Top 10 Vintage Lamp Socket with Switch – Pendant Light Fixtures

As an Amazon Associate I earn from qualifying purchases.

1. Simple Deluxe


Suitable E26 Lamp Socket, Simple Deluxe 15 Feet Single Bulb Vintage Hanging Pendant Light Cord Kit with Dimmer Switch for Room DIY, Twisted Black Cloth Rope, 1

Simple Deluxe #ad - Wide applications: the pendant light kit is ideal for bedroom, stairs, plants. Warning: please don't use this product in a wet environment. This vintage antique style pendant light cord is perfect in traditional and industrial homes, bringing a vintage look to any area.

Lamp holder length: 3. 5 inch; width: 1. 26 inch. Max wattage 200w maximum power of bulbs:<60W; working voltage range: AC 120V. Single light kit details: material: wire: polyester + brass wire; plug: pvc; lamp holder shell: aluminum. Vintage bulb cord kit: e26 socket suitable for e26 blubs, dimmer switch at the 095m/6. 4 feet from the plug, 2 prongs plug. Package included: 1 x 15 feet vintage single light sockets pendant hanging light cord, 2 x ceiling hooks and 2 x cord hooks.

Note: do not pull the two metals shrapnel in the lamp cap, one is vertical and the other is inclined at 45°, the pulling may cause a short circuit and destroy the bulb. Easy to hang: easy to install the light bulb anywhere. The switch of the lamp is on the lamp holder, and the gear switch can adjust the brightness according to ambiance and mood. Perfect for outdoor decoration, kitchen, garage, like weddings, living room, basement, parties and yard barbecue.
BrandSimple Deluxe #ad
ManufacturerSimple Deluxe #ad
Model15 Feet Single Bulb Vintage Hanging



E26/ E27 Solid Brass Industrial Light Socket Vintage Edison Pendant Lamp Copper Holder with Switch Antique Brass, EFINEHOME 2 Pack Lamp or Fixture Replacement

EFINEHOME #ad - Medium e26/ e27 standard base, ul listed, rated for up to 100 Watts / 85-220 Volts. Popular turn knob, on-off style in phenolic black finish with 1/8 IP female threaded base caps. Diy vintage brass medium Base Light Socket with Switch on/off Holder. Lamp socket which is easy to use and will fit with any wire and standard light bulb or Edison bulb. This is a good supply for creating vintage or industrial style lighting or just to replace a socket that has gone bad in a lamp or hanging fixture.
ManufacturerEFINEHOME #ad
Part Number87212527

3. Kangkangk


Mising Light Base E26/E27 Solid Lamp Base Socket Vintage Edison Bulb Base Lamp Holder Industrial Bulb Pendants 2 Way Knob Kangkangk Antique Brass

Kangkangk #ad - Easy to use, just twist into existing socket. Easy to install, you just need to screw off the base to access the wire connections inside. Safe quality: our lamp holder is made of high quality and fireproof material.

Why choose us! you are on the right place! we are specializing in manufacturing and selling various kinds of lamp holder with the great aspirations to fully meet the diverse needs of customers. This item can be used to many kinds of light fixtures. 100% happy satisfaction: it is supported 24-hour customer support. Note: our normal delivery time is within 15-20 days.

No fire hazard, heat resistant, corrosion resistant. So, our enthusiastic seller staffs always ready to serve you. Easy to use: fits for all standard bulbs. Great function: perfect for restoring old lamps and lights or making homemade lighting fixtures. If you ordered our item, feel free to contact us any time, we can not cancel your order which is being shipped on the way.
BrandKangkangk #ad
ManufacturerKangkangk #ad

4. Onite


2 PCS UL Listed E26 Type 1/8 inch Pipe Thread US-Standard Screw Basic Metal Lamp Socket with Pull Chain Switch Bronze, Onite Vintage Lamp Socket

Onite #ad - Pull-chain switch on/off --please note that this adapter is not 3-way switch!!!!! Only ON/OFF switch. Ul listed; basic aluminum shell Body US-Standard E26 Lamp Holder. Rated current: 4 a; rated voltage: 110-250 V. Heat resistance Temperature 250 ℃. Package: 2 pieces sockets, 2 pieces M10 Cable Grips.
BrandOnite #ad
ManufacturerOnite #ad
Part Number71-E26MTSWPL2P-BZ



Rextin 4pcs E26 Vintage Lamp Socket with on/Off Switch Pendant Bulb Socket E26 E27 Vintage Bulb Holders Aluminum for DIY Lighting Bulbs  Industrial Decorative 4, ON/Off Antique Brass

REXTiN #ad - Package include: 4 x e26 Vintage bulb holders with on/off Switch. Voltage : 12v-250v current : 0- 4A, color:Antique Brass. This e26 vintage lamp socket with on/off switch, Fits any Incandescent, Halogen LED Bulb for DIY pendant lighting projects Bulbs  home or Industrial Decorative. Aluminum cover, beautiful design and High Temperature Resistant reliable, ul listed, long service life pendant vintage bulb holder. Easy to use.
BrandREXTiN #ad
ManufacturerREXTiN #ad

6. superdream


With Golden Key Switch Multi-Function Socket 1 Pack, Superdream Brass Screw Thread DIY Light Socket Vintage Copper Edison Retro Pendant Lamp Holder for E26 E27 Light Bulbs

superdream #ad - A minimalist e27 pendant lamp holder with metal bodied cord grip Except Bakelite which has a plastic cord grip For wire and E26/E27 screw light bulbs and lamps connected, power lighting, display fixtures.

