Top 10 Electrical Outlet Tester – Circuit Testers

As an Amazon Associate I earn from qualifying purchases.

1. Klein Tools

#ad

GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets Klein Tools RT250

#ad
Klein Tools #ad - Safe and durable tester for inspections in north american 120v outlets. In addition to a clear lcd readout, bright green and red LEDs illuminate to show correct or faulty wiring. Test trip time of gfci in seconds.

Detect and identify common wiring faults. Simply remove tester to view the reading. Bright led lights. Illuminate green and red for visual indicators. Auto-hold function is convenient for hard-to-reach outlets. Cat ii 135v safety rating. Durable 6. 6-foot 2 m drop protection. For north american 120v electrical outlets only. Find out if the trip breaker is functioning and how long it takes to trip.

Cat ii 135v safety rating and 6. 6-foot 2 m drop protection. Gfci receptacle tester features large lcd readout. Conditions are wired correctly, dual open Neutral & Ground, open ground, Open Neutral, Reversed Hot/Ground, open hot, and Reversed Hot/Neutral. For use on 3-wire, north American 120V electrical outlets only. View results instantly without the need to look at a chart to understand results.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height2 Inches
Length4.53 Inches
Weight0.26 Pounds
Width1.16 Inches
Part NumberRT250
ModelRT250
WarrantyPlease refer to attached warranty document for information

2. Klein Tools

#ad

Receptacle Tester for GFCI / Standard North American AC Electrical Outlets, Detects Common Wiring Problems, Klein Tools RT210 Outlet Tester

#ad
Klein Tools #ad - Nominal voltage: 110/125v ac at 50/60Hz in 3-wire outlet. Built to withstand a 6. 6-foot 2m drop. Works on gfi outlets and confirms operation of the ground fault protective device. Operating temp: 32-degree to 140-Degree Fahrenheit 0-Degree to 40-Degree Celsius. Detects the most common wiring problems in standard and GFCI receptacles.
BrandKlein Tools #ad
ManufacturerKlein - Geneva Supply #ad
Height1.5 Inches
Length5.3 Inches
Weight0.12 Pounds
Width3.8 Inches
Part NumberRT210
ModelRT210
WarrantyThis product is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. This warranty does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident, misuse, abuse, neglect, or improper maintenance.

3. Sperry Instruments

#ad

Yellow & Black, Electrical AC Voltage Detector, Sperry Instruments STK001 Non-Contact Voltage Tester VD6504 & GFCI Outlet / Receptacle Tester GFI6302 Kit

#ad
Sperry Instruments #ad - Verifies voltage presense: verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting GFI6302 and VD6504.

Quickly read: bright color-coded neon lights for easy visual indication GFI6302. Durable: hi-impact resistant abs housing with soft over-molded rubber grips with a compact ergonomic design GFI6302 and VD6504. Rated: cat rating iii 300v, cat rating iii 1000v, iv 600v, c-ul us gfi6302, vd6504 10 ft drop and 250 lb Crush GFI6302 and VD6504. Circuit sensing: non-contact sensitivity detects 50-1000V AC and patented battery self-test feature VD6504. Audible and visible indicator: 360° visual and beeping audio Non-Contact Voltage Detection VD6504.
BrandSperry Instruments #ad
ManufacturerGardner Bender #ad
Height9 Inches
Length2 Inches
Weight0.3 Pounds
Width6 Inches
Part NumberSTK001
ModelSTK001

4. Klein Tools

#ad

Klein Tools RT110 Receptacle Tester for North American AC Electrical Outlet Receptacles

#ad
Klein Tools #ad - Built to withstand a 6. 6-foot 2m drop. Operating temp: 32-degrees f to 140-degrees F 0-degrees C to 40-degrees C. Designed to detect the most common wiring problems in standard receptacles. Nominal voltage: 110/125v ac at 50/60Hz in 3-wire outlet. Conforms to ul std 1436, certified to CSA Std C22. 2 #160 Light sequence indicates correct/incorrect wiring.
BrandKlein Tools #ad
ManufacturerKlein - Geneva Supply #ad
Height1.8 Inches
Length5.5 Inches
Weight0.12 Pounds
Width3.5 Inches
Part NumberRT110
ModelRT110
WarrantyThis product is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. This warranty does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident, misuse, abuse, neglect, or improper maintenance.

5. Sperry Instruments

#ad

Yellow & Black, Sperry Instruments GFI6302 GFCI Outlet / Receptacle Tester, Standard 120V AC Outlets, Home & Professional Use, 7 Visual Indication / Wiring Legend

#ad
Sperry Instruments #ad - Testing capability: standard 3-wire and gfci protected 120Volt AC Outlets. Warranty: sperry Instruments Backed Limited Lifetime Warranty. Frequency hertz 60Hz GFI6302.

