As an Amazon Associate I earn from qualifying purchases.
1. Steel Dragon Tools #ad
Steel Dragon Tools MD45 Magnetic Drill Press with 7PC 2in. HSS Annular Cutter Kit #adSteel Dragon Tools #ad
- Steel dragon tools md45 magnetic Drill Press with 2700 lbs. Includes mt2 to MT1 converter. Kit includes six 6 high speed steel annular cutters with 2-inch cut depth and one 1 pilot pin.
Maximum force. Bit sizes included: 9/16 in. 11/16 in. 13/16 in. 1 in. 15/16 in. And 1-1/16 in. Includes mt2 to 3/4-inch Weldon Adapter spindle adapter.
2. Mophorn #ad
Mophorn 1100W Magnetic Drill Press with 1-1/2 Inch 40mm Boring Diameter MD40 Magnetic Drill Press Machine 2810 LBS Magnetic Force Magnetic Drilling System 670 RPM with 11 Pcs HSS Annular Cutter Kit #adMophorn #ad
- It is capable of drilling into toughest materials at 550 RPM. Various applications: this versatile magnetic drill press is immensely suitable for industrial and steel fabrication, home improvement, wind power generation, equipment installation, power-plant construction, ship or bridge building, railway manufacture, and a wide swath of other fields.
User-friendly design: the double dovetail rail adds rigidity and improves the wear resistance of magnetic drill press. Thanks to its electromagnet base, 000 n magnetic Force: The powerful two-stage magnet can generate 12, our magnetic drill press anchor itself securely during use through its solid iron bottom.
Also, 21mm, 15mm, 20mm, 26mm, 16mm, 18mm, we provide you a rust-proof stainless steel cooling pot and a pilot pin. The pilot pin can remove screws and assist in the installation & removal of bits.
This ergonomic design handle provides comfortable grip in operation and transport. Superior performance: our portable drill press generates exceptionally strong power thanks to its 1100W copper motor. These 3 extended crank handles are coated with nonslip rubber for labour-saving operation. 12, 000 n of holding force, ensuring the drill press machine will not move in the work. Premium coring bits & cooling pot: there are 11 chisel bits: 12mm, 27mm, 23mm, 13mm, 24mm, meeting a variety of demands for coring.
|Part Number||MD40 Magnetic Drill|
3. Evolution #ad
6-Piece, Evolution Power Tools A-CC6SET-1 CYCLONE Premium 1-Inch Annular Cutter Set with Pilot Pins-For Use With Magnetic Drills #adEvolution #ad
- Free pilot Pin Included. Made of m2al high Speed Steel. 3/4" weldon shank with 2 flats - fits most standard magnetic drill presses.
4. Steel Dragon Tools #ad
Steel Dragon Tools MD50 Magnetic Drill Press with 7pc 1in. HSS Annular Cutter Kit #adSteel Dragon Tools #ad
- Kit includes six 6 high speed steel annular cutters with 1-inch cut depth and one 1 pilot pin. Rack and pinion gear system for exact drilling depth.
Suitable for drilling on any metal surface. Bit sizes included: 9/16 in. 13/16 in. 11/16 in. 1 in. 15/16 in. And 1-1/16 in. Motor: high-speed series, 110 v, induction, 60 Hz, 1850 w, 15 A.
5. Steel Dragon Tools #ad
Steel Dragon Tools MD45 Magnetic Drill Press with 13PC 1in. HSS Annular Cutter Kit #adSteel Dragon Tools #ad
- Includes mt2 to MT1 converter. Kit includes 11 high speed steel annular cutters with 1-inch cut depth and one 1 pilot pin. Bits: 7/16 in. 1/2 in.
5/8 in. 9/16 in. 13/16 in. 7/8 in. 3/4 in. 11/16 in. 15/16 in. 1 in. Includes mt2 to 3/4-inch Weldon Adapter spindle adapter. Maximum force. Steel dragon tools md45 magnetic Drill Press with 2700 lbs.
6. Hougen #ad
15/16, 1-1/4 & 1-3/8" 1-Inch Depth of Cut For use Exclusively in The HMD130/HMD150, 9/16, 1-1/8, 1/2, 11/16, 5/8, 7/8, 3/4, 1-1/16, 13/16, 1, Hougen 17808 RotaLoc Plus Master Kit 7/16 #adHougen #ad
- Rotaloc plus annular cutters are designed for the Hougen HMD130 Low Profile Magnetic Drill. For optimum cutter tool life and cutter efficiency use Hougen Slick-Stik Lubricant.
Truck Frame Drill. They’re made of m42 high speed steel, feature Stack Cut geometry for penetrating multiple plates in a single pass and are designed for a full 1" D. O. C. 7/16, 1/2, 13/16, 1-1/16, 11/16, 7/8, 3/4, 5/8, 1-1/8, 1-1/4 & 1-3/8" rotaloc plus cutters and two pilots 17810 in a sturdy plastic case For HMD130 only.