Very great for quality; saves electricity-extends bulb life. With hard paper in the socket inner, seismic and impact resistance. This is electrifier medium base copper shell lamp holder, Safety locking screw in base for secure fitting. Easy install, didn't have any trouble just figuring it out as you went. These lamp holders are ideal for bare bulb features with E26/E27 Edison Screw Bulbs.
Brandsuperdream #ad
ManufacturerSuperdream #ad
Height1.97 Inches
Length3.15 Inches
Width1.97 Inches
Part NumberLight Sockets 22821
ModelBulb Holders



Phenolic Medium Base Light Socket with Push Switch, 3 Pack E26 Medium Screw Light Holder Black Edison Retro Pendant lamp holder

TWDRTDD #ad - Easy to install:with brass and silver screws for black and white wire connection, then screw-in edison vintage lamp sockets are easy to put various kinds of bulbs on, easily matching any styles of decoration. Power – this lamp socket has an electrical rating of 250VAC and 250W. Medium base lamp socket with push on/off to fix or create a new Floor and Table Lamps or light fixture, DIY Project, UL Listed. It consists of 3 pieces: a bottom cap, an interior, a top cap, and cord grips. The bottom cap is threaded to accept a 1/8 IP rod or nipple.
BrandTWDRTDD #ad
ManufacturerLINGYAO #ad



Antique Look for Industrial, 4 Packs Color: Champagne Gold, Light Sockets Replacement, 600℃ Heat Resistant, DIY Lighting, Pendant Lamp Holder, Decorative, DiCUNO E26 Edison Vintage Lamp Socket

DiCUNO #ad - Color: Champagne Gold. 2 lampshades addable. Installation easy to install. Connect the wires correctly to the positive/negative pole and then assemble all the parts together. Features high-quality ce and rohs certified; sturdy bulbs could be held tightly; Heat-resistant High up to 600℃; Material Aluminum cover and ceramic lamp holder.

Description dicuno e26 vintage socket, compatible with e26 medium base bulbs especially vintage Edison bulbs, with antique and industrial appearance, suitable for decorative DIY pendant lighting projects. Different lampshades added and wire length adjusted could bring various decorative effects.

Create antique and classical atmosphere to modern life. An installation instruction is attached for your reference. Application 1 used most commonly with e26 vintage edison bulbs and for pendant, retro lighting. Any problem please feel free to contact us. Warranty 1-year warranty and immediate customer service.
BrandDiCUNO #ad
ManufacturerDiCUNO #ad
Height1.98 Inches
Length3.49 Inches
Width1.98 Inches
Part NumberUS-E26-VS-CG-4P
Warranty1-year warranty and immediate customer service.



Industrial 15ft Pendant Light Cord, Hanging Light Kit with Switch Plug in Vintage Fabric Lamp Cord with Twisted Hemp Rope Pendant Lights Socket Set E26 E27 for Pendant Lamp Farmhouse Lamp Cable DIY

FRIDEKO HOME #ad - Easy to diyyou can make your own hanging light fixture by adding a vintage looking metal shade to it and it would add different fun to your lighting needs, compatible with E26 E27 incandescent / LED / CFL bulb NOT Included; Max Wattage: 60W.

Vintage stylemade of natural hemp, this pendant light kit is more durable; UL certified light socket and cord ensure your safe use; Perfect in traditional and industrial homes, bringing an old-fashioned look to any area. Customer satisfacetionthis item does not include the bulb; if you feel that this Pendant Light Cord didn’t live up to your expectations, feel free to contact us any time. Widely compatiblethis lamp cord is an ideal fixture for providing creativity and welcoming to your Kitchen or Home; You can use it as a mini ceiling pendant light, which is ideal for your bedroom, restaurant, kitchen island, living room, coffee shop and more!.

Easy to use & adjustablewith adjustable 15ft hemp rope cord, you can adjust the fixture length to your needs; Install pendant light without any tools: just put in a bulb and click the On / Off switch, which you can control the light easily.
ManufacturerFRIDEKO HOME #ad
Weight0.66 Pounds
Part NumberMETLL121-077-01-UK

10. ZHMA


Single Vintage Bulb Cord Edison Socket lamp Plug Pendant Light with Dimmer,ZHMA Industrial DIY Lamp Holder E26/27 Base,4.5M14.8FT Twisted Black Cloth Cord Hanging Light Fixturewith Swith and Plug

ZHMA #ad - You can place this alone or you can add them in groups. We have strict control over the quality of our products. Lamp kit has its own on/off switch, suitable for standard E26 / E27 medium size base mount bulbs. Easy to install.

Zhma pays attention to the customer's experience. Plug in pendant light is fully dimmable, 14. 8ft light bulb cord and in-line on/off dimming switchallows you to adjust the brightness of the light as needed. It has a diameter 40mm ring thread with a width 10mm screw mounting thread that can be removed to allow the fitting of a lamp shade. No additional assemble process, convenient and practical. We promise a 12-month warranty on the products.

If you encounter any problems during the use, please contact us by email. Fits incandescent, CFL and LED bulb ect. Does not include the bulb. This lamp cord is an ideal fixture for providing creativity and welcoming to your Kitchen or Home. The bulb cord perfect for the bar, dining room, loft, island, study, kitchen, bedroom and more!. All mounting hardwares are included in the package.
BrandZHMA #ad
ManufacturerZHMA #ad
Weight0.35 Pounds
Part NumberUS5-SwitchX10-PJ-P