As an Amazon Associate I earn from qualifying purchases.
BAIRONG #ad - Purpose: it can be used for any standard lamp, table lamp, floor lamp, standing lamp, etc. Package includes: 2 x black ball head lamp holder.
MARRTEUM #ad - The finial is designed as a traditional knob, and looks classical, simple and modern. Easy installation: just remove the old finial by turning anticlockwisely, then positioning the new lamp finial over the threaded stud and fasten it by turning clockwisely.
Canomo #ad - Size: 1-3/8 inches in height; please note that this is a small size, please confirm the finials suitable for your lampshade before purchasing. Dual-thread design fits both 1/8 IP 3/8" or 1/4-27 standard harp thread.
Canomo #ad - Dual-thread design fits both 1/8 IP 3/8" or 1/4-27 standard harp thread. Easy to install, Screws onto the lamp harp after installing the lamp shade. Black finish complements most retro decors.
RddenIy #ad - Easy installation: this lamp harp is detachable and easy to be installed. Widely applied: Good for modern lighting fixtures and contemporary home decor styling.
9. 5 inch 24. 2cm tall, internal diameter 1-7/16 inch 3. 6cm, tall:10inch=Harp 9. 5inch+05inch Adapter. Dedicated to e26 lamp holder converter detachable lamp harp, total tall is 10inch+2inch, Bulb Socket equipped with harp, The Bulb Socket tall 2 inches, so use for lampshade tall exceeding 10inch.
Juhezz #ad - They are heavy-duty able to support the weight of the heavy lampshade. Installation：the lamp finial easily screws on and off, the saddle can be removed if wishing to keep your existing saddle. Lamp shade holder and finial: perfect for lamp accessories, can be used for table lamp, desk lamp, floor lamp, standing lamp, etc.
Lamp harp package includes : all 6 pieces, 2 piece saddle, 2 pieces 8-inch lamp shade harp, and 2 piece lamp finial.
Dimensions: the height of the bracket is 8 inches from the top to the bottom, the width of the harp4inch the bottom saddle is a 10mm round hole, and the lamp finial is 28mm in diameter. Suitable for a lampshade 9 inches - 10 inches tall, Select a harp that's 1-2 inches shorter than the height of your lampshade to guarantee you a great fit.
Canomo #ad - Size: finial is 1-3/8 inches in height, threaded 1/4-27 to fit lamp harp tops. Package includes 8 packs lamp finials. Simple modern Design looks great and will not go out of style.
Hyamass #ad - Package content: 2 Pcs x Lamp Shade Finial. 1-2/3 inch tall; Works for standard light fixture. Easy screw in installation, no tools needed, add a decorative accent to your lamp.
OZXNO #ad - Size:1-1/2 inch high, thread1/8 ip（3/8“）or1 / 4-28. Material: high quality brass, rust and corrosion resistance, Surface plating, long service life.
OZXNO #ad - Threads: standard 1/4-27. Classic black, polished to prevent discoloration/falling, solid and strong. Easy to install: hat shape design is very convient to use and can be installed easily with bare hands.
1. BAIRONG
#ad2pcs 1-1/2 Inch Lamp Finial Oil Rubbed Black Steel Ball Knob Lamp Shade Finials Cap Knob Lamp Decoration for Lamp Harp Holder
#adMore information #ad
Color: black; length: 1-1/2"; Thread: 1/4-27. Using high-quality iron material, the surface is rust-proof, strong and durable. Easy installation: convenient screw installation and disassembly.| Brand | BAIRONG #ad |
| Manufacturer | BAIRONG #ad |
| Part Number | ORBSBKLSF1-12-2 |
| Model | ORBSBKLSF1-12-2 |
More information #ad
2. MARRTEUM
#adMARRTEUM 1/2 Inch Tall Lamp Finial Tapped 1/4-27 Knob Lamp Accessories for Lamp Shade Holder Harp Tops, 2PCS, Black
#adMore information #ad
You will get 2 pcs black lamp finials. The finial is the perfect accessory for lamp shade Holder Harp Tops, table lamps, which is compatible with most different lamps, floor lamps, such as wall lamps, pendant lamps and so on. Size: 1/2 inch tall, Thread: 1/4-27.| Brand | MARRTEUM #ad |
| Manufacturer | MARRTEUM #ad |
| Part Number | LAMPFINIALS-BK-2P |
| Model | MA-LF |
More information #ad
3. Canomo
#adCanomo 2 Packs Lamp Finial Cap Knob Lamp Decoration for Lamp Shade, Black, 1-3/8 Inches Small Size
#adMore information #ad
Lamp finials add a decorative flair to the top of a lamp, while holding a lampshade in place. Black finish complements most retro decors. Easy to install, Screws onto the lamp harp after installing the lamp shade.| Brand | Canomo #ad |
| Manufacturer | Canomo #ad |
More information #ad
4. Canomo
#adCanomo Solid Nut Shaped Lamp Finials Lamp Finial Cap Knob Lamp Decoration for Floor or Table Lamp Shade Black
#adMore information #ad
Size: 1-3/8 inches in height; please note that this is a small size, please confirm the finials suitable for your lampshade before purchasing. Lamp finials add a decorative flair to the top of a lamp, while holding a lampshade in place.| Brand | Canomo #ad |
| Manufacturer | Canomo #ad |
| Model | finial -nut-B |
More information #ad
5. RddenIy
#ad10" Lamp Shade Harp Holder and E26 Light Base UNO Fitter Adapter Converter Finial Set,for Table and Floor Lamps
#ad9. 5 inch 24. 2cm tall, internal diameter 1-7/16 inch 3. 6cm, tall:10inch=Harp 9. 5inch+05inch Adapter. Dedicated to e26 lamp holder converter detachable lamp harp, total tall is 10inch+2inch, Bulb Socket equipped with harp, The Bulb Socket tall 2 inches, so use for lampshade tall exceeding 10inch.
