Uncategorized

Top 10 Induction Heater Kit – Heaters & Heater Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Induction Innovations

#ad

Induction Innovations MD-700 Mini-Ductor II Magnetic Induction Heater Kit

#ad
Induction Innovations #ad - Works with all the mini-ductor coils and attachments. Releases thread lock compounded nuts, frozen manifold bolts, bearings and more. Also great for hail dent removal. Operates on standard 110v/10 amp circuit. Completely hand-held, ergonomic, grenade style grip and a bright LED to illuminate work area. Led at terminal end provides for work area illumination. Grenade grip for better handling. The mini-ductor ii md700 1, 000w hand held induction power inverter.
BrandInduction Innovations #ad
ManufacturerInduction Innovations #ad
Height17 Inches
Length10 Inches
Weight5.2 Pounds
Width5 Inches
Part NumberICT-MD-700
ModelICT-MD-700
Warranty1 YEAR WARRANTY ON MATERIAL AND WORKMANSHIP

2. WOYO

#ad

Induction Heating Bolt Remover Tool, Handheld Bolt Buster Gun, Induction Bolt Heater Tool Kit

#ad
WOYO #ad - Stop breaking good tools trying to break free bolts. Great thing to have an induction bolt heater in your tool box, takes all the fight out of the job.

Easy to use just plug in and use the tool on stubborn rusted bolts until they get cherry red hot. Great tool for many situations, there are always rusted nuts and bolts on older machinery, equipment you are trying to repair. Purchase guarantee please contact us to return or refund within 30 days if the products get any defects or damages when you receive it, or the goods is damaged or unusable due to quality problems during use. Safer and cleaner by replacing torches, it greatly reduces the risk of accidents and potential damage.
BrandWOYO #ad
ManufacturerWOYO #ad
ModelHBR110

3. Mophorn

#ad

Mophorn Magnetic Induction Heater 110V 1000W Magnetic Induction Heater Kit Hand-held Induction Innovation

#ad
Mophorn #ad - Indication led light- led light is installed at terminal position end provides for work area illumination even when you work in the dark. Flameless heat- the induction bolt heater has a great performance, it adopts high frequency magnetic fields to heat up metal ONLY with induction heat.

Portable case- it comes with a carrying case for the whole complete Induction Heater kit and easier storage and carrying. Wide application- suit for loosen seized hardware, gears, pulleys, PDR applications paint-less dent repair, bearings, lug nuts, in-line applications, fuel tank straps, etc. Ergonomic grip- it has air vent at the other end of the mini ductor, opposite the LED light. Ergonomic grip is for better handling.
BrandMophorn #ad
ManufacturerMophorn #ad

4. Bewinner

#ad

Bewinner 2000W High Voltage Induction Heater Module Flyback Driver Heating BoardUS Plug 100-240V

#ad
Bewinner #ad - High voltage induction heater kitthis is a complete kit with various accessories:Induction Heating Board+Spiral Copper Pipe+Water Pipe+Mini Water Pump+Adapter+Screw Package+Telescopic Belt. Precautionsonly iron can be heated directly, the need to seal to prevent water leakage.

Please installed the copper coil and water pump, other metal materials need graphite crucible. Copper pipe and water pipe connections, then connect the power supply. Can not Empty Load. Your satisfaction is our main concern. Multiple security protectiontemperature protection: heatsink temperature higher than 65 °C, enter protection. Power tube broken/short circuit, enter protection.

Undervoltage protection: Input voltage is less than 20V, display MOS-XX. Detailed specificationcopper tube coil 50mm, input current is greater than 40A, Input voltage DC 24V-70V, voltage greater than 55V, Max Power-2000W, enter protection.100% satisfaction guaranteeif you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution.
BrandBewinner #ad
ManufacturerBewinner #ad
Height3.54 Inches
Length7.99 Inches
Width3.98 Inches
Part NumberBewinnerenhvapfiwo

5. Solary

#ad

Solary Magnetic Induction Heater Kit 1000W 110V For Automotive Flameless Heat Induction Heat Hand Tool 1KW

#ad
Solary #ad - Will heat through rubber or plastic. Equipped with fan cooling and thermal protection. Will not damage nearby heat sensitive parts. Improved ergonomics with a granular slip resistant handle, and work area with high illumination LED.

