As an Amazon Associate I earn from qualifying purchases.
1. FRONTLINE FALL PROTECTION #ad
Frontline ST14AH Aluminum Bantam Beamer for 3.5″- 14″ Flange Width I-Beams | 310 lbs Capacity 22kN Breaking Strength | ANSI & OSHA Compliant | Sliding Anchor #adFRONTLINE FALL PROTECTION #ad
- Assembled in the USA! Built tough, rugged and corrosion resistant. Ansi z359. 18, osha 191066, osha 1926. 503, ansi z359. 7, en 795:2012 compliant. Static tensile strength: 5, 000-lbf/22kN. Beam flange width range: 3. 5″-14″ beam flange Thickness:. 25″-1. 25″.
2. FallTech #ad
Trailing Beam Clamp Steel, Dual Ratcheting for Centering on I-beam, Steel Jaws w/Slider Pads, FallTech 7530 Steel, 4" to 14", Machined Aluminum Bar #adFallTech #ad
- Precision machined aluminum bar creates positive lock. Nylon slider pads on jaws provide worker with trailing mobility. Alloy steel jaws for superior strength. Ratcheting design with thumb latches provide ease of adjustment.
3. Guardian Fall Protection #ad
3.2 lbs, Beam Anchor with Top Latch Adjustment, Aluminum Bar, Guardian 00102 Beamer 2000+ #adGuardian Fall Protection #ad
- It is constructed of bronze manganese, zinc-plated steel and stainless-steel. Specification: guardian fall protection beamer anchor weighs 3. 2 lbs. This robust anchor ensures maximum safety to the industrial workers, allowing them to work freely.
Wide and up to 1. 25 in. It has a working range capacity of 130-420 lbs. Easy installation: this aluminum beam anchorage can be installed on beams with 3. 5-14 in. Thick flanges.
Minimum breaking strength. And 5000 lbs. It can be used in a range of industries for safety restraint applications. You can attach the anchor at the foot level or use it overhead and connect the lanyard or harness with the D-ring of anchor.
Adjustable anchorage: perfect for a wide range of fall protection needs when working with structural steel I-beams. It has nylon bushings that ensure smooth movement of ring across the bar. Application: this aluminum anchor is used with the personal Fall Arrest System. Construction material: safety anchor bar is made from aluminum that contributes to its robust design.
4. KwikSafety #ad
KwikSafety Charlotte, NC GIBBON GRIP 3 ft Safety Anchor Cross Arm Strap Beam Choker ANSI Fall Arrest System Web pass thru Double D Ring Anchorage Sling OSHA Protection Harness Lanyard #adKwikSafety #ad
- Where – “give props to the gibbon” | the gibbon grip works best mounted to an overhead structural beam or strapped in a manner where a free Fall is restricted to no more than 6 feet and it is not exposed to any sharp, jagged, lanyard, or abrasive edges. The anchor tie off may be used in horizontal or vertical applications and is a Polyester web pass thru reusable anchorage connector designed to wrap around a static anchor such as an I-beam and other structures.
With the durable webbing, and easy to buckle connectors, you can’t go wrong with this great Fall Protection cross arm strap! The web anchor fall safety equipment makes this the perfect high rise guardian! The Gibbon Grip is a 3 foot long pass thru web anchor and the Max.
If you have a problem, si habla Espanol correas cruzadas, USA. Who – “giddy up and go grip strength” | the gibbon grip cross arm strap is a premium fall protection anchor strap with a large double d ring connector. You can be sure that the Gibbon Grip is the perfect tool to get the job done! What – “it’s all in the grip” | the kwiksafety gibbon grip is tested to the most current standard, ansi z359.
18. 2017 and is osha compliant. When – “the double d gibbon grip” | use the kwiksafety gibbon grip for small/light or large/heavy duty uses in residential, tree trimming, aerial lifts, guardrails, roofing/roofer, fall protection kits, commercial, arborist, or industrial markets such as construction, scaffolding platforms, be safe, zip line and many more! You can be sure the Gibbon Grip cross arm strap will help you get the job done, lanyard extension or anchor to a beam, swing hanging, and give you Spider-like Abilities!. Worker capacity is 310 lbs with a minimum breaking strength of 5000 lbs.
5. Guardian Fall Protection #ad
Guardian Fall Protection 11106 Snap Hook #adGuardian Fall Protection #ad
- Applicable standards: osha 1910 subpart m, osha 1910 ansi z359. 12-2014, ansi a1032-2012. Class b srl – 900 lbs. Non-leading edge 130-420 lbs. Connects directly to harness webbing. Designed to reduce nuisance lock-ups. Average arrest force. Worker capacity range : leading edge 130-310 lbs.
