Top 10 Circulating Pump for Hot Water – Power Water Pumps

As an Amazon Associate I earn from qualifying purchases.

1. Watts Premier


Watts Premier Instant Hot Water Recirculating Pump System with Built-In Timer

Watts Premier #ad - Easy installation: install in less than 1 hour. This unique product easily connects to existing plumbing and is maintenance-free. Watts recirculating hot water pump: Provides hot water at every faucet or shower when needed, eliminating wasted water, 05 inches bypass value.

Recirculating pump with timer: 24-hour programmable timer activates pump when you need it. Save up to 10% of your water bill. Do not use with tankless water heaters. Watts hot water recirculating system: The kit includes a pump with timer, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines.

Best selling recirculating system: conserve up to 15, 000 gallons of water per year. Insert the 115v plug on the line cord from the pump into a properly grounded 115V outlet. No vibrations: it’s extremely quiet compared to other systems in the market. It costs only $005 per day to operate.
BrandWatts Premier #ad
ManufacturerWatts #ad
Height5 Inches
Length6.25 Inches
Weight6.4 Pounds
Width6 Inches
Part Number0955800
Warranty1-Year Limited Warranty

2. Grundfos


UP15-42F, Grundfos 59896155, SuperBrute Recirculating Pump 1/25 HP,115 -Volt, SMALL RED

Grundfos #ad - Stainless steel rotor can and bearing plate. Cast iron pump housing. Carbon axial bearing. Corrosion-resistant impeller, Composite, PES. Ceramic shaft and radial bearings.
BrandGrundfos #ad
ManufacturerGrundfos #ad
Height6.5 Inches
Length5.25 Inches
Weight7 Pounds
Width4.19 Inches
Part Number59896155



KOLERFLO 3/4" NPT Hot Water Circulation Pump Stainless Steel Recirculating Water Pump for Portable Water SystemRS15-6 SS Green

KOLERFLO #ad - The circulation water pump features high efficiency with low consumption. Voltage/frequency: 110-120v, composite, 60hz. In addition, the floor will also become warm. Impeller: Corrosion-resistant, PES. Bearing: Carbon axia. Flow: 36/29/20 lpM 9. 5/7. 66/5.

28 gpm. Shaft: 45 # steel. Npt 3/4 inch 19. 05 mm inlet/outlet. Super silent, saving energy, such as desert areas. Max pressure: 145 psi 10 bar, the circulation pump with three-speed control. Max head: 6/4. 9/4 m 20/16/13 ft;pump housing: Aluminum. Prevent pipes from freezing in winter, if your pipes pass through the floor, especially for cold winter areas. Easy installation, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, only need a wrench to connect the pump to the pipeline, now it takes only 15 seconds to get hot water.

High temperature resistance, suitable for water scarce areas, anti-fraying, running power, environmental friendly, reducing the waste of cold water and waiting time, high flow and leak-tightness. Rated power: 93/67/46 w. Kolerflo circulation water pump rs15-6 used in suitable for city buildings, solar circulating water, air conditioning, water and pressurized with industrial equipment, houses, boilers, suburban villas, hot water circulating warm and so on.
ManufacturerKOLERFLO #ad
Height7.1 Inches
Length8.9 Inches
Width6.8 Inches

4. Grundfos


Grundfos GRU-595916 595916

Grundfos #ad - The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. Connection: 3/4-inch m by 3/4-inch fnPT. Maintenance-free, easy to install, low energy consumption, quiet running. Flow range: 0 - 9 u. S. Supply voltage:115-120 vac, 60 hertz, Contact Rating: 16 amps. Gpm, head range: 0 - 6-Foot. Tlc = timer, line Cord, 6-Foot. The grundfos circulator pumps, series up, are specifically designed for heating systems. Motors: single phase, 115v.
BrandGrundfos #ad
ManufacturerGrundfos #ad
Height10 Inches
Length10 Inches
Width10 Inches
Part NumberGRU-595916
Warranty2 years from the date of installation



BACOENG 3/4 inch NPT Hot Water Circulation Pump for Floor Heating & Recirculating System w/Connectors

BACOENG #ad - Flexible application - directly used in hot water recirculating and industrial cooling system. Features & material - built-in high sensitive electronic sensors with three-speed control, designed for energy saving≤1kW·h one day; Super silent, hardly feel it at work; Anti-fraying; Cast Iron Pump.

