Uncategorized

Top 10 26mm Drill Bit – Short Length Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. uxcell

#ad

Uxcell 26mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

#ad
uxcell #ad - Common flute and overall length for minimal adjustment during tool changes. Please note: to make clean and precise holes, water is required for lubrication and cooling when drilling metals.

Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Increased use of water lubrication will extend drill bit life. Black oxide finish - black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge. Reduced shank - expanding the size range capacity of a portable drill chuck. Wide application - design for drilling in low and medium tensile strength materials, such aluminum, copper, iron, brass and metal. High speed steel tool - 26mm cutting diameter.
Branduxcell #ad
Manufactureruxcell #ad
Height1.97 Inches
Length7.48 Inches
Width1.97 Inches
Part Numbera18103100ux0199

2. uxcell

#ad

Tungsten Carbide Wood Hole Saw Auger Opener, uxcell Forstner Drill Bits 26mm, Gray, Woodworking Hinge Hole Drilling Boring Bit Cutter Blue

#ad
uxcell #ad - Applications: can be used for drilling holes on wood and plastic products, furniture, solid wood boards, plywood, plastics, door hinge. Forstner drill bit is for ordinary purpose. Rotation speed suggested: 18000-24000 RPM, feed speed suggested: 8-12M/Min.

Specifications: drilling dia. 26mm; shank size: 8mm; drilling depth: 48mm; total length: 80mm. Features: tungsten carbide cutting tip with special heat treatment for sharp cutting edge, non-burrs and durable use. Used on cutting wood, MDF, fiberglass etc. Please note the cutting depth before you purchase. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits.

Arc curve design head for easy chip-removal, high hardness, more efficient perforation. How to use: suitable for bench drill, impact drill, hand held electric drill, vertical drilling machine, CNC carving machine and other drill press. Hex shank, cemented carbide cutter and solid hardened steel body. Warm tips: can not be used for cutting metal holes.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera18061100ux0584
Modela18061100ux0584

3. Meichoon

#ad

Meichoon Forstner Drill Bit Set 15-35mm 16 Pcs, Carbide Forstner Bits High Speed Steel Wood Tool Punching Bit Wood Slabs Flat Wing Drilling Hole Hinge Cemented Carbide Drilling Counterbore DC01

#ad
Meichoon #ad - High quality - small incision resistance, smooth, chip easy and no tremor. 16pcs include 16 different boring diameters: 15mm/16mm/17mm/18mm/19mm/20mm/21mm/22mm/23mm/24mm/25mm/26mm/28mm/30mm/32mm/35mm.

Wide range of applications - any wood and wood products, model production, plastic, wood processing and maintenance, installation of spherical door, plywood and other materials you need to exquisite perforation, suitable for industrial hinge installation, drawers and other occasions. Advanced technology manufacturing and durable material - Made from Tungsten steel and being hot-treated, the blade is characterized by high accuracy, smooth cutting operation, good resistance to shock and good toughness. The perforation is neat, improve the opening speed, no broken edge. Designed for durability and long life, creates a fine smooth finish.
BrandMeichoon #ad
ManufacturerMeichoon #ad
Height7 Inches
Length5 Inches
Weight1.65 Pounds
Width3 Inches
Part NumberQ-DC01

4. N\P

#ad

ISSCX 1-1/16 Inch 26mm Carbide Set Hardware Drill Bit Hole Saw Wood Cutter Alloy Steel Drilling Boring Power Rotary Cutting Tool Bits Cutter Hinge for Woodworking Plastic Door Window Punch

#ad
N\P #ad - Functional advantages: smooth opening, less burr, low working noise. Specification 1: round handle / 26mm-50g Specification 2: Hexagonal / 26mm-50g. Hole opener head: curved curve design, Conducive to chip removal, high perforation efficiency. Model:26mm-50g. Blade material: cemented carbide.
BrandN\P #ad
ManufacturerGerneric #ad
Part Number26mm-50g
Model26mm-50g

5. uxcell

#ad

Uxcell Forstner Drill Bits 26mm, Tungsten Carbide Wood Hole Saw Auger Opener, Silver Tone, Woodworking Hinge Hole Drilling Boring Bit Cutter Beige

#ad
uxcell #ad - Round shank, cemented carbide cutter and solid hardened steel body. Rotation speed suggested: 18000-24000 RPM, feed speed suggested: 8-12M/Min. Applications: can be used for drilling holes on wood and plastic products, plywood, door hinge.

Specifications: drilling dia. 26mm; shank size: 10mm; drilling depth: 52mm; total length: 85mm. Features: tungsten carbide cutting tip with special heat treatment for sharp cutting edge, non-burrs and durable use. How to use: suitable for bench drill, hand held electric drill, vertical drilling machine, impact drill, CNC carving machine and other drill press. Used on cutting wood, solid wood boards, MDF, furniture, plastics, fiberglass etc.

