you need to get a ESO solenoid valve with Aquatec plug, 24VAC.
The pressure switch would sense the pressure in the output line, and then when you start using water and tank pressure drops, the pump would shut off, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, then the pump turns back ON to replenish the tank. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 200 GPD gallons per day RO systems.
Flojet #ad - Self-priming up to 9 feet suction lift, dry running, three chambers. A genuine flojet product, don't settle for anything less. Reduces need for accumulator tank.
1. Watts Premier
#adWatts Premier WP560041 Permeate Pump with Install Kit for RO Water Filtration Systems
#adIncludes quick connecting fittings, pump, hoses, 1/4 inch and 3/8 inch adapters, and bracket. Improves water savings and capacity of your current RO by using only the available energy from the brine water i.
More information #ad
E. No electricity required, the pump forces the purified water into the storage tank. Improves recovery rates by as much as 400% and reduces waste water by as much as 80%. This kit will fit a standard 4 or 5 stage unit, including the WP-5, WP-4V or the RO-Pure but NOT the ZeroWaste RO System or Booster Pump Technology.| Brand | Watts Premier #ad |
| Manufacturer | Watts #ad |
| Height | 12 Inches |
| Length | 8 Inches |
| Width | 12 Inches |
| Part Number | 560041 |
| Model | WP560041 |
More information #ad
2. AltonFilter
#ad100% compatible + instructions and free tech support, RO-45, provided by Alton, Compatible APEC Ultimate Complete 5 stage high capacity filter set for model ROES-50, RO-PUMP RO Reverse Osmosis systems
#ad84” length activated carbon block filter made with 100% high quality coconut shell carbon. Dimension: 2” diameter and 10” length, standard size Inlet / outlet are 1/4" quick connect fitting Improves taste, remove odor Replace every 12 months.
More information #ad
4th stage tfc-50 standard size ro membrane designed to fit the same membrane housings dimension: 1. 75” diameter, 2” diameter with seal x 11. 74” length, standard size fits standard RO membrane housing canisters High quality membrane material supplied from USA manufacturer. 1st stage: multi-layer 5 micron sediment filter for more dirt holding capacity and extended service life. Save money and time, 100% compatible filters, extended service life. Better bonding and structure designed minimize channeling effect and extend service life Removes sediment, THM, 000 gallons RO water usage capacity Dimension 2. 75” diameter, 000 gallons chlorine reduction capacity or 2, Replace every 12 -18 months. 95% rejection rate, improved structure designed for greater efficiency and extended service life Consistent performance Replace every 3 to 5 years.
| Brand | AltonFilter #ad |
| Manufacturer | AltonFilter #ad |
| Warranty | Manufacturer warranty of 30 days. |
More information #ad
3. AQUATICLIFE
#adAQUATICLIFE Smart Buddie Booster Pump for 50-100 GPD Reverse Osmosis Water Filter Systems RO/DI Units, White, 12 Piece Set 540292
#adThe smart buddie booster pump includes an internal automatic flush valve that flushes the membrane for 18 seconds every time the unit is activated. A built-in low pressure switch turns off the smart buddie booster pump if water pressure is less than 7.
More information #ad
25 psi, extending the life of the pump. The smart buddie booster pump is quiet, easy to install, and can significantly increase water output and improve water quality. Increased water pressure improves the efficiency of the unit less waste water as well as the quality of the water; RO units thrive on pressure.| Brand | AQUATICLIFE #ad |
| Manufacturer | Aquatic Life #ad |
| Height | 7.75 Inches |
| Length | 11.75 Inches |
| Weight | 7.7 Pounds |
| Width | 5.75 Inches |
| Part Number | 540292 |
| Model | 540292 |
| Warranty | Manufacturer Warranty |
More information #ad
4. APEC Water Systems
#adAPEC Water Systems ROES-50 Essence Series Top Tier 5-Stage Certified Ultra Safe Reverse Osmosis Drinking Water Filter System
#adMax total dissolved Solids - 2000 ppm. Feed water pressure 40-85 psi. System comes with 100% lead-free designer faucet, plus certified JG food grade tubing and parts to provide safe, contamination-free pure water.