Main parameter - power:93/67/46w; in/outlet:3/4''npt; voltage:115v, 60hz; Installation length:5. 1inches; liquid:32 - 230℉; Green. Npt standard vs others bsp - 1/2" x 3/4" npt, lead-free brass fitting *2; The most useful & standard connector to prevent the leaks in hot water recirculating system. 2 years Warranty. Add a bridge valve to be used in no return pipe system. Also a wise choice for DIY: Add a timer to be more energy saving.
BrandBACOENG #ad
ManufacturerBaco Engineering #ad
Part NumberP0168

6. Taco


Taco 006-B4 Bronze Circulator Pump 3/4-Inch Sweat

Taco #ad - Maximum working Pressure: 125 psi. This product runs using a 0025 1/40 horsepower motor. Direct drive-low power consumption - Unique Replaceable Cartridge Design-Field Serviceable. Connection Sizes: 3/4 Sweat. Cast iron, flanged or bronze Construction with Sweat, Threaded or Union Connections. Minimum fluid Temperature: 40F. Self-lubricating - no mechanical Seal - Unmatched Reliability --Maintenance Free. Flow range: 0-10 gpm; head Range: 0-9 Feet. Maximum fluid Temperature: 220F. Standard high capacity Output-Compact Design - Quiet, Efficient Operation.
BrandTaco #ad
ManufacturerTaco #ad
Height7 Inches
Length5 Inches
Weight4.55 Pounds
Width4 Inches
Part NumberGID-523082

7. bayite


Bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM

bayite #ad - Max flow Rate: 2. 1gpm, max discharge Head: 9. 8ft. Power source: dc 12vpower adapter included, rated current: 07a, brushless motor, low noise: 30db at 1 metre, Service life: 30000 hours. Max circulating water temperature: 100°c/212°F. One year warranty: replacement without return. Circulation pump is non-self-priming pump. Comes with a power adapter. It's submersible but can't be immersed in hot water exceeding 50°C/122℉. The od of the brass coupler is 10mm. 1/2" male thread on the pump.
Brandbayite #ad
Manufacturerbayite #ad
Weight0.66 Pounds
Part NumberBYT-7A015



Laing LHB08100092 AutoCirc Recirculation Pump with Timer

LAING #ad - Requires only 14 watts of power; Does not require a return line. Long power cord. Packaged complete with a 6 ft. The auto circ pump act e1 is installed under the sink or faucet farthest from the water heater. Noise level - Whisper quiet, less than 30 db. Has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage. Saves the average family of four up to 17, 000 gallons of water annually.
BrandLAING #ad
ManufacturerLaing #ad
Height7.5 Inches
Length0.1 Inches
Width5 Inches
Part NumberLHB08100092
WarrantyWarranted against defects in materials and workmanship for 2 years from the date of manufacture or 1 year from the date of user purchase, whichever is sooner.



EXTRAUP 3/4 NPT 110V Hot Water 3-Speed Cast Iron Circulation Pump Circulator Pump

EXTRAUP #ad - Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment. Outlet: 3/4"in, max flow: 30l/min, max head: 6. 0m, liquid temperature range: 0℉ -+212℉. No leakage, environmental protection, aesthetics, low noise, ease of installation and so on. Pump housing: aluminium; impeller: PP; Motor wire: Copper; Shaft: Ceramic; Bearing: China. Power: 100/67/46w, volt/freq: 110-120v/60Hz.
BrandEXTRAUP #ad
ManufacturerEXTRAUP #ad
Part NumberB07DPDVKHD



Threaded, Laing LHB08100085 Low Flow Circulating Pump with Cord

LAING #ad - Bs 1/2-inch - brass inline housing with 1/2-Inch threaded fittings. Dry run cutout provided on pumps for hot water recirculation. Timer not included. Rated for temperatures to 230 degree F and line pressures to 150 PSI. Requires only 33 watts of power.
BrandLAING #ad
ManufacturerLaing #ad
Part NumberLHB08100085
WarrantyWarranted against defects in materials and workmanship for 2 years from the date of manufacture or 1 year from the date of user purchase, whichever is sooner.