More information #ad
Note:please make sure your lamp bulb base is E26 with Collar Ring such as pictures, Dedicated to E26 lamp holder converter detachable lamp Harp.| Brand | RddenIy #ad |
| Manufacturer | Reachno #ad |
More information #ad
6. Juhezz
#adJuhezz 2 Set Lamp Harp Fitter 8 inch Heavy Duty Lamp Shade Holder with Detachable Base and Ball Lamp Finial for Table and Floor Lamp,Black
#adLamp harp package includes : all 6 pieces, 2 piece saddle, 2 pieces 8-inch lamp shade harp, and 2 piece lamp finial.
More information #ad
Black lamp harp protective coating：the lamp harp holder is made of metal with a black polished surface which is a kind of protective coating to prevent the lamp harp from getting rust. Dimensions: the height of the bracket is 8 inches from the top to the bottom, the width of the harp4inch the bottom saddle is a 10mm round hole, and the lamp finial is 28mm in diameter. Suitable for a lampshade 9 inches - 10 inches tall, Select a harp that's 1-2 inches shorter than the height of your lampshade to guarantee you a great fit.
| Brand | Juhezz #ad |
| Manufacturer | Juhezz #ad |
| Model | J0007 |
More information #ad
7. Canomo
#adBlack, 1/2 Inch Tall, Canomo Pack of 8 Solid Metal Lamp Finials Caps tapped 1/4-27 for Lamp Shade Holder Harp
#adMore information #ad
Holds the lampshade in place on the harp and fits Harps with Standard 1/4-27 Threads. Finished in a black color and polished to prevent tarnishing, and looks classical. Easy to install, simply screw onto the lamp harp top after installing lampshade.| Brand | Canomo #ad |
| Manufacturer | Canomo #ad |
| Model | black |
More information #ad
8. Hyamass
#adHyamass 2Pcs Clear Crystal Pumpkin Ball Shaped Lamp Finial 1-2/3 Inch Lamp Shade Finial Decoration Accessories with Polished Brass BaseBlack）
#adMore information #ad
Lamp finials fits 1/4-27 standard harp thread. 6. 35mm. Lamp finials add a decorative flair to the top of a lamp, while holding a lampshade in place.| Brand | Hyamass #ad |
| Manufacturer | Hyamass #ad |
| Model | HY211207234698136 |
More information #ad
9. OZXNO
#adOZXNO 1pcs Solid Lamp Finial Brass Lamp Finial Cap Knob Lamp Decoration for Lamp Shade/Tiffany Style LampBlack
#adMore information #ad
Easy installation: no tools needed, add a decorative accent to your lamp. Package include: 1pcs brass lamp finial. Wide range of uses: used for standard lamp harps such as desk lamps/tiffany style lamp and floor lamps.| Brand | OZXNO #ad |
| Manufacturer | OZXNO #ad |
| Part Number | BUDDHA-LAMP-FINIAL-BLACK-1 |
| Model | Black |
More information #ad
10. OZXNO
#adOZXNO 2-pcs 1/4-27 Solid Lamp Finials Caps Tapped of Tops for Lamp Shade Holder Harp DecorationBlack
#adMore information #ad
Material: made of high-quality iron, electroplating process, durable. Package includes:2-pcs solid lamp finials caps.| Brand | OZXNO #ad |
| Manufacturer | OZXNO #ad |
| Part Number | SOLID-LAMP-CAPS-BLACK-2P |
| Model | B-1 |
More information #ad
