Top 6 Baseboard Heater Cover Replacement – Heaters & Heater Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Baseboarders

#ad

Baseboarders Basic Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White 4 ft, Cover + L&R End Caps

#ad
Baseboarders #ad - All baseboarders products are galvanized steel with a powder coated semi-gloss white finish. They will not retrofit to existing baseboard heaters without a Basic Series Panel. Panels are fabricated in 24 gauge galvanized steel. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures.

If necessary, panels can easily be cut to fit your heater length. Baseboarders basic series end caps, and couplers are only compatible with our own branded Basic Series panels. Snap the baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. Baseboarders basic series set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. Baseboarders products will become just as hot as the original.

The panel holes are 1/8” in diameter to allow proper airflow. With a firm push, the assembly slips into place over the original baseboard heater. Easy diy installation- no tools or hired help is needed. Intended for hydronic hot water baseboard heaters, but will work for electric baseboard heaters. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, corners, ultra clean look. Endcaps are fabricated in 22 gauge galvanized steel.
BrandBaseboarders #ad
ManufacturerBaseboarders #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters

2. NeatHeat

#ad

NeatHeat 4ft Baseboard Heat Front Cover

#ad
NeatHeat #ad - End caps and other accessories sold separately. Not for electric baseboard. Can be cut with common household tools. Easy install: Does not require any special tools. Fits over many common baseboard brands.
BrandNeatHeat #ad
ManufacturerCreative Hydronics Intl, Inc. #ad
Height6.25 Inches
Length3 Inches
Weight3.7 Pounds
Width48 Inches
Part NumberFC 30/07-04 BW
ModelFC 30/07-04 BW

3. Baseboarders

#ad

No Accessory, Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White 2 ft, Cover

#ad
Baseboarders #ad - This ensures the best fit, corners, and safety design- both child proof and pet proof- for a modern, ultra clean look. Baseboarders premium series zero clearance end caps are symmetrical, there are no left or right sides. They will not retrofit to existing baseboard heaters without a Basic Series Panel.

With a firm push, the assembly slips into place over the original baseboard heater. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Panels are fabricated in 24 gauge galvanized steel. Designed to snap onto the ends of Baseboarders Premium Series panels. The panel holes are 1/8” in diameter to allow proper airflow. Endcaps are fabricated in 22 gauge galvanized steel. All baseboarders products are galvanized steel with a powder coated semi-gloss white finish.

Used when the original back plate terminates within ½” of adjacent wall. Snap the baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. Easy diy installation- no tools or hired help is needed. Baseboarders products will become just as hot as the original. Baseboarders premium series end caps, and couplers are only compatible with our own branded Basic Series panels.
BrandBaseboarders #ad
ManufacturerBaseboarders #ad

4. EZ-SNAP

#ad

EZ Snap Covers 7 1/2" White Baseboard Heater Cover Galvanized Steel 4 Ft Kit with 2 Closed End Caps & 3 Brackets

#ad
EZ-SNAP #ad - Safe edge technology Keeps Wandering Hands Safe. 7 1/2 inches in Height. 20-gauge galvanized Steel Construction. Top measures 2 1/2 Inches Deep.
BrandEZ-SNAP #ad
ManufacturerEZ Snap Covers #ad
Height8 Inches
Length48 Inches
Weight9 Pounds
Width3 Inches
Part NumberKSW4C
ModelPARENT

5. Baseboarders

#ad

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White 3 ft, Cover, No Accessory

#ad
Baseboarders #ad - Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Snap the baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. Baseboarders products will become just as hot as the original.

Endcaps are fabricated in 22 gauge galvanized steel. With a firm push, the assembly slips into place over the original baseboard heater. They will not retrofit to existing baseboard heaters without a Basic Series Panel. Baseboarders elliptus series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. All baseboarders products are galvanized steel with a powder coated semi-gloss white finish.

Easy diy installation- no tools or hired help is needed. Intended for hydronic hot water baseboard heaters, but will work for electric baseboard heaters. Baseboarders elliptus series endcaps closed ec005-lf, rt-wht, open ec006-lf, rt-whT, Zero ZC005-WHT are sold separately When combined with end caps the panel can span between 36”-39.5”. Baseboarders elliptus series panel only includes the replacement heater panel cover. The panel holes are 1/8” in diameter to allow proper airflow.
BrandBaseboarders #ad
ManufacturerBaseboarders #ad

6. EZ-SNAP

#ad

EZ Snap Covers 8 Foot Long Standard Height 7 1/2" Baseboard Heater Cover Kit with 2 Closed End Caps

#ad
EZ-SNAP #ad - Ez snap covers have a lifetime warranty against rust. Our covers fit 95% of all existing hot water baseboard radiator heaters. End caps are 18 gauge thickness. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler; 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler; 12’ is 2 6’ covers with a coupler; 13’ is 1 6’ and 1 7’ and a coupler; 14’ is 2 7’ covers and a coupler.

Fits top plate up to 2 1/2 Inches Deep. If they rust, send them back and we will replace them. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. Ez snap covers are 20 gauge galvanized steel with white epoxy powder coating. Lengths over 8’ include a coupler to join the panels together.
BrandEZ-SNAP #ad
ManufacturerEZ-SNAP #ad
Height5 Inches
Length52 Inches
Weight15 Pounds
Width10 Inches
Part NumberKSW8C
ModelKSW8C