Top 10 Miter Bar Stock – Miter Saw Accessories

As an Amazon Associate I earn from qualifying purchases.

1. POWERTEC

#ad

POWERTEC 71629 18-inch Miter Bar Replacement for POWERTEC Miter Gauges

#ad
POWERTEC #ad - Includes: 1 miter gauge Bar 4 Expansion Discs 2 Hex Wrenches. Compatibility: intended specifically for the POWERTEC 71142, 71143 and 71391 Miter Gauges.

Adjustable: using the original screw, the expansion discs can be adjusted with one of the provided hex key wrenches to provide you with the ideal fit. Function: an essential component to your miter gauge assembly, this miter bar provides you with a high quality OEM replacement designed with a lightweight, yet durable laser cut aluminum construction. Expansion discs: provide you with a perfect fit for most standard miter slots while removing all side play from the bar and prevents accidental lifting when feeding your stock.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height0.38 Inches
Length17.72 Inches
Width0.75 Inches
Part Number71629
Model71629

2. Peachtree Woodworking Supply

#ad

UHMW Precision Milled Bar 3/4" X 3/8" X 48" For Jigs, Fixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws, Router Table and Bandsaws 1 UHMW Bars

#ad
Peachtree Woodworking Supply #ad - Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, router table, band saw or router table. We all know how residue left on a table saw can be rather irritating and even harder to remove. Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.

Length of bar may vary slightly MADE IN THE USA! Even though its "slick", it does not leave behind any residue which means no clean up after use. Ideal for sleds where repetitive sliding happens regularly. Its also very slick in comparison to wood and other plastics. Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000, 000, 000 to 6, 000. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics.

This makes it ideal for sleds where repetitive sliding happens regularly. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove. Its also very slick in comparison to wood and other plastics.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodoworking Supply Inc. #ad
Weight0.01 Pounds
Part NumberPW1121

3. Fulton

#ad

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

#ad
Fulton #ad - When not in use the flip stop can be flipped up and out of the way. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.

The positive stops are perfect for many woodworking projects as they are the angles that are typically used. To adjust the head you simply loosen the post knob handle, solid aluminum head is machined with 13 positive stop holes. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.

This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting. 1 hole is at 90 degrees while the 6 holes on both sides are at 22. 5, 45, 30, adjustable, pull the spring loaded indexing pin outward, release the pin and lock into place. The head is mounted to a solid steel miter bar that measure 18” in length and is. 354” thick by. 730” wide. The.
BrandFulton #ad
ManufacturerFulton Woodworking Tools Inc. #ad
Part Number11567
Model11567

4. Peachtree Woodworking Supply

#ad

Router Table and Bandsaws 2 UHMW Bars, UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs, Fixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws

#ad
Peachtree Woodworking Supply #ad - Even though its "slick", it does NOT leave behind any residue which means no clean up after use. Length of bar may vary slightly. Made in the usa! Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table.

This makes it ideal for sleds where repetitive sliding happens regularly. Its also very slick in comparison to wood and other plastics. Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000 to 6, 000, 000, 000. Even though its "slick", it does not leave behind any residue which means no clean up after use. Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use.

Use this uhmw to make jigs and fixtures for your table saw, router table, etc. We all know how residue left on a table saw can be rather irritating and even harder to remove. We all know how residue left on a table saw can be rather irritating and even harder to remove. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Part Number1120
Model11520

5. NECALON

#ad

Miter Bar, 450mm /300mm Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool 300mm

#ad
NECALON #ad - Universal threaded mounting holes for convenient use. Made of high quality materials, it is of strong strength and long durability. For building various jigs on your table saw, like miter sleds etc. This is a miter bar usually used in table saw woodworking works. Adjustable stainless steel runner for perfect sliding action.
BrandNECALON #ad
ManufacturerNECALON #ad
Height0 inches
Length0 inches
Weight0.49 pounds
Width0 inches
Part NumberLazmind5ikbme9fc-02

6. Peachtree Woodworking Supply

#ad

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

#ad
Peachtree Woodworking Supply #ad - The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards when cut into smaller length pieces in place in a miter slot. The miter t-bar can also be mounted upside down by cutting a dado slot into your sled platform that is the same depth as the T on the Miter T-Bar. When mounting the miter t-bar it is a good idea to keep in mind that the “t” on the bottom of the track is approx.

