Uncategorized

Top 10 Flushing Router Bit – Trim Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. YAKAMOZ

 #ad

Yakamoz 2Pcs 1/4'' Shank Top and Bottom Bearing Guide Flush Trim Pattern Router Bit Set Woodworking Cutter Tool with 10 Pcs Top Mounted Replacement Bearings

#ad
YAKAMOZ #ad - Shank diameter: 1/4 inch/ 6. 35mm, cutting diameter: 1/2 inch/ 12. 7mm, blade height: 1-1/2 inch/ 38mm, Replacement Bearings Diameter: 1/2 Inch/ 12.

7mm. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Carbide tipped micro grain grade blades provide better strenght and improve working efficiency and product quality. Great performance on a wide range of materials including solid wood, plywood, chipboard, MDF, etc. Come with 10pcs top mounted replacement bearings for for long service life and save your money.
BrandYAKAMOZ #ad
ManufacturerYakamoz #ad

2. Wolfride

 #ad

Wolfride 4PCS Flush Trim Router Bit Set 1/4 Inch Shank Top Bearing Flush Trim Router Bit

#ad
Wolfride #ad - Note: 3/4 of the shank must be inserted and securely tightened so that we can use the clamping force. Precision ground, creating smooth cutting surface. 1/4" shank top bearing flush trim router bit, 5/16", 3/8", cutting diameter: 1/4", 1/2". Industrial grade Carbide Cutters, good quality for long service life. Can be used for finishing solid wood, chipboard, MDF, plywood, etc.
BrandWolfride #ad
ManufacturerWolfride #ad

3. Walfront

 #ad

Flute Straight Flush Trim Pattern Router Bit Cutter Top Bearing Woodworking with 1/2-Inch X 2-Inch Length 1/4-Inch Shank

#ad
Walfront #ad - Solid hardened Steel Bodies with Anti-Kickback Design. Applicable models: fit for bakelite milling / computer engraving machine / trimmer / engraving and milling machine / vertical edger/ CNC / engraving machine / other automatic routers as well as hand-held/ table-mounted portable routers.

Made of carbide alloy, smooth rotation, good wear resistance, quick operation, high hardness, sharp cutting, significantly improve the service life.1100% new Brand. Build-up & heat Resistant Teflon Coating. Suitable for:composite materials, Solid wood, Hard wood, Particle wood, Plywoods, Density board and other wood material.
BrandWalfront #ad
ManufacturerWalfront #ad
Height1.97 Inches
Length3.54 Inches
Width1.97 Inches
Part NumberWalfrontcbkm79no0p

4. Meihejia

 #ad

Meihejia 1/4 Inch Shank Pattern Flush Trim Router Bit Set 4 Sizes

#ad
Meihejia #ad - Blade length 10mm, 38mm. Such as diy project, lettering, and other template work, grooving, . C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. 1/4 inch shank flush trim router bit set, 25mm, 20mm, 1/2 inch in blade dia. Heat resistant Teflon coating. Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines. Create very smooth cuts. Useful for trimming, etc. Suitable for solid wood, plywood, MDF, particleboard, etc.
BrandMeihejia #ad
ManufacturerMeihejia #ad
Part NumberF-1232,0

5. SpeTool

 #ad

SpeTool 5Pcs Carbide Compression Router Bit Up&Down End Mills 1/8 inch Shank with 1/8 inch Cutter for CNC Mill Machine Wookwork 3D Profile Detail Engraver Carving

#ad
SpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Plunge cut leave with clean edge and top surface, Mortises, Cycles and dados, better than straight bits. The route bit suit for cnC router or any brand plunge router with 1/8” collet. Industrial quality control to ensure best performance. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Up&down solid carbide spiral router bit with 1/8inch shank and 1/8inch cutting diameter, 3/4 inch cutting length, 1-1/2 inch total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/8-1/8-U&D

6. Meihejia

 #ad

Meihejia 1/4 Inch Shank Template Pattern Flush Trim Router Bit Set 4 Sizes

#ad
Meihejia #ad - Variety of sizes to cut through different thicknesses and depths of materials. C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Create very smooth cuts. 1/4 inch shank top bearing flush trim router bit set, cutting diameter 1/4", 3/8", 5/16", 1/2". Heat resistant Teflon coating. Suitable for solid wood, plywood, laminate, MDF, etc. Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines.
BrandMeihejia #ad
ManufacturerMeihejia #ad

7. infinity Tools

 #ad

Mega Flush Trim Router Bit

#ad
infinity Tools #ad - Extended life, even in abrasive man-made materials. Ultra-smooth finish on top and bottom of workpiece. 1/2" shank, 2" cutter height, 3/4" diameter, 4-1/2" OAL. Micrograin Carbide Cutting Edges.
Brandinfinity Tools #ad
ManufacturerInfinity Tools #ad

8. YAKAMOZ

 #ad

Yakamoz 4pcs 1/4 Inch Shank Top End Bearing Flush Trim Router Bit Set, 1/4" 5/16" 3/8" 1/2" Cutting Diameter

#ad
YAKAMOZ #ad - Ideal router bit for fast smooth and accurate trimming cuts for laminates and template work. Build-up & heat resistant teflon coating can effectively prevent breakage or bending under high-speed working condition. Industrial grade router bits: Premium C3 Micro-grain Carbide Cutters for long-lasting performance. Use on cnc and other automatic routers as well as hand held and table mounted portable routers. Cutting height: 13/16", 1-1/16", cutting diameter: 1/4", 5/16", 3/8", 1/2" with an top end bearing, 1-3/16", 1-7/32", Shank Diameter: 1/4".
BrandYAKAMOZ #ad
ManufacturerYakamoz #ad

9. Freud

 #ad

Freud 42-100 3/8" Dia 2-Flute Flush Trimming Router Bit w/1/4" Shank

#ad
Freud #ad - The product is manufactured in china. Easy and simple use kit. The product is 3/8 inch 2 flute flush bit. Ground carbide with titanium for long life, Imported. 3/8-inch diameter, 1-inch height, 1/4-inch shank.
BrandFreud #ad
ManufacturerFreud #ad
Height1.7 Inches
Length4.8 Inches
Weight0.13 Pounds
Width1.7 Inches
Part Number42-100
Model42-100

10. Freud

 #ad

Freud 1/2" Dia. Bearing Flush Trim Bit with 1/4" Shank 42-104

#ad
Freud #ad - Use on portable or table-mounted routers. 1/2", 1/4" shank. D 1/2", carbide height h 1", 2 flutes, Bearing Dia. Cuts all composition materials, plywoods, hardwoods, and softwoods. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.1 Pounds
Width1 Inches
Part Number42-104
Model42-104
TAGS: ,,,,,,