Uncategorized

Top 10 Festoon Miter Saw – Power Miter Saws

As an Amazon Associate I earn from qualifying purchases.

1. DEWALT

#ad

DEWALT Sliding Compound Miter Saw, 12-Inch DWS779

#ad
DEWALT #ad - Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops. Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings for accuracy and durability.

Tall sliding fences support 6-3/4-inch base vertically. Efficient dust collection system captures over 75% of dust generated. 2-inch x 14-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 10-inch dimensional lumber at 45 degree. Bevels 0 degree - 48degree left and right. Oversized, high visibility bevel scale with positive stops. Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw. The mitre saw has a precise miter system and machined base fence support.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height17 Inches
Length21 Inches
Weight56 Pounds
Width17 Inches
Part NumberDWS779
ModelDWS779
Warranty3 year limited warranty

2. BOSCH

#ad

15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade , Blue, BOSCH Power Tools GCM12SD

#ad
BOSCH #ad - Precision: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support. Axial glide system: the patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut.

Adjustable: the gcm12sd miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33. 9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum.

Ease of use: upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw. Capacity: expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight0.2 Pounds
Width0 Inches
Part NumberGCM12SD
ModelGCM12SD
WarrantyLimited 1 Year

3. Festool

#ad

Festool TS 55 REQ-F Plus FS w/55" Rail 576012

#ad
Festool #ad - Utilize the rail and saw with or without a table or work surface. The festool ts 55 is not your standard circular saw. Breaking down sheet goods? cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment.

The saw rides on a guide rail, splinter free, or track, miter saws and panel saws. The ts 55 track saw delivers precise, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, glue ready cuts and only takes seconds to setup. The ts 55 track saw works seamlessly with it's integrated rail, available in various sizes. The track saws flat housing allows for flush cutting.
BrandFestool #ad
ManufacturerFestool #ad
Height13 Inches
Length60 Inches
Weight24.2 Pounds
Width17 Inches

4. Metabo HPT

#ad

10" 24T TCT Miter Saw Blade C10FCGS, Metabo HPT 10-Inch Compound Miter Saw, Large Table, 0-52° Miter Angle Range, Single Bevel, 0-45° Bevel Range, 15-Amp Motor

#ad
Metabo HPT #ad - Thumb actuated positive stops: For quick miter adjustments. Bevel range: 0-45 degrees, to the left with adjustable bevel stops for precision cuts.

Large table: offers better material support with vice clamping system to secure work piece. Miter angle range: 0-52 degrees, to the right and left for increased flexibility. To facilitate maneuverability and portability. Warranty: covered by metabo HPT's Professional 5-Year Tool Warranty. 10" compound Miter Saw. Horizontal handle: For a secure hold. Motor: 15 amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5, 000 RPM. Lightweight: only 24. 2 lbs.
BrandMetabo HPT #ad
ManufacturerKoki Holdings America, Ltd #ad
Weight24.5 Pounds
Part NumberC10FCGSM
ModelC10FCGS
Warranty5 Year

5. Makita

#ad

Makita LS0815F Slide Compound Miter Saw

#ad
Makita #ad - Compact and lightweight Design for Job Site Portability. For job site portability. Cuts up to 12" at 90degrees and 8-1/2" at 45Degrees. Miters 0-50 degrees left & 0-60 degrees right, with positive stops at 0, 31. 6, 15, 22. 5, 45 and 50 degrees left and right plus 60 Degrees right. Powerful 105 amp direct drive motor requires less maintenance and delivers 5, 000 RPM. Compact and lightweight 31. 1 lbs.
BrandMakita #ad
ManufacturerMakita #ad
Height20 Inches
Length30 Inches
Weight31.1 Pounds
Width18 Inches
Part NumberLS0815F
ModelLS0815F