They feature a 5/8" bayonet-style shank mounting for fast change out, with no tools required to install in the drill spindle, and can be as easily removed. Kit contains 14 cutters, 1, 9/16, 15/16, 1" d. O. C.
7. Hougen #ad
9/16”, Hougen 11075 RotaCut High Speed Steel Cutter Kit 5/16”, 3/4", 1/2", 3/8" Shank, 1/4" Cutting Depth, 3/8", 7/16”, 5/8, Bright Finish #adHougen #ad
- Holemaking – faster and easier than with conventional twist drills andhole saws – in Sheet Metal; Plate Materials; Hardened Steel, Mild Steel; Stainless Steel and Plastics; For use in hand held drills with either 3/8" or 1/2" diameter chucks, or air feed drill spindles for production work.
They can produce holes up to 3x faster than hole saws and last 10x longer. Hougen sheet metal hole cutters are not hole saws - they’re precision ground and heat treated high-performance cutting tools that produce clean, round holes without ripping, tearing, burr-free, or deforming the surrounding material.
Hougen sheet metal hole cutters are perfect for: electrical; pipe and Tubing; Conduit Work; Sheet Metal fabrication; Maintenance Installations; HVAC / PHCC; Automotive Aftermarket and many other industries.
Hougen’s sheet metal hole cutters allow you to maximize feed rates and distribute the cutting load evenly over many cutting edges, leaving the center as a slug, rather than just two edges as a twist drill. Also, hougen sheet metal hole cutters convert a smaller area to chips, by cutting around the hole, requiring less horsepower and thrust than twist drills. For use in hand held drills with either 3/8" or 1/2" diameter chucks, or air feed drill spindles for production work.
|Warranty||90 day warranty|
8. Hougen #ad
Hougen 11087 Fractional Rotacut Combo Kit, 19 Piece, 5/16 to 1-1/2 Inch #adHougen #ad
- Packaged in a sturdy plastic storage case, material Application Aluminum; Mild Steel; Stainless Steel; Steel, Flatted:Yes, Finish/Coating: Bright, Number of Flats: 3.
Annular design cuts the periphery of the hole, Drills holes 3 times faster than twist drills or hole saws. Made in u. S. A. Used in hand-held electric drills and in drill presses, Can drill holes 1/4” or 1/2” thick depending on diameter.
Includes: plastic tool case, 1-3/8", extra pilots, 1", 7/8", center punch, & 11088 arbor assembly, 1-1/8" 1-1/4", 3/8" 7/16" 1/2" 9/16" 5/8" 3/4", 11005 & 13 cutters: 5/16", & 1-1/2". Virtually burr-free holes, Doesn't deform surrounding material, while deburring holes.
9. Hougen #ad
Fractional, 9 Piece 7/8 to 1-1/2" Cutter Diameter 1/2" Cutting Depth, Hougen 11078 RotaCut Large Diameter Hole Cutter Kit #adHougen #ad
- Used in hand-held electric drills and in drill presses, Can drill holes 1/4” or 1/2” thick depending on diameter. Includes:6 annular cutters; 1/2" arbor assembly; center punch; pilot - 7/8; 1; 1-1/8; 1-1/4; 1-3/8; 1-1/2 MADE IN U.
S. A. Virtually burr-free holes, Doesn't deform surrounding material, while deburring holes.
Annular design cuts the periphery of the hole, Drills holes 3 times faster than twist drills or hole saws. Packaged in a sturdy plastic storage case, material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number of Flats: 3.
|Warranty||90 day warranty|
10. VEVOR #ad
200-550RPM Stepless Speed Electromagnetic Drill Press, 1100W Drill Press, 2.16" Depth 1.57" Dia Magnetic Core Drill, VEVOR Mag Drill, 2700LBS Boring Tool Drill Press, 11 PCS HSS Annular Cutter Kit #adVEVOR #ad
- Adjustable height & cooling system: the aluminum alloy double dovetail guide rail of the mag drill can adjust the height of the motor. 2700 lbs magnetic force: the magnetic drill press’s maximum magnetic force is 12000 N / 2700 lbs, suitable for clumsy working space.
No-load speed: 200-550rpm. Our coolant tank effectively helps your rig get rid of the overheating. The foot size of drill machine is 166 X 80 mm / 6.
53" x 3. 15". Taking advantage of the panel is beneficial to achieve stemless speed regulation of the drill press. Drilling bits: Φ12, Φ23, Φ21, Φ13, Φ15, Φ16, Φ26, Φ18, Φ27.
Widely application: the electromagnetic drill press plays a vitally important role in shipbuilding, bridge engineering, wind power generation, equipment manufacturing, equipment installation, and other engineering facilities. Maximum boring diameter: 1. 57inches / 40 mm. Maximum boring depth: 2. 16 inches / 55 mm. High performance: motor power: 1100 w, Φ24, Φ20, 60 hz.
|Model||Mag Drill 550rpm|