|Brand||Guardian Fall Protection #ad|
|Manufacturer||Pure Safety Group #ad|
|Warranty||Guardian Fall Protection (henceforth referred to as GFP) expressly warrants to the purchaser that all GFP products are free from defect in material and workmanship at the time of shipment. This warranty only covers defects in material and workmanship (those resulting from product design and/or manufacture); it does not cover conditions resulting from normal wear and tear, neglect, abuse, or accident. GFP’s obligation under this warranty applies for the lifetime of the product, and is limited to the replacement of product only. This warranty is not transferable to any other GFP service, and does not apply to product that is resold after having been put into service. No other person or firm is authorized to assume or assign for GFP any other liability in connection with the sale or use of GFP products. Furthermore, this warranty is void if any product is changed or altered in any way, or if the product is used in a manner other than for which it is intended. GFP shall not be liable for any punitive or consequential damages of any nature, including loss of profits, loss of revenues, loss of productivity, or delay of project, under any form of liability, including contract, warranty, negligence, wrongful act, or other legal or equal liability. Always refer to your company-specific policies, and refer to state and federal regulations pertaining to the proper use of fall protection equipment.|
6. Palmer Safety #ad
Palmer Safety Fall Protection Safety 4' Cross Arm Strap I 3” Wide Pass-through with Large D-Ring and Small D-Ring I ANSI OSHA Anchorage Sling Compliant Fall Arrest System #adPalmer Safety #ad
- We believe knowledge is power and, in the case of fall protection, New York, Houston, can mean life or death. Metal component: material: alloy steel, Yellow Chromate Finish: Golden Yellow Galvanized Breaking Strength: 5000 lbs.
004 in. Put safety on top of your agendas. Design: 1-3/4” wide polyester webbing stitched with 3” webbing on the back for extra protection. And 2. 76 in. Why palmer safety - palmer safety is a full service fall protection and safety training organization with offices in New Orleans, and Los Angeles.
Webbing: material: polyester width: 1. 73 in. 004 in. We offer the complete package: high quality products serviced by experienced personnel with industry knowledge. Breaking strength: 5000 lbs. Stitching thread: Material: High-tenacity polyester. Add the palmer safety Cross Arm Strap to your cart today! .
7. Peakworks #ad
V8229100, Fall Arrest System, Red, PeakWorks Roof Anchor Bracket, ANSI OSHA Compliant, Durable Steel Adjustable Connector, Tool Connects to Wood Surfaces with Roofing Harness Safety Kit #adPeakworks #ad
- And has a 310 lb. Compatibility – peakworks roof anchors are designed and approved for use only with PeakWorks connectors, or with components that are approved by PeakWorks to be compatible with this product.
Strong capacity – hinged roof bracket built with a minimum tensile strength of 5, 000 lb. Weight capacity; roof harness safety kit. Reusable roofing tools – re-use this roof anchor bracket as part of your fall arrest system or roofing harness safety kit; roof anchor connects to wood surfaces with a screw size of 3" x #10 32 screws / 16 per side.
Safety certifications – temporary roof anchor bracket meets ansi z359 18, and OSHA safety requirements for residential and commercial roofing applications, csa z259 15, ensuring your safety in the most dangerous conditions.
Superior quality – anchor bracket is made with the quality materials ensuring top strength and durability to stand up to the toughest working environments.
8. WELKFORDER #ad
WELKFORDER 3D-Rings Industrial Fall Protection Safety Harness With Waist Tounge Buckle | Leg Tounge Buckles | Waist & Shoulder Pad Support ANSI Compliant Full Body Personal Protection Equipment #adWELKFORDER #ad
- This harness must be used by a Competent Person. When supported by the dorsal attachment during a fall, positioning, and around the thighs. Ergonomic design for proper fit: the combination of "no-loose-ends" shoulders straps, carpenters, legs straps and chest strap equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, painters, roofers, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds 59 to 140 kg.
Waist tounge buckle and Leg Tounge Buckles with Min. Breaking strength 5000lbs/22kn, one dorsal d-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only.
All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. Webbing & stitching quality assured: welkforder safety harness webbing is heavy duty and tangle free to keep you comfortable and safe.
General waist fitting size 33'' to 45'' great for construction workers, window cleaners etc. Safety design performance:welkforder safety harness wfh001wg are used for fall arrest, suspension and rescue applications. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. Each of our products is Individually inspected. Breaking strength 4000lbs/18kN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
9. Guardian #ad
Guardian 10787 Premium 6-Foot Cross-Arm Straps with Large and Small D-Rings #adGuardian #ad
- Twice as durable with dual enforced webbing and heavy duty stitching. The heavy duty wear pad protects the structural webbing against abrasion and snags. To shorten the anchorage connector simply wrap the webbing around the anchorage and pass through the large D-ring.
Large d-ring and standard size D-ring for pass-thru, this increases the versatility of length adjustment. 6 feet in length.
10. Capital Safety #ad
3M DBI-SALA 2101630 D-Ring Cadmium Plated w/Anchorage Plate Stainless Steel, Silver/Gold #adCapital Safety #ad
- Compact 1/4" x 2" x 4-1/2" 6 x 51 x 114 mm 304 stainless steel plate. Extremely rugged and corrosion resistant. For industrial/occupational use only.
D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate. Bolt or weld to structure for fall arrest anchor point. High strength steel construction.
|Brand||Capital Safety #ad|