Top 4 Hurricane Ties For Rafters – Hardware

As an Amazon Associate I earn from qualifying purchases.

1. Simpson Strong-Tie


Simpson Strong-Tie H2.5A 18-Gauge Hurricane Tie 100-per Box

Simpson Strong-Tie #ad - Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces. Also suitable for connecting 2X deck joists on top of a perpendicular beam. Galvanized for extra corrosion resistance. Designed to provide a connection between trusses/rafters and the top plate of the wall to resist high-wind/seismic forces. Made from 18 gauge steel.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson #ad
Height10.38 Inches
Length8 Inches
Weight11.2 Pounds
Width8.5 Inches
Part NumberH2.5A-100



For Roofing Trusses Wood Timber Connectors, 8Pcs Steel 18-Gauge Hurricane Tie ,Hot Dip Galvanized Joist Hangers Thickness 1.2mm Fit 2X Truss to Rafter Connector

GBGS #ad - Carbon steel sgc440 material, good impact resistance, surface hot-dip galvanizing, wear resistance and corrosion resistance.18 gauge hurricane tie designed to provide a connection between trusses/rafters and the top plate of the wall to resist high-wind/seismic forces Joist hangers. Thickness: 18 gauge1. 2mm, screw holes: φ4 mm. Suitable for connecting 2X deck joists.
BrandGBGS #ad
ManufacturerGBGS #ad
Height0.91 Inches
Length5.31 Inches
Width5.31 Inches



316 Stainless Steel Hurricane Ties H5 18 Gauge RT5-SS H5SS USA Made Left & Right 5 Pairs

RAW PRODUCTS CORP #ad - Each quantity ordered will come with a equal number of left and right ties ie, QTY-2 is one left H5 and one right H5. Instead, install them diagonally across from each other. H3 hurricane ties are installed across two different pieces of wood: the top plate or wall plate and a rafter.

All hurricane ties in this selection are made of 316 stainless steel for superior corrosion resistance. Please note: depending on pitch, rafter, birdsmouth notching may be required with some models to enable installers to fill all nail holes. H3 ties are installed by connecting the two pieces of lumber, securing them together see image for example. Hurricane tie: h5 manufacturer usp part number: rt5-ss simpson part number: h5ss uplift load lbs. 450 lateral Load Lbs.

225 dimensions w x h x l: 3-9/16” x 2-1/2” x 3-3/8". Important: h5 ties are sold in pairs. 316 stainless steel hurricane ties should only be installed with 316 stainless steel nails to maintain the manufacturer's warranty. Caution: do not install Hurricane ties into both sides of a given truss, or joist. Doing so may cause damages in the wood and risks collision of the nails see image. 316 stainless steel is well suited for applications in severe, harsh, or marine or saltwater environments.
ManufacturerUSP #ad
Height1 Inches
Length1 Inches
Weight1 Pounds
Width1 Inches
Part Number6110-010-0006

4. Simpson


100 Count Simpson Strong-Tie H1 Hurricane Tie

Simpson #ad - Install with six 8d x 1-1/2" nails & Four 8D Nails, Made in USA. Galvanized for Extra Corrosion Resistance,. Can be installed With Flanges Facing Inwards. Designed to help counter the effect Of High Wind & Seismic Events On A Structure. Provides resistance To Uplift & Lateral Forces.
BrandSimpson #ad
ManufacturerSimpson Strong Tie #ad
Part NumberH1