Top 10 CNC Bits 1/4 inch Shank – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Carving Engraving Grinding, SpeTool Spiral Router Bits Up&Down Compression Bit 1/8 inch Cutting Diameter

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Up&down solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1inch cutting length, 2-1/2 inch extra long for total length. Industrial quality control to ensure best performance. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Cycles and dados, Mortises, Plunge cut leave with clean edge and top surface, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-U&D

2. SpeTool

#ad

SpeTool CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, Carving, 1/4 inch Shank HRC55 Solid Carbide End Mill for Wood Cut

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. For plywood, mdf, oak, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-U

3. Whiteside

#ad

Whiteside 6210 CNC Spoilboard Surfacing Router Bit, 1/4" Shank

#ad
Whiteside #ad - Cut diameter: 1". Shank: 1/4" for smaller CNC machines. Cut length: 1/4". Whiteside router bits cnc spoilboard Cutter: Spoilboard cutters are designed specifically to resurface, or plane, the top surface of the spoilboard. Made in the USA.
BrandWhiteside #ad
ManufacturerWhiteside Machine #ad
Height1.05 Inches
Length5.35 Inches
Width2.9 Inches
Part Number6210

4. SpeTool

#ad

SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter, 1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver

#ad
SpeTool #ad - The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly downcut groove and slots, Cycles and dados, Mortises, Plunge cut leave with clean edge and top surface, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-D

5. SpeTool

#ad

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

#ad
SpeTool #ad - The carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter. For cnc, mdf, engraving machine woodworking, stainless steel, plywood, Carving soft and hard wood, titanium alloy etc. Include 2*carbide end mills 1 pc v-groove end mill, 2*Spiral router bit 1 pc up cut, 1pcs tapered end mill, 1 pc down cut. The carbide end mill suit for cnc router, xcarve and Makita, bosch, and Any Brand Plunge Router with 1/4" Collet. Long service life, Decreasing the times of changing cutters, Saving production time.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Length10 Centimeters
Part NumberWD-1
ModelWD-1

6. BINSTAK

#ad

CNC Spoilboard Surfacing Router Bits, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK Carbide, 1/4 inch Shank 1 inch Cutting Diameter

#ad
BINSTAK #ad - High quality cnc surfacing router bit: the sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Avoid cutting metal and non-wood materials. Such as woodworking engraving machine, trimming machine.

This cnc router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. Great replacement bit tool for woodworking carpenter! Use range for cnc routing bits: suitable for solid woods, plywood compact panel, particle board, laminate, MDF, acrylic and etc.3

3 wings wood cnc router bit: shank: 1/4”; Cut Diameter:1”; Cut Length: 1/4”. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Versatile routing tool: this professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.
BrandBINSTAK #ad
ManufacturerNITOMAK #ad
Part NumberBK-191028

7. SpeTool

#ad

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

#ad
SpeTool #ad - The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Solid carbide spiral downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-D

8. BINSTAK

#ad

Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK, CNC Spoilboard Surfacing Router Bit, 1/4" Shank 1-1/2" Cutting Diameter

#ad
BINSTAK #ad - This planer router bit is perfect for wood slabs flattening, laminate, particle board, resurface or plane the top surface of the spoilboard. Replace the carbide inserts when needed, instead of replacing the whole bit.

Cost-effective insert bit: the surfacing router bit utilizes 4-sided solid carbide inserts. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. 2-wing design, resulting in a more balanced tool while running. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Industrial grade cnc wood router bit: Super-strength steel body with anti kickback design, 2 cutting blades.

Such as woodworking engraving machine, trimming machine, etc. 2-wing insert cnc router bit: shank: 1/4"; cut diameter: 1-1/2" ; Carbide Inserts: 12*12mm. Cost effective solution compared to brazed router bits and solid carbide spiral bits. Used on soft and hard woods, plywood compact panel, MDF, acrylic and etc.
BrandBINSTAK #ad
ManufacturerBINSTAK #ad
Part Number1/4 insertRB 1-1/2inch

9. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving, SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter

#ad
SpeTool #ad - Solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. For plywood, oak, mdf, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/8-U

10. SpeTool

#ad

1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines, SpeTool Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter

#ad
SpeTool #ad - Up & down solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Cycles and dados, Mortises, Plunge cut leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U&D