Top 10 Drum Sander Sandpaper Rolls – Sander Sheets

As an Amazon Associate I earn from qualifying purchases.

1. Sungold Abrasives

#ad

3" Wide by 35 Feet, Sungold Abrasives 30516 Aluminum Oxide 80 Grit Rolls For Drum Sanders

#ad
Sungold Abrasives #ad - Can be used for any application where cut to size is needed. Premium x-weight aluminum Oxides cuts fast and hold up to the most demanding sanding applications. Can make 4 strips for a 16" drum such as the Jet16-32. Use the strip on the machine as a template to cut the new strip. For use with drum sanders to save money by cutting your own strips.
BrandSungold Abrasives #ad
ManufacturerSungold Abrasives #ad
Part Number30516
Model30516

2. Peachtree Woodworking Supply

#ad

Performax Type Ready-to-Cut Ready-to-Wrap Abrasive Sandpaper Rolls 3 inch by 35 feet Long for 16-32 Drum Sanders

#ad
Peachtree Woodworking Supply #ad - As always, twisted or otherwise imperfect. Take the stock out with no more drum adjustment and proceed to sanding normally. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads.

Straight feed? how about angling your stock feed through the drum instead. Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3” wide rolls. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep.

When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only. Once the down is gone, take extreme care and caution when sanding boards that are bowed, flip the stock over and sand the other side. The grain is resin bonded and have non-loading properties for extra long sanding life. These high performance aluminum oxide rolls are designed for all purpose sanding. The right amount of pressure you exert on your boards is absolutely critical.
BrandPeachtree Woodworking Supply #ad
ManufacturerKeystone #ad
Part Number5
Model5

3. Red Label Abrasives

#ad

Red Label Abrasives 3 Inch X 70 FT 80 Grit Woodworking Drum Sander Strip Roll, Cut to Length

#ad
Red Label Abrasives #ad - We are the manufacturer! factory Direct and precision cut in USA by Red Label Abrasives. Just use an old strip as a template and cut to length! our 3" wide drum sander roll fits: jet performax 10-20 13 wraps/roll, 16-32 9 wraps/roll, Woodtek 25-2 6 wraps/roll, 22-44 6 wraps/roll, 25-2 6 wraps/roll, Ryobi WDS1600 9 wraps/roll and any drum sander that requires 3" wide strips.

Tough cloth backed X wgt material provides a long lasting cut. Premium aluminum oxide open grain resists heat and buildup. Save big by cutting your own drum sanding strips with our continous rolls. Guaranteed or Money Back.
BrandRed Label Abrasives #ad
ManufacturerRed Label Abrasives #ad
Part NumberRXA0800300700

4. Red Label Abrasives

#ad

Cut to Length, Red Label Abrasives 3 Inch X 70 FT 120 Grit Woodworking Drum Sander Strip Roll

#ad
Red Label Abrasives #ad - Just use an old strip as a template and cut to length! our 3" wide drum sander roll fits: jet performax 10-20 13 wraps/roll, 22-44 6 wraps/roll, Woodtek 25-2 6 wraps/roll, 16-32 9 wraps/roll, 25-2 6 wraps/roll, Ryobi WDS1600 9 wraps/roll and any drum sander that requires 3" wide strips.

Guaranteed or Money Back. Tough cloth backed X wgt material provides a long lasting cut. We are the manufacturer! factory Direct and precision cut in USA by Red Label Abrasives. Premium aluminum oxide open grain resists heat and buildup. Save big by cutting your own drum sanding strips with our continous rolls.
BrandRed Label Abrasives #ad
ManufacturerRed Label Abrasives #ad
Part NumberRXA1200300700

5. Sungold Abrasives

#ad

Sungold Abrasives 30526 Aluminum Oxide 80 Grit Rolls for Drum Sanders, 3" Wide by 38'

#ad
Sungold Abrasives #ad - Premium x-weight aluminum Oxides cuts fast and hold up to the most demanding sanding applications. For use with drum sanders to save money by cutting your own strips. Use the strip on the machine as a template to cut the new strip. For 22" drums like the jet 22-44 can make 4 strips minimizing waste. Can be used for any application where cut to size is needed.
BrandSungold Abrasives #ad
ManufacturerSungold Abrasives #ad
Part Number30526
Model30526

