Top 10 Fall Protection Beam Clamp – Fall Arrest Kit Safety Clips

As an Amazon Associate I earn from qualifying purchases.

1. FRONTLINE FALL PROTECTION

#ad

Frontline ST14AH Aluminum Bantam Beamer for 3.5″- 14″ Flange Width I-Beams | 310 lbs Capacity 22kN Breaking Strength | ANSI & OSHA Compliant | Sliding Anchor

#ad
FRONTLINE FALL PROTECTION #ad - Assembled in the USA! Built tough, rugged and corrosion resistant. Beam flange width range: 3. 5″-14″ beam flange Thickness:. 25″-1. 25″. Static tensile strength: 5, 000-lbf/22kN. Ansi z359. 18, ansi z359. 7, osha 1926. 503, osha 191066, en 795:2012 compliant.
BrandFRONTLINE FALL PROTECTION #ad
ManufacturerFRONTLINE FALL PROTECTION #ad
Part NumberST14AH
ModelST14AH

2. FallTech

#ad

Dual Ratcheting for Centering on I-beam, 4" to 14", Steel Jaws w/Slider Pads, FallTech 7530 Steel, Machined Aluminum Bar, Trailing Beam Clamp Steel

#ad
FallTech #ad - Alloy steel jaws for superior strength. Nylon slider pads on jaws provide worker with trailing mobility. Precision machined aluminum bar creates positive lock. Ratcheting design with thumb latches provide ease of adjustment.
BrandFallTech #ad
ManufacturerFallTech #ad
Height4 Inches
Length19 Inches
Weight4.7 Pounds
Width1.5 Inches
Part Number7530
Model7530

3. Guardian Fall Protection

#ad

Aluminum Bar, Beam Anchor with Top Latch Adjustment, Guardian 00102 Beamer 2000+, 3.2 lbs

#ad
Guardian Fall Protection #ad - Construction material: safety anchor bar is made from aluminum that contributes to its robust design. This robust anchor ensures maximum safety to the industrial workers, allowing them to work freely. Wide and up to 1.

25 in. It has nylon bushings that ensure smooth movement of ring across the bar. It can be used in a range of industries for safety restraint applications. And 5000 lbs. Thick flanges. Minimum breaking strength. Application: this aluminum anchor is used with the personal Fall Arrest System. You can attach the anchor at the foot level or use it overhead and connect the lanyard or harness with the D-ring of anchor.

Easy installation: this aluminum beam anchorage can be installed on beams with 3. 5-14 in. Adjustable anchorage: perfect for a wide range of fall protection needs when working with structural steel I-beams. Specification: guardian fall protection beamer anchor weighs 3. 2 lbs. It is constructed of bronze manganese, zinc-plated steel and stainless-steel.
BrandGuardian Fall Protection #ad
ManufacturerGuardian Fall Protection #ad
Height6 Inches
Length20.25 Inches
Weight3.2 Pounds
Width6 Inches
Part Number00102
Model00102
WarrantyLifetime for manufacturer defects

4. KwikSafety

#ad

NC GIBBON GRIP 3 ft Safety Anchor Cross Arm Strap Beam Choker ANSI Fall Arrest System Web pass thru Double D Ring Anchorage Sling OSHA Protection Harness Lanyard, KwikSafety Charlotte

#ad
KwikSafety #ad - Why – “straight from the safety horse’s mouth” | kwiksafety products are proudly designed & shipped from charlotte, correa de anclaje KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. The gibbon grip will always give you Dynamic Protection! . Once connected to a secure anchor point, SRL or a vertical lifeline.