Covered terminals for superior safety protection. Reinforced heat stabilized thermoplastic housing provides for increased durability inside and out. By using the eletromagnetic fields to heat the ferrous and non ferrous metals, no open flame cause by the heating, which is faster and more precise and efficient than oxy-acetylene system, induction heater can turn a 3/4 nut cherry red in 15 seconds, to ensure your working environment in safe.
BrandSolary #ad
ManufacturerSolary electric equipment Co., Ltd. #ad
Height3.5 Inches
Length15 Inches
Width3.5 Inches

6. H-COME

#ad

1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan

#ad
H-COME #ad - It can work continuously under the condition of good heat dissipation. Moderate power which make it can be used to quenching, maximum current is 40A, annealing and other heat treatment. The induction heating circuit adopt 12-48v dc power supply, the power uo to 1800w. Also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast.

The induction heating boards maximum power is 1800w, adopted super PCB layout design and super heat sink, generator voltage inverter, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, etc. Please check the power output meets the requirements if the MOS tube fever, and be sure to do a good job of cooling. Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out. It is recommended that not exceed 48v 35a to prevent accidents and damage, and 12V power might lead to the voltage decreases, 12V power supply is too small almost without response, the greater the voltage/current, the greater the heating power, which is very dangerous.

More than 24v/20a power supply, Although withstand more than 40A current. Induction heating is recommended to use 36V 20A power supply, heating faster. Please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use not included.
BrandH-COME #ad
ManufacturerH-come Tech #ad

7. Bolt Buster

#ad

Bolt Buster BB2-ACC Orange/Black Handheld Heat Induction Tool

#ad
Bolt Buster #ad - 00 Improved design delivers trUE 1000 Watts of Induction - More Efficient. 1 year. Comes with advanced Coil Kit Valued at 150 Thinner lighter cylindrical Housing More Ideal Hard to Reach Spots.
BrandBolt Buster #ad
ManufacturerBolt Buster #ad
Height2 Inches
Length15 Inches
Weight4 Pounds
Width2 Inches
Part NumberBB2-ACC
ModelBB2-ACC
Warranty1 year Limited

8. TaiShi

#ad

220V 15KW 30-100 KHz High Frequency Induction Heater Furnace 2200 ℃ 3992 ℉

#ad
TaiShi #ad - Adopts the latest mospet, igbt power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power. With 100% load design, can work in 24 hours without stop. Select power supply according to the power and frequency.

The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy. With constant current and constant power control function to greatly optimize the heating process of metals, realize efficient and fast heating, and fully exert the superiority of the products;Power consumption is half of traditional electron tube high frequency induction heating equipments under same conditions. With heating-insulating-cooling three stages function setting, the heating and insulating time required can be get to accommodate to the batched and repeated heating situations; With multiple status display of overflow, overvoltage, low water, phase failure and load malfunction, providing higher reliability and sustainability.

Infrared temperature detector can be equipped to realize the automatic control of temperature, improve heating quality and simplify manual operation.
BrandTaiShi #ad
ManufacturerTaiShi #ad
Height18.5 Inches
Length21.65 Inches
Width8.66 Inches
ModelHT-15A

9. Solary

#ad

Solary Magnetic Induction Heater Kit 1000W 110V For Automotive Flameless Heat Induction Heat 1KW Hand Tool

#ad
Solary #ad - Will heat through rubber or plastic. Equipped with fan cooling and thermal protection. Will not damage nearby heat sensitive parts. Reinforced heat stabilized thermoplastic housing provides for increased durability inside and out.

By using the eletromagnetic fields to heat the ferrous and non ferrous metals, induction heater can turn a 3/4 nut cherry red in 15 seconds, no open flame cause by the heating, which is faster and more precise and efficient than oxy-acetylene system, to ensure your working environment in safe. Improved ergonomics with a granular slip resistant handle, and work area with high illumination LED. Covered terminals for superior safety protection.
BrandSolary #ad
ManufacturerSolary electric equipment Co., Ltd. #ad
Height3.5 Inches
Length15 Inches
Width3.5 Inches

10. ICZW

#ad

ICZW Mini Induction Heater Inductor Coil Kits Magnetic Induction Heater Kit Flameless Heat Accessories 8pcs

#ad
ICZW #ad - Includes plastic storage case. 2 x coils 30mm/40mm/50mm dia; two 750mm 29. 5” spare free forming coil ; perfect winding, suitable for heating various bearings. Safely removing rusty bolts and nuts, as accessories for 1000W handheld high frequency flameless. Easily wrap around rusty bolts, nuts, pulleys, gears, larger bearings, etc;. Heating bolt diameter scope: Φ5~40mm.
BrandICZW #ad
ManufacturerICZW #ad