6. AcbbMns

#ad

AcbbMns Ready-to-wrap Ready-to-cut 3 in wide by 49 Feet long Aluminium Oxide Abrasive for Drum Sander Sandpaper Continuous Roll Grit:120

#ad
AcbbMns #ad - 3"x49' 76. 2mmx15 meters Sandpaper Roll. Abrasive sandpaper roll can work with the industry standard Performax, Jet 16-32 sanders and other machinery that accepts 3” wide rolls. Cut to length, Prevents waste and increases versatility. Use for:designed to work with an assortment of general purpose sanding and woodworking applications. Cloth backed resin Aluminum Oxide Abrasive Sanding Roll.
BrandAcbbMns #ad
ManufacturerAcbbMns #ad
Part Number120

7. Red Label Abrasives

#ad

Cut Strips to Length, Red Label Abrasives 3 inch X 70 FT 120 Grit Zirconia Woodworking Drum Sander Roll

#ad
Red Label Abrasives #ad - Zirconia will outlast any standard sanding strip when used on hard woods. Use zirconia alumina material for drum sanding and planing of hard woods.

Tough cloth backed Y wgt material provides a long lasting cut. We are the manufacturer! factory Direct and precision cut in USA by Red Label Abrasives. Guaranteed or Money Back. Save big by cutting your own drum sanding strips with our continous rolls. Just use an old strip as a template and cut to length! our 3" wide drum sander roll fits: jet performax 10-20 13 wraps/roll, 16-32 9 wraps/roll, woodtek 25-2 6 wraps/roll, 22-44 6 wraps/roll, 25-2 6 wraps/roll, Ryobi WDS1600 9 wraps/roll and any drum sander that requires 3" wide strips.
BrandRed Label Abrasives #ad
ManufacturerRed Label Abrasives #ad
Height3 Inches
Length8 Inches
Weight4.29 Pounds
Width8 Inches
Part NumberRZ51200300700

8. Jet

#ad

120 Grit, JET Ready-To-Cut Sandpaper, 3-Inch Width 60-9120

#ad
Jet #ad - Item package Weight: 5. 0 lb. Country of Origin: United States. Item package dimension: 12. 3" l x 4. 8" w x 12. 8" h. Model number: 60-9120 .
BrandJet #ad
ManufacturerPerformax #ad
Height11.8 Inches
Length11.3 Inches
Weight5 Pounds
Width3.8 Inches
Part Number60-9120
Model60-9120
Warranty90 Day

9. Renegade Products

#ad

Drum Sander Sandpaper Roll 3" X 25 Yards Premium Aluminum Oxide Cloth Backed Made in USA 220 GRIT

#ad
Renegade Products #ad - This is heavy duty and meant to last for your woodworking or metal working application! Satisfaction guaranteed - We guarantee you will love the quality of our abrasive rolls or your money back!!! Can get up to 20 wraps! - depending on your drum size you can get up to 18 wraps with our sandpaper roll! these are premium rolls that are 25 yards in length that can be cut to save you the most amount of money and give you the most amount of sanding time possible! Heavy duty - this roll is made with a heavy duty polyester X-weight backing that can be used for any metal or woodworking application! Made in anaheim, California and are proud to be american made! Long life - our material uses an ultra premium heat treated aluminum oxide grain that can withstand more pressure, california - Our drum sander rolls are made in Anaheim, heat and grinding than any other abrasive out there.

BrandRenegade Products #ad
ManufacturerMaverick Abrasives #ad

10. Renegade Products

#ad

Drum Sander Sandpaper Roll 3" X 25 Yards Premium Aluminum Oxide Cloth Backed Made in USA 150 Grit

#ad
Renegade Products #ad - This is heavy duty and meant to last for your woodworking or metal working application! Satisfaction guaranteed - We guarantee you will love the quality of our abrasive rolls or your money back!!! Can get up to 20 wraps! - depending on your drum size you can get up to 18 wraps with our sandpaper roll! these are premium rolls that are 25 yards in length that can be cut to save you the most amount of money and give you the most amount of sanding time possible! Heavy duty - this roll is made with a heavy duty polyester X-weight backing that can be used for any metal or woodworking application! Made in anaheim, California and are proud to be american made! Long life - our material uses an ultra premium heat treated aluminum oxide grain that can withstand more pressure, california - Our drum sander rolls are made in Anaheim, heat and grinding than any other abrasive out there.

BrandRenegade Products #ad
ManufacturerMaverick Abrasives #ad