Worker capacity is 310 lbs with a minimum breaking strength of 5000 lbs. Who – “giddy up and go grip strength” | the gibbon grip cross arm strap is a premium fall protection anchor strap with a large double d ring connector. With the durable webbing, and easy to buckle connectors, you can’t go wrong with this great Fall Protection cross arm strap! The web anchor fall safety equipment makes this the perfect high rise guardian! The Gibbon Grip is a 3 foot long pass thru web anchor and the Max. If you have a problem, USA. What – “it’s all in the grip” | the kwiksafety gibbon grip is tested to the most current standard, ansi z359. 18. 2017 and is osha compliant. When – “the double d gibbon grip” | use the kwiksafety gibbon grip for small/light or large/heavy duty uses in residential, aerial lifts, guardrails, fall protection kits, tree trimming, scaffolding platforms, lanyard extension or anchor to a beam, be safe, or industrial markets such as construction, zip line and many more! You can be sure the Gibbon Grip cross arm strap will help you get the job done, arborist, roofing/roofer, swing hanging, commercial, and give you Spider-like Abilities!.

The anchor tie off may be used in horizontal or vertical applications and is a Polyester web pass thru reusable anchorage connector designed to wrap around a static anchor such as an I-beam and other structures.
BrandKwikSafety #ad
ManufacturerKwikSafety #ad
Part NumberKS7801-3FT-1PC
ModelKS7801-3FT-1PC

5. Guardian Fall Protection

#ad

Guardian Fall Protection 11106 Snap Hook

#ad
Guardian Fall Protection #ad - Applicable standards: osha 1910 subpart m, osha 1910 ansi z359. 12-2014, ansi a1032-2012. Class b srl – 900 lbs. Connects directly to harness webbing. Worker capacity range : leading edge 130-310 lbs. Designed to reduce nuisance lock-ups. Non-leading edge 130-420 lbs. Average arrest force.
BrandGuardian Fall Protection #ad
ManufacturerPure Safety Group #ad
Height38 Inches
Length4 Inches
Width12 Inches
Part Number11107
Model11106
WarrantyGuardian Fall Protection (henceforth referred to as GFP) expressly warrants to the purchaser that all GFP products are free from defect in material and workmanship at the time of shipment. This warranty only covers defects in material and workmanship (those resulting from product design and/or manufacture); it does not cover conditions resulting from normal wear and tear, neglect, abuse, or accident. GFP’s obligation under this warranty applies for the lifetime of the product, and is limited to the replacement of product only. This warranty is not transferable to any other GFP service, and does not apply to product that is resold after having been put into service. No other person or firm is authorized to assume or assign for GFP any other liability in connection with the sale or use of GFP products. Furthermore, this warranty is void if any product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. GFP shall not be liable for any punitive or consequential damages of any nature, including loss of profits, loss of revenues, loss of productivity, or delay of project, under any form of liability, including contract, warranty, negligence, wrongful act, or other legal or equal liability. Always refer to your company-specific policies, and refer to state and federal regulations pertaining to the proper use of fall protection equipment.

6. Palmer Safety

#ad

Palmer Safety Fall Protection Safety 4' Cross Arm Strap I 3” Wide Pass-through with Large D-Ring and Small D-Ring I ANSI OSHA Anchorage Sling Compliant Fall Arrest System

#ad
Palmer Safety #ad - And 2. 76 in. Design: 1-3/4” wide polyester webbing stitched with 3” webbing on the back for extra protection. We believe knowledge is power and, in the case of fall protection, Houston, can mean life or death.

004 in. 004 in. Breaking strength: 5000 lbs. We offer the complete package: high quality products serviced by experienced personnel with industry knowledge. Stitching thread: Material: High-tenacity polyester. Metal component: material: alloy steel, Yellow Chromate Finish: Golden Yellow Galvanized Breaking Strength: 5000 lbs. Webbing: material: polyester width: 1. 73 in. Put safety on top of your agendas. Add the palmer safety Cross Arm Strap to your cart today! Why palmer safety - palmer safety is a full service fall protection and safety training organization with offices in New Orleans, New York, and Los Angeles.
BrandPalmer Safety #ad
ManufacturerPalmer Safety #ad
Part NumberA48806

7. Peakworks

#ad

V8229100, Red, ANSI OSHA Compliant, PeakWorks Roof Anchor Bracket, Durable Steel Adjustable Connector, Fall Arrest System, Tool Connects to Wood Surfaces with Roofing Harness Safety Kit

#ad
Peakworks #ad - Weight capacity; roof harness safety kit. Safety certifications – temporary roof anchor bracket meets ansi z359 18, and OSHA safety requirements for residential and commercial roofing applications, csa z259 15, ensuring your safety in the most dangerous conditions.

