Top 10 JawHorse Portable Clamping Work Support Station – Power Tool Stands

As an Amazon Associate I earn from qualifying purchases.

1. Rockwell


Rockwell JawHorse Portable Material Support Station – RK9003, Black and green

Rockwell #ad - Tripod base three perfectly positioned legs actually provide more support on uneven ground than four legs would. Quickly folds down with no tools. Can hold a standard 36” door with up to 37” of clamping range and a 3/8” per step clamping method.

No mar pads made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects. Weighs 43 lbs. Tripod base for stability. Easy to move easy to store. Jaws extend a full 37-Inch. Hands-free clamping and foot-pedal operated for up to 1-ton clamping force. 1 ton of clamping force 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot.

With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push. All steel construction built to last and built to hold your most important projects while your hands stay free to use your tools.
BrandRockwell #ad
ManufacturerPositec USA #ad
Height15.4 Inches
Length33.1 Inches
Weight46.1 Pounds
Width15 Inches
Part NumberRK9003
Warranty2 Year Positec



1-Ton Clamping Force Portable Material Support Station 440 LB

WINTOOLS #ad - Hands-free clamping and foot-pedal operated for up to 1-ton clamping force. Solid steel construction provides rigidity and strength, supporting up to a 440-lb.

One metric ton of clamping force holds your projects up and off the ground to a more comfortable working height and allows you to work more safely. Foot pedal lever creates a hands-free work station, folds and rolls for portability and storage. Load. Replace your workbench, sawhorse, clamps, lock it, bench vice and more - just set it, and clamp your way to hands free support for your projects. Jaws extend a full 37-Inch. Simply clamp an ordinary piece of plywood into the JawHorse and you have a perfect workbench.
ManufacturerWINTOOLS #ad



BLACK+DECKER Workmate Portable Workbench, 350-Pound Capacity WM125

BLACK+DECKER #ad - Parallel clamping: 4-5/8". Adjustable swivel pegs easily clamp irregular shapes. Compact, lightweight design folds flat for easy storage. Slip-resistant feet help prevent sliding. The portable work bench has a durable steel frame and wooden vise jaws. Jaws resist warping and can be angled to accommodate uniquely-shaped materials. Sturdy construction of the garage work bench holds up to 350 lbs.
ManufacturerBlack & Decker #ad
Height5 Inches
Length33 Inches
Weight14.85 Pounds
Width5 Inches
Part NumberWM125
Warranty2 Year Warranty

4. Rockwell


Rockwell RK9034 JawStand XP Work Support Stand

Rockwell #ad - Low friction surface when you’re ready to release the project just unclamp it and it will slide out smoothly. Swiveling & tilting head clamps goes from 0-90° so you can place the project in the exact orientation you like it while working on it.

Rubber grip surfaces holds the project securely in place without marking up or damaging the material. Micro height adjustment knob allows you to place the project precisely where it needs to be so you can fasten it to the wall. Bubble level built right in for easy leveling so when you’re installing a hanging bookshelf you’ll know when it’s just right. Tripod base with no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load.
BrandRockwell #ad
ManufacturerPositec USA #ad
Height33.1 Inches
Length14 Inches
Weight0.96 Pounds
Width8 Inches
Part NumberRK9034



WORX WX051 Pegasus Folding Work Table & Sawhorse

WORX #ad - Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer. Connect multiple tables create a whole work counter when you link 3 or more Pegasus’ together. Worktable & sawhorse holds up to 300 lbs. Worx tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.

Do it with worx. As a sawhorse. Do it better. Perfect extra shelf or storage for your workspace. This table will be with you for the long haul. Built to last made out of a dependable, molded ABS with steel supports and fittings. As a work table, supports 1, 000 lbs. Storage shelf on the bottom of the work pegasus we’ve made a place to hold a power strip or supplies.