More information #ad
Pipe size: 1/4 inches. 2 year extended manufacturer warranty is available upon registration. Comes with all parts and industry's best instructions and videos for an easy DIY experience. America's no. 1 rated water filter brand with 20 years of success guaranteeing trouble free, dependable, noise-free system for long lasting, pure drinking water. Supreme quality - designed, engineered, and assembled in USA to guarantee water safety & your health. High quality leak-free quick connect fittings require no extra lock clips to seal leak - not relying on water leak detector to protect your home like other brands.
| Brand | APEC Water Systems #ad |
| Manufacturer | APEC Water Systems #ad |
| Height | 17.5 Inches |
| Length | 16 Inches |
| Weight | 25 Pounds |
| Width | 5.25 Inches |
| Part Number | ROES-50-A |
| Model | ROES-50 |
| Warranty | 1 Year APEC |
More information #ad
5. Aqua Tec
#adAquatec 6800 Booster Pump Kit for up to 100 GPD home RO reverse osmosis water filter system Standard or Manifold, 6840-2J03-B224 B221 Made In USA, pressure switch PSW-240, transformer, includes pump
#adAutomatic on/off operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank.
More information #ad
Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump kit includes aquatec pump 6840-2j03-b224 with heavy duty steel base plate with damper, 1/4" inlet/outlet for pump and pressure switch, transformer 110V USA plug, PSW-240 pressure switch, detail instruction. This kit does not come with the optional eso electric-shut-off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. This pump is designed to increase the water supply pressure to a ro water system.
| Brand | Aqua Tec #ad |
| Manufacturer | Aquatec #ad |
| Part Number | SET68-PSW240 |
More information #ad
6. Aquatec
#adAquatec 8800 Booster Pump Kit for up to 200 GPD RO Reverse Osmosis water filtration system for both standard and manifold type systems 8852-2J03-B424 PSW-340 Made in USA
#adAutomatic on/off operation. This pump is designed to increase the water supply pressure to a ro water system. For most systems this kit will work fine. But if your existing shut off valve is interfering with the pump then you need to get a ESO solenoid valve with Aquatec plug, 24VAC.
More information #ad
This pump kit includes aquatec high flow booster pump 8852-2j03-b424 with heavy duty steel base plate with damper, 4 reducer fitting 3/8" to 1/4", PSW-340 pressure switch, 110V Transformer, detail instructions. The pressure switch would sense the pressure in the output line, and then when you start using water and tank pressure drops, the pump would shut off, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, then the pump turns back ON to replenish the tank. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 200 GPD gallons per day RO systems.
| Brand | Aquatec #ad |
| Manufacturer | Aquatec #ad |
| Height | 4 Inches |
| Length | 7 Inches |
| Width | 4 Inches |
| Part Number | 8852SET-PSW |
More information #ad
7. Flojet
#ad12 volt DC, 2.9 GPM 50 PSI, Flojet 03526-144A Triplex Diaphragm Automatic Water System Pump
#adMore information #ad
Corrosion resistant materials. Soft noise absorbing mounts. Snap-in port fittings, built-in bypass for less pulsation. Pressure switch setting: 3. 4 bar.| Brand | Flojet #ad |
| Manufacturer | Xylem #ad |
| Height | 4 Inches |
| Length | 9 Inches |
| Weight | 2.6 Pounds |
| Width | 4 Inches |
| Part Number | 03526144A |
| Model | 03526144A |
More information #ad
8. Generic
#adAquatec ERP1000 Permeate Pump with 1/4 OD John Guest Tubing Connectors, Mounting Clip, and Screws Black
#adGeneric #ad - Increase water production rate by up to 400%. No electricity Required. Reduce wastewater to drain by up to 80%. Reduce water contaminants, reduce TDS, and extend membrane life. Reduce ro tank fill time by up to 4x. Powered by hydraulic pressure of brine.More information #ad
| Brand | Generic #ad |
| Manufacturer | JettWaterSystems #ad |
| Part Number | ERP-1000-MC |
More information #ad