And has a 310 lb. Strong capacity – hinged roof bracket built with a minimum tensile strength of 5, 000 lb. Compatibility – peakworks roof anchors are designed and approved for use only with PeakWorks connectors, or with components that are approved by PeakWorks to be compatible with this product.

Superior quality – anchor bracket is made with the quality materials ensuring top strength and durability to stand up to the toughest working environments. Reusable roofing tools – re-use this roof anchor bracket as part of your fall arrest system or roofing harness safety kit; roof anchor connects to wood surfaces with a screw size of 3" x #10 32 screws / 16 per side.
BrandPeakworks #ad
ManufacturerPeakworks #ad
Height0.87 Inches
Length14.02 Inches
Weight1 Pounds
Width3.82 Inches
Part NumberV8229100
ModelV8229100

8. WELKFORDER

#ad

WELKFORDER 3D-Rings Industrial Fall Protection Safety Harness With Waist Tounge Buckle | Leg Tounge Buckles | Waist & Shoulder Pad Support ANSI Compliant Full Body Personal Protection Equipment

#ad
WELKFORDER #ad - General waist fitting size 33'' to 45'' great for construction workers, window cleaners etc. After a fall, travel restraint, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.

All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, aging, non-recycled synthetic material having the strength, secure and supported. This harness must be used by a Competent Person. Ergonomic design for proper fit: the combination of "no-loose-ends" shoulders straps, carpenters, roofers, painters, legs straps and chest strap equipped with alloy steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds 59 to 140 kg.

Breaking strength 5000lbs/22kn, one dorsal d-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Safety design performance:welkforder safety harness wfh001wg are used for fall arrest, the design of our full body harness directs load through the shoulder straps supporting the user, suspension and rescue applications. When supported by the dorsal attachment during a fall, positioning, and around the thighs. Each of our products is Individually inspected. Webbing & stitching quality assured: welkforder safety harness webbing is heavy duty and tangle free to keep you comfortable and safe.
BrandWELKFORDER #ad
ManufacturerWELKFORDER #ad
Height4.1 Inches
Length15.8 Inches
Weight5.6 Pounds
Width11.6 Inches
Part NumberWFH001WG

9. Guardian

#ad

Guardian 10787 Premium 6-Foot Cross-Arm Straps with Large and Small D-Rings

#ad
Guardian #ad - Large d-ring and standard size D-ring for pass-thru, this increases the versatility of length adjustment. Twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. 6 feet in length. To shorten the anchorage connector simply wrap the webbing around the anchorage and pass through the large D-ring.
BrandGuardian #ad
ManufacturerGuardian Fall Protection #ad
Height2 Inches
Length11 Inches
Weight1.5 Pounds
Width6 Inches
Part Number10787
Model10787

10. Capital Safety

#ad

Silver/Gold, 3M DBI-SALA 2101630 D-Ring Cadmium Plated w/Anchorage Plate Stainless Steel

#ad
Capital Safety #ad - Extremely rugged and corrosion resistant. D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate. Compact 1/4" x 2" x 4-1/2" 6 x 51 x 114 mm 304 stainless steel plate. Bolt or weld to structure for fall arrest anchor point. For industrial/occupational use only. High strength steel construction.
BrandCapital Safety #ad
ManufacturerDBI/Sala #ad
Height1.4 Inches
Length6 Inches
Weight1.24 Pounds
Width5.5 Inches
Part Number2101630
Model2101630
WarrantyLimited Lifetime