And it’s easy to transition between the two. Light and sturdy it’s only 25 lbs. And its foldable design makes it easy to move and store. Custom clamps two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs.
BrandWORX #ad
ManufacturerWORX #ad
Height6.3 Inches
Length27.17 Inches
Weight28 Pounds
Width37.04 Inches
Part NumberWX051
WarrantyComes with 3-year Manufacturer’s Warranty

6. Laserjamb


FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5

Laserjamb #ad - Textured rubber Pads For Gripping. Fully Articulated Ends. Quick Release Lever. Reaches 5-to 12-feet; Action Lever For Secure Pressure.
BrandLaserjamb #ad
ManufacturerLaserjamb #ad
Height5 Inches
Length59 Inches
Weight16.5 Pounds
Width5 Inches
Part Number3-H 2PK 3RD HAND 5'
WarrantyGuaranteed against defects in materials and workmanship

7. Milescraft


Multi-Angle Drill Guide Attachment, Self-Centering Drill Guide Base, Compatible with most 3/8 in. Drill Accessories, Milescraft 1318 DrillMate Portable Drill Guide, Multi-Angle Readouts

Milescraft #ad - Adjustable depth stop and spring action control of the head. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2 Inches
Length16.63 Inches
Weight4 Pounds
Width7.13 Inches
Part Number1318



250 pound Load Capacity W137006A, WORKPRO Folding Roller Stand Height Adjustable

WORKPRO #ad - Portable, light-weight Design Folds For Convenient Storage. Adjustable height From 27-In To 43-In. Highly visible edge Guides Keep Work In Place. Eccentric foot keeps Stand Stabilized On Uneven Surfaces.
BrandWORKPRO #ad
ManufacturerWORKPRO #ad
Height30.7 Inches
Length17.5 Inches
Width3 Inches
Part NumberW137006A

9. Bora


Bora Centipede 2x4 Feet Work Stand and Portable Table | Sawhorse Support with Folding, Collapsible Steel Legs, CK6S

Bora #ad - Complete kit- the full set comes with the following accessories: 2 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag. Quick set up – this stand is ready to use right out of the box, no Assembly required.

Depending on the size of your centipede workstand, you may need more than one Tabletop for full coverage. Saw-horse solution - made of heavy duty steel construction, The centipede is a fold-able work stand that can be set up as a large portable workbench at any job site. When the job is done, it conveniently folds up for easy storage and transport. The larger the base, ck6s, CK9S, the more weight the table can hold. Versatile functionality - choose from 4 sizes, ck12s and ck15s.

The wider sizes allow you to complete 2 jobs at once. Ck22t table top - now available for a portable work top option with 3/4-inch bench dog holes. It’s expandable by simply adding risers not included to increase the working height and it supports up to 2, 500 pounds of power tools and machinery. Perfect working height - the working height is 30 inches tall: large enough to lay a 4ft x 8ft wood board on top. It takes just seconds to set up. Ck6s needs 1, ck9s needs 2, CK15S needs 4.
BrandBora #ad
ManufacturerHTC #ad
Height38 Inches
Length6 Inches
Weight12.5 Pounds
Width9 Inches
Part NumberCK6S
Warrantyone year



3rd Hand Support System, 2 Pack, SAND MINE Adjustable Support Pole, Steel Quick Support Rod, Upper Hand Work Support for Cabinet Jacks Cargo Bars Drywall Support

SAND MINE #ad - Multiple usage: this quick support pole provide support for reinforce stairs, drywall, weak floors or decks, crown moldings, is great for installing upper cabinets, porches, light fixtures and soon.

Durable: this adjustable support pole is made of heavy-duty ABS plastic and high-density metal with blue oxide finish for optimal durability. Adjustable: this 3rd hand support system can adjust height from 63 inch to 114 inch, includes 130 levels for easy height adjustment to meet various purposes. Free your hands: this extension pole secures building materials to keep your hands free, it offers you a 3rd hand when you were working alone. Load capacity of this quick support rod: 154 lb 70 kg each. Non-slip pads can meet various working conditions.
BrandSAND MINE #ad
ManufacturerSAND MINE #ad
Part NumberZCG02
Warrantymanufacturer warranty for 90 days from date of purchase