Top 10 Portable Table Saw – Table Saws

As an Amazon Associate I earn from qualifying purchases.

1. Skil

#ad

SKIL 15 Amp 10 Inch Table Saw, TS6307-00

#ad
Skil #ad - 2-47° bevel capacity – cuts between 2 positive stops at 0 and 45 degrees with quick release lever. Integrated folding stand – legs quickly fold in to provide portability and convenient storage. 4x4 cutting capacity – cuts material up to 4x4 at 90 degrees. Parallel blade alignment – available micro-adjustment of blade so that it is parallel to rip fence and miter slot. Rack and pinion fence rails – ensures fence stays parallel to blade for fast, smooth, and accurate cuts. Dust port elbow – redirects dust to a container for easy cleanup.
BrandSkil #ad
ManufacturerSKIL #ad
Part NumberTS6307-00
ModelTS6307-00
Warranty3 Year Limited Warranty

2. DEWALT

#ad

DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch DWE7485

#ad
DEWALT #ad - Power: 15 amp, 5800 rpm motor. Portability: Compact size for ease of transportation and storage. Easy adjustments: rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. Variety of cuts: 24. 5 inches of rip capacity for ripping 4x8 plywood or OSB sheets. Onboard storage: onboard storage provides easy access to the site pro guarding components and push stick when not in use. Guaranteed tough: Metal roll cage ensures job site durability.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height13 Inches
Length22.75 Inches
Weight54 Pounds
Width22.75 Inches
Part NumberDWE7485
ModelDWE7485

3. BOSCH

#ad

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10

#ad
BOSCH #ad - Portability: works seamlessly with the included lighter GTA47W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down. Soft-start circuitry – manages intensity of motor start-up and minimizes the likelihood possibility of tripping a circuit breaker.

Powerful table saw has 15-amp saw with 4. 0 max hp and 3, 650 rpm, for rip-cutting and cross cutting of fine and rough materials. Constant response circuitry: Helps maintain speed under load. Dimensions: 32. 5" d x 27" l x 13" h, product weight: 94 lb. Smart guard system: riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut. Restart protection: Helps to avoid accidental startup.
BrandBOSCH #ad
Manufacturer4100XC-10 #ad
Height13 Inches
Length27 Inches
Weight109 Pounds
Width32.5 Inches
Part Number4100XC-10
Model4100XC-10

4. KSEIBI

#ad

Sliding Miter Gauge Cutting Speed Up to 4800 RPM, Bench top Portable Table Saw KTS 20-254, KSEIBI 10-Inch Woodworking Table Saw 15Amp with Metal Stand, Saw Blade Adjustment 0°-45° Angle Bevel Cut

#ad
KSEIBI #ad - Make rip cuts, flooring, crosscuts, molding or dimensional lumber this miter saw make fast, 45° bevel cuts and compound cuts in hard wood, miter cuts, smooth cutting.

Durable and portable machine for all your wood cutting needs. Fast, smooth, and accurate with its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0° and 45° degrees. Powerful bench top tool the electric powerful circular saw tool with a rating 15 Amps can perform great and easily work through hardwood, gives you a fine and fast cutting with 5000 rpm cutting speed, wood fiberboard and similar materials, it's ideal tools for the jobsite or workshop.
BrandKSEIBI #ad
ManufacturerKSEIBI #ad
Part Number714311
ModelKTS 20-254

5. Rockwell

#ad

And 7 Accessories – RK7323, Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge

#ad
Rockwell #ad - On-board accessory storage when the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw. There’s even a built-in carry handle.