6. Skil

#ad

Skil 10" Dual Bevel Sliding Miter Saw, MS6305-00

#ad
Skil #ad - Powerful 15 amp motor - delivers 4, 800 RPM for quick, detailed cuts. Led shadow line - Provides high precision cuts with greater accuracy than lasers. Dual bevel – perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right. 2x12 cutting capacity – cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees. Cuts at common angles - cuts up to 50 degrees left and right with 11 positive stops at most used angles.
BrandSkil #ad
ManufacturerSKIL #ad
Height14.17 Inches
Length22.44 Inches
Weight39.4 Pounds
Width35.43 Inches
Part NumberMS6305-00
ModelMS6305-00
Warranty3 Year limited warranty

7. DEWALT

#ad

Tool Only, Cordless DCS361B, DEWALT 20V MAX 7-1/4-Inch Miter Saw

#ad
DEWALT #ad - Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy for DEWALT miter saw.

Allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Integrated cut line cross-cut positioning system of DEWALT 20V miter saw provides adjustment-free cut line indication for better accuracy and visibility. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design 30 lbs. Precise miter system and machined base fence support optimize durability and cutting accuracy. The mitre saw has the capacity to cup 3 5/8-inch nested crown and 3 1/2-inch base vertically.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height15.69 Inches
Length25.25 Inches
Weight30 Pounds
Width19.88 Inches
Part NumberDCS361B
ModelDCS361B
Warranty3 year limited warranty

8. Festool

#ad

Festool FS-800/2 32" Guide Rail 800 mm

#ad
Festool #ad - Item package weight: 2. 7783 lb. Model number: FS-800/2. Item package dimension: 36. 0" l x 9. 5" w x 1. 0" h. Country of Origin: Germany.
BrandFestool #ad
ManufacturerFestool #ad
Height36.02 Inches
Length9.49 Inches
Weight1 Pounds
Width0.98 Inches
Part Number491499
ModelFS-800/2
Warranty3-Year Limited Warranty

9. Festool

#ad

Festool 495387 Fine Tooth Cross-Cut Saw Blade For The Kapex Miter Saw, 80 Tooth

#ad
Festool #ad - Made in Germany. 80 tooth; 2. 5mm kerf; 30mm arbor; -5 deg hook angle; ATB. Cross-cut blade for smooth cuts in veneered plywood, melamine, sheet goods, and hard and soft woods. Oversized 30mm arbor enables more secure fastening of the blade to the saw, reducing vibration for more precise cutting. Thin kerfed blades meet less resistance, for more efficient cutting, and produce less material waste.
BrandFestool #ad
ManufacturerFestool #ad
Height12.8 Inches
Length1.97 Inches
Weight1 Pounds
Width11.9 Inches
Part Number495387
Model495387
Warranty3-Year Limited Warranty

10. Keter

#ad

Woodworking Tools and Accessories with Included 12 Inch Wood Clamps – Easy Garage Storage Black/Yellow, Keter, 197283 Folding Table Work Bench for Miter Saw Stand

#ad
Keter #ad - H / folded: 33. 46 in. L x 21. 65 in. L x 21. 65 in. Easy storage: folds down to 4. 4 inches thick for easy storage in a pinch. H. Accessories included: Includes two 12 inch clamps to secure a variety of working materials.

Resin construction: made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs. Dimensions: standing: 33. 46 in. W x 4. 4 in. W x 29. 75 in. Less than 30 lbs: with its lightweight design and sturdy carrying handle, take your workbench just about anywhere. Versatile use: perfect for any kind of project – DIY projects, painting, home improvement, commercial construction work, table saw use, and more. Durable and strong: Weather-resistant polypropylene construction prevents rusting, peeling, and denting. Less than 30 second setup: Unique quick opening and folding system for easy storage and portability.
BrandKeter #ad
ManufacturerKeter #ad
Height29.7 Inches
Length21.7 Inches
Weight26.95 Pounds
Width33.5 Inches
Part Number197283
Model197283
Warranty2 year Warranty