1/8” tall, the tabs may catch and prevent the sled from sliding freely. To remedy this, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, we recommend using washers between the mounted track and the platform to allow the sled to slide as desired. The miter t-bar will then act much more like a standard solid miter bar. When we decided to start manufacturing aluminum tracks many years ago well over 20 years, we thought that it was very important to do our best to keep the manufacturing process here in the United States.

The t-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table. Using this type of flush mount may work better in certain situations when compared to the traditional method. When building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. We are proud to say that even after 20 years, we manufacture all of our anodized aluminum track including this Miter T Track here in the USA.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking #ad
Part NumberPW1034

7. MICRO JIG

#ad

ZEROPLAY Miter Bars by MICROJIG Double Pack

#ad
MICRO JIG #ad - Build table Saw Sleds Fast. Zeroplay miter bars will fit any standard 3/4” x 3/8” t-track miter slot That Measures Between 073" and 079" wide and at least 5/16" Deep. Top-down installation for easy And Fast Mounting To Jigs, Fixtures And Sleds. No slop, side-to-side Play Or Seasonal Warping.
BrandMICRO JIG #ad
ManufacturerMICROJIG, Inc. #ad
Height1 Inches
Length10 Inches
Weight0.26 Pounds
Width1 Inches
Part NumberZP9-B2S2
ModelZP9-B2S2
WarrantyExtended 3-Year Warranty from Authorized Resellers

8. Hatsbi

#ad

Hatsbi UHMW Crosscut Sled For Table Saw Sled Miter Bars 3/4" X 3/8" X 17" -Predrilled holes and 20 screws included For Jigs Fixtures or Miter Slots size 3/4"x3/8" 2 UHMW Bars

#ad
Hatsbi #ad - Does not absorb moisture and will not swell up over time due to exposure. Uhmw won’t expand or contract like wood does. The non-stick surface is easy to clean. Outstanding impact strength - even at low temperatures.

Predrilled holes - each bar has 5 exact size designed predrilled and countersunk holes for 20 specific sized screws included that ensures no expanding of the material when screws are inserted. Very slick and self lubricating – very high abrasion resistance. Uhmw bars won’t leave any residue, dust or shavings. Excellent sliding material - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary.

Jigs, fixtures or miter slots 3/4” x 3/8” – ideal for table saw, band saw or router table. Uhmw ultra high molecular weight Polymer plastic is 10 times heavier than regular high-density polyethylene for stability. Extremely durable – ideal for constant repetitive use.
BrandHatsbi #ad
ManufacturerLurentice Trading Ltd #ad
Part NumberQD2102001

9. POWERTEC

#ad

Aluminum grey, POWERTEC 71146 Aluminum Miter T-Bar, 48-Inch

#ad
POWERTEC #ad - Build: this aluminum t-bar extrusion possesses a thick, and is precision machined to accommodate a variety of woodworking applications, heavy duty exterior that won’t warp or alter in shape, ensuring long term durability.

Versatile: a perfect fit for all 3/4" x 3/8" t-slotted -miter slots and standard table saws with t- slotted  miter tracks, router table, drill press, Miter T-Track, for creating extension, and band-saw table applications. Also works with for powertec 71167, making this miter bar ideal for benchtop table-saw extensions, jigs and other woodworking requirements.

Function: ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play lifting for safer, high precision accuracy. Customizable: 48 inch profile can be custom cut to suit your individual project needs and specifications. Includes: 1 48" Miter T-Bar.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height0.5 Inches
Length48 Inches
Width1 Inches
Part Number71146
Model71146

10. Simlug

#ad

Miter Bar, Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool Durable in Use 0.374''Thickness11.81''

#ad
Simlug #ad - Table saw miter gauge - fixture jig is made of high quality materials, it is of strong strength and long durability. Miter bars for table Saw - Adjustable stainless steel runner for perfect sliding action. Miter gauge - Universal threaded mounting holes for convenient use. Miter slot runners - for building various jigs on your table saw, like miter sleds etc. Miter bar - this is a miter bar usually used in table saw woodworking works.
BrandSimlug #ad
ManufacturerSimlug #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberSimlugc5t2o730b8-02