Durable: hi-impact resistant abs housing with soft over-molded rubber grips with a compact ergonomic design GFI6302 and VD6504. Quickly read: bright color-coded neon lights for easy visual indication GFI6302. 10 ft drop and 250 lb Crush. Rated: 10 ft drop and 250 lb crush, c-ul us, cat rating iii 300v, ce-marking and recognized by Occupational Safety Hazards Association OSHA as an National Recognized Testing Laboratory NRTL. Gfci function: tests gfi outlets and standard outlets that are wired in series with GFCI outlets multiple outlets in kitchen or bath.
BrandSperry Instruments #ad
ManufacturerSperry Instruments Inc #ad
Height1 Inches
Length6.75 Inches
Weight0.1 Pounds
Width3.75 Inches
Part NumberGFI6302
ModelGFI6302
WarrantyLimited Lifetime Warranty

6. Klein Tools

#ad

Klein Tools ET310 AC Circuit Breaker Finder with Integrated GFCI Outlet Tester

#ad
Klein Tools #ad - This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.

Receiver delivers clear visual and audible indications when the correct breaker has been located. Transmitter incorporates a gFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices. Tester consists of two parts: a transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker. Operates on 90-120V AC circuits.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height1.39 Inches
Length10.96 Inches
Weight0.45 Pounds
Width2.16 Inches
Part NumberET310
ModelET310
Warranty1 year manufacturer

7. Gardner Bender

#ad

7 Visual LED Tests , Gardner Bender GFI-3501 Ground Fault Receptacle Tester & Circuit Analyzer, for GFCI / Standard / Extension Cords & More, Red, 110-125V AC

#ad
Gardner Bender #ad - Succession of yellow and red lights provide indication of circuit status or specifies wiring errors. Tester trips between 6-9 mA. Tests for ground fault interruption, hot/ground reverse, open neutral, open hot, open ground, hot/neutral reverse and correct wiring. Tests: standard outlets, GFCI outlets, extension cords. Compact and easy to use.
BrandGardner Bender #ad
ManufacturerGardner Bender #ad
Height3.5 Inches
Length2 Inches
Weight0.05 Pounds
Width1 Inches
Part NumberGFI-3501
ModelGFI-3501

8. Klein Tools

#ad

Klein Tools NCVT2PKIT Non-Contact Voltage Tester with Receptacle Tester, 12-48V AC or 48-1000V AC Dual Range for Broad Application

#ad
Klein Tools #ad - Ncvt-2p provides non-contact detection of standard voltage in cables, circuit breakers, cords, lighting fixtures, switches, outlets and wires. Kit contains a non-contact voltage tester and receptacle tester. Ncvt-2p is a lightweight, compact tool with pocket clip for convenient storage and quick access. Dual range ncvt-2p automatically detects and indicates low voltage range and standard voltage 48-1000V AC. Cat iv 1000 volt rating provides expanded operation and protection.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height1.75 Inches
Length9.63 Inches
Weight0.1 Pounds
Width5.13 Inches
Part NumberNCVT2PKIT
ModelNCVT2PKIT

9. KAIWEETS

#ad

Electrical Tester with LCD Display, Buzzer Alarm, KAIWEETS Voltage Tester/Non-Contact Voltage Tester with Dual Range AC 12V-1000V/48V-1000V, Wire Breakpoint Finder-HT100 Red, Live/Null Wire Tester

#ad
KAIWEETS #ad - Safety first: it will send out multiple alarms through sound and light. Dual range: detects standard and low voltage 12-1000v ac / 48-1000v ac for more sensitive and flexible measurements. Press the s button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.

The ncv sensor automatically recognizes the voltage and displays it on the bar graph. At the same time, or the closer it is to the voltage source, red means high voltage and live wire are detected, green means low voltage and null wire are detected. Non-contact: with ncv inductive probe for ac voltage; just place the tip near a terminal strip, you know there's voltage present. Ideal for breakpoint Test. Security level: iec rated cat iii 1000v cat iv 600v, meets ce requirements; the electrical tester is safely double insulated. Handy circuit tester for electricians, outlet, or supply cord.

Compact design: bright led flashlight for work in dim ares; low-power-indicator when battery voltage is below 2. 5v; automatic power off after 3 minutes without operation or signal detection; Pocket-sized, pen hook allows you to carry it in your shirt pocket. When the tip glows red and the pen beeps, homeowners. The live wire detector can automatically detect the live or neutral wire. High voltage alert to warn you of voltage above 90V, the screen turn red and the safety symbol on the screen shines.
BrandKAIWEETS #ad
ManufacturerKAIWEETS #ad
Height0.8 Inches
Length6.2 Inches
Width0.9 Inches
Part NumberKW5023240
ModelNCVT-2

10. Klein Tools

#ad

Pouch and Batteries, Three Testers, Klein Tools CL120VP Electrical Voltage Test Kit with Clamp Meter, Test Leads

#ad
Klein Tools #ad - Ncvt-3p has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications. A convenient chart on rt210 helps determine wiring conditions: open ground, open neutral, open hot, reverse polarity, and hot/ground reversed. Cl120 clamp meter measure ac current via the clamp, and AC/DC voltage, resistance and continuity via test leads. Meter has backlit lcd for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated. Rt210 detects the most common wiring problems in standard and GFCI receptacles.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height2.95 Inches
Length13.07 Inches
Weight1.78 Pounds
Width8.5 Inches
Part NumberCL120VP
ModelCL120VP