Top 10 Drill Bit Extension 24 Inch – Hex-Shank Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. MAGBIT

#ad

MAGBIT 782.24.0716QC MAG 782 7/16-Inch by 24-Inch Extension with Quick Change Shank

#ad
MAGBIT #ad - Allows safer use of tool at extended distance. Quick change shank. Spring loaded for one handed loading and unloading of quick change bits. Has quick change shank to fit quick change chucks.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Weight1.37 Pounds
Part Number782.24.0716QC
Model782.24.0716QC
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

2. MAGBIT

#ad

MAGBIT 786.24.0616 MAG786 3/8-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

#ad
MAGBIT #ad - 82 degree point for faster starts. Fish eye hole provided near tip of flutes to aid in pulling wire. 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over. Fish eye hole provided near tip of flutes to aid in pulling wire.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Part Number786.24.0616
Model786.24.0616
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

3. MAGBIT

#ad

MAGBIT 786.24.0816 MAG786 1/2-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

#ad
MAGBIT #ad - 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over. Fish eye hole provided near tip of flutes to aid in pulling wire. 82 degree point for faster starts. Fish eye hole provided near tip of flutes to aid in pulling wire.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Part Number786.24.0816
Model786.24.0816
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

4. MAGBIT

#ad

MAGBIT 786.24.0416 MAG786 1/4-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

#ad
MAGBIT #ad - Fish eye hole provided near tip of flutes to aid in pulling wire. 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over. Fish eye hole provided near tip of flutes to aid in pulling wire. 82 degree point for faster starts.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Part Number786.24.0416
Model786.24.0416
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

5. Irwin Tools

#ad

3/8-Inch Shank, 24-Inch Length, IRWIN 1890945 Flexible Installer Drill Bit with High-Speed Steel Tip

#ad
Irwin Tools #ad - Unique combination of 135 degree self-centering split point stepped to 118 Degree hole enlarging body for fast, easy starts and smooth drilling. Tapered flute for faster chip ejection, less binding and smoother drilling Does not apply to 1/4" diameter SKUs. Premium high speed steel construction for extended drilling life in metal, wood and plastic. 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling. Hole in flute for easy wire pulling through walls, ceilings and floors.
BrandIrwin Tools #ad
ManufacturerIRWIN #ad
Height27.76 Inches
Length0.79 Inches
Weight0.35 Pounds
Width3.07 Inches
Part NumberIrw-6865
Model1890945

6. Milwaukee

#ad

24 X 7/16 In, All Hex, Bit Extension

#ad
Milwaukee #ad - Impact rated, making this the most versatile extension on the market. Manufacturer: Milwaukee. Quick change of bits, no tools required. Exclusive quik-Lok accepts all 7/16in shanks. Power cutting & Sawing. Country of manufacture: China.
BrandMilwaukee #ad
ManufacturerMilwaukee #ad
Height0 Inches
Length0 Inches
Weight0.55 Pounds
Width0 Inches
Part Number48-28-1060
Model48-28-1060

7. Eagle Tool US

#ad

ETHX25036, Eagle Tool US Installer Bit and Drill Bit Extension, 36-INCH

#ad
Eagle Tool US #ad - Three flat non-slip grip on the chuck end. Custom slip resistant nylon patch set screws. New extensions designed to extend not only tree flat cable bits but also any 1/4-inch hex shank drill bit. Made in USA. Internal hex for attaching 1/4 hex shank in drill bits.
BrandEagle Tool US #ad
ManufacturerEagle Tool US #ad
Height0.56 Inches
Length36 Inches
Weight0.57 Pounds
Width0.56 Inches
Part NumberETHX25036
ModelETHX25036
Warranty30 day manufacturers warranty

8. Titan Tools

#ad

18-Inch, Titan 16018 Quick Release Extension Bit Holder

#ad
Titan Tools #ad - 18" length helps reduce back strain. Locking, magnetic, low profile, quick release bit holder. Auto locking drive. Extra-long extended driver for hard to reach areas. Outer sleeve allows for holding and directing the tool without any discomfort.
BrandTitan Tools #ad
ManufacturerTitan #ad
Height20.1 Inches
Length0.2 Inches
Weight0.45 Pounds
Width2 Inches
Part Number16018
Model16018

9. BOSCH

#ad

BOSCH Daredevil DSBE1012 12-Inch Drill Bit Extension , Blue

#ad
BOSCH #ad - Features a full cone threaded tip for fast and effortless drilling. Hex shank power Groove to reduce slippage. Hex shank power Groove to Reduce Slippage.

Features a full cone threaded tip for fast and effortless drilling. The item is bosch daredevil DSBE1012 12-inch drill bit extension. Provides a cleaner hole quality with reduced breakout. 1 4-inch hex drive extension for Bosch spade bits. Spur and reamer tips for cleaner holes. Used for power tool accessories, drill bits & accessories. Provides a cleaner Hole Quality with Reduced Breakout. 1/4-inch hex drive extension for Bosch Spade Bits. The product is manufactured in China. Spur and reamer Tips for cleaner holes.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight0.3 Pounds
Width0 Inches
Part NumberDSBE1012
ModelDSBE1012

10. ARES

#ad

ARES 70207-12-Inch Quick Release Bit Holder, Works With All 1/4-Inch Drive Bits, Quick Release Mechanism Makes Changing Bits a Breeze

#ad
ARES #ad - How it works: this quick release bit holder's locking red sleeve combined with the magnetic retention allows you to get into those hard to reach areas without loosing your bits. You are backed by our Performance Assurance Limited Lifetime Warranty. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program.

Design considerations: our quick release bit holder works with all 1/4-inch drive bits and features a magnetic locking design that ensures that your bits aren't going anywhere! The ergonomic black outer sleeve rotates freely for maximum stability. If you have a pet, they are part of the family. When you're ready to eject the bit, simply push the sleeve up and you're set to swap it out! Reliable | effective | efficient: users trust ares to be quality tools. With your support, you realize they are more than a pet, weâ€re proud to help this great organization. ". If you have any issues with your ares 12-inch Quick Release Bit Holder, parts, replacement, simply contact customer service for troubleshooting help, or refund.

". Our quick release bit holder also a features a free-spinning black sleeve to allow you to stabilize your bit while in use. The 12-inch-long reach will allow you to get into those hard to reach areas without straining your back and neck!". Item specifications: this 1/4-inch drive quick release bit holder is constructed from premium chrome vanadium steel and features a Quick Release Locking Aluminum sleeve with a super strong magnet for superior bit retention.
BrandARES #ad
ManufacturerARES #ad
Part Number70207