Forstner drill bit is for professional purpose. Warm tips: can not be used for cutting metal holes. Arc curve design head for easy chip-removal, high hardness, more efficient perforation. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits. Please note the cutting depth before you purchase.
Branduxcell #ad
Manufactureruxcell #ad
Height1.18 Inches
Length3.94 Inches
Width1.18 Inches
Part Numbera18062700ux0321

6. uxcell

#ad

Uxcell Forstner Drill Bits 26mm, Tungsten Carbide Wood Hole Saw Auger Opener Woodworking Hinge Hole Drilling Boring Bit Cutter Gray with Case

#ad
uxcell #ad - Specifications: drilling dia. 26mm; shank size: 8mm; drilling depth: 49mm; total length: 80mm. Please note the cutting depth before you purchase. Rotation speed suggested: 18000-24000 RPM, feed speed suggested: 8-12M/Min.

Round shank, cemented carbide cutter and solid hardened steel body. Features: tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits. Used on cutting wood, plastics, fiberglass etc. Warm tips: can not be used for cutting metal holes.

Arc curve design head for easy chip-removal, more efficient perforation. How to use: suitable for bench drill, hand held electric drill, impact drill, vertical drilling machine, CNC carving machine and other drill press. Applications: can be used for drilling holes on wood and plastic products, plywood, solid wood boards, furniture, MDF, door hinge.
Branduxcell #ad
Manufactureruxcell #ad
Height0.98 Inches
Length3.74 Inches
Width0.98 Inches
Part Numbera18121400ux0143

7. LepoHome

#ad

LepoHome Cone Titanium Coated Metal Hole Cutter 1/4" Hex Shank Drive Quick Change 4-12mm/4-20mm/4-32mm, 3Pcs High-Speed Steel Step Drill Bit Set

#ad
LepoHome #ad - 1/4" hex shaft drives are suitable for all kinds of for home DIY power drills. High step design let you feel the stop and never drill bigger in mistake. More capable and durable.

Widely usedperfect step drill bits suitable for drill holes in various material: within 3mm/012 inch iron plate, pvc sheet, glass, tile floors, Insulation Boards. Not suitable for hard and brittle materials such as stainless steel, Copper Plate, Aluminum Plate; within 5mm/02 inch Wood, walls etc. Materialhss combined with a titanium coating. Package included 3-piece hss groove step drill bit 4-12/ 4-20/ 4-32mm.

Easy drillingtwo-flute design for smoother cutting. Set includesbit #1 5 steps: 4-12mm 4mm, 12mm, 24mm, 28mm, 14mm, 22mm, 10mm, 20mm, 16mm, 8mm, 16mm, 6mm, 18mm, 20mm; bit #3 15 steps: 4-32mm 4mm, 10mm, 8mm, 12mm; Bit #2 9 steps: 4-20mm 4mm, 8mm, 18mm, 14mm, 10mm, 12mm, 26mm, 6mm, 30mm, 6mm, 32mm.
BrandLepoHome #ad
ManufacturerLepoHome #ad

8. uxcell

#ad

2pcs Gray, uxcell Forstner Drill Bits 26mm, Tungsten Carbide Wood Hole Saw Auger Opener, Woodworking Hinge Hole Drilling Boring Bit Cutter

#ad
uxcell #ad - Forstner drill bit is for ordinary purpose. How to use: suitable for bench drill, impact drill, vertical drilling machine, hand held electric drill, CNC carving machine and other drill press. Applications: can be used for drilling holes on wood and plastic products, MDF, furniture, plywood, door hinge.

Warm tips: can not be used for cutting metal holes. Features: tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits. Rotation speed suggested: 18000-24000 RPM, feed speed suggested: 8-12M/Min.

Used on cutting wood, solid wood boards, plastics, fiberglass etc. Specifications: drilling dia. 26mm; shank size: 8mm; drilling depth: 48mm; total length: 80mm. Round shank, cemented carbide cutter and solid hardened steel body. Arc curve design head for easy chip-removal, more efficient perforation. Please note the cutting depth before you purchase.
Branduxcell #ad
Manufactureruxcell #ad
Part NumberB07G457ZY6
Modela18061100ux0583

9. uxcell

#ad

Uxcell 2PCS 26mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain

#ad
uxcell #ad - Applications - perfect for drilling glass, ceramic tile, limestone, light stone and fiberglass. Size - 26mm1. 02-inch drilling Diameter, 8mm031-inch Shank Diameter.

Special design - slotted edge makes it more sharp, works more efficient. Nickel plated surface - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coated