Tool-less blade change uses any brand’s standard 4” t-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, aluminum, plastic, and metal. Sets up in seconds take this table saw to the job site or move it around the workshop. 0-60° miter cuts with the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects. Cuts like a full-size with the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts. Safety switch prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut.
BrandRockwell #ad
ManufacturerPositec USA #ad
Height8.3 Inches
Length16.1 Inches
Width17.5 Inches
Part NumberRK7323
ModelRK7323
Warranty3 year Limited Consumer Warranty

6. Goplus

#ad

Aluminum Table, Goplus Table Saw, 45º Double-Bevel Cut, 10-Inch 15-Amp Portable Table Saw, 36T Blade, Cutting Speed Up to 5000RPM, Benchtop Table Saw with Metal Stand, Sliding Miter Gauge

#ad
Goplus #ad - And it can be used without the stand which is convenient for outdoor wood cutting. Double bevel cutting & adjustable heightfeaturing the double bevel cutting from 0-45°, convenient for different needs, such as slotting, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2".

And there’s a large hand wheel to control the blade lifting, ripping or cutting. 36t carbide-tipped blade with transparent guard and riving knife protects you from accidental hurt and flying chips. Miter gauge & rip fencesliding miter gauge can be adjusted from -45° to 45° for cross cutting. Ergonomic benchtop table sawon-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control and provide overload protection. And the heavy-duty stand effectively prevents table from rollover during cutting.

And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling. Powerful cutting performanceequipped with high-power 15 amp motor in low noise, this table saw delivers 5, 000 RPM cutting performance to rip through various kind of hardwood with ease. 36 tooth blade & aluminum tabletopcoated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding.
BrandGoplus #ad
ManufacturerSuperbuy #ad
Weight46 Pounds

7. Rousseau

#ad

Rousseau 2780 Table Saw Stand for Smaller Portable Saws REPLACES: Rousseau Models 2745 and 2700-XL

#ad
Rousseau #ad - Micro adjust assembly for Quick & Accurate Saw Positioning. Increase rip capacity to 27”. Optional accessories include: model 2720 outfeed table, model 2780-EXT Extension Table, Model 2780-RXT Router Extension Table. Fits smaller portable saws: dewalt dwe 7480, dw745, Skil SPT70WT-22, bosch gtS1031, Makita 2703. Includes t-Style locking fence for accuracy. Adjustable Hairline Indicator.
BrandRousseau #ad
ManufacturerROUSSEAU CO. #ad
Height5 Inches
Length50 Inches
Weight57 Pounds
Width29 Inches
Part Number2780
Model2780
WarrantyLimited Lifetime

8. DEWALT

#ad

Mobile/Rolling DWE74911, DEWALT Table Saw Stand

#ad
DEWALT #ad - Durable steel construction. Easy setup and break down with excellent stability. Designed for easy loading and unloading into and out of vehicle.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height8.63 Inches
Length29.88 Inches
Weight0.5 Pounds
Width29.5 Inches
Part NumberDWE74911
ModelDWE74911
Warranty1 year limited warranty

9. WORX

#ad

WORX Pegasus Multi-Function Work Table and Sawhorse with Quick Clamps and Holding Pegs – WX051

#ad
WORX #ad - Perfect extra shelf or storage for your workspace. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer.

As a work table, supports 1, 000 lbs. Custom clamps two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. This table will be with you for the long haul. Worktable & sawhorse holds up to 300 lbs. Do it yourself. Light and sturdy it’s only 25 lbs. And its foldable design makes it easy to move and store.

As a sawhorse. And it’s easy to transition between the two. Do it with worx. Do it better. Connect multiple tables create a whole work counter when you link 3 or more Pegasus’ together. Built to last made out of a dependable, molded ABS with steel supports and fittings. Storage shelf on the bottom of the work pegasus we’ve made a place to hold a power strip or supplies.
BrandWORX #ad
ManufacturerWORX #ad
Height30.98 Inches
Length25 Inches
Weight29.76 Pounds
Width32.01 Inches
Part NumberWX051
ModelWX051
WarrantyComes with 3-year Manufacturer’s Warranty

10. Ridgid

#ad

RIDGID 10 in. Pro Jobsite Table Saw with Stand R4514

#ad
Ridgid #ad - Blade and Portable Stand. Heavy duty saw boasts 5000 rpm for diy or Professional Jobs Includes: Includes: 10 in.
BrandRidgid #ad
ManufacturerRidgid #ad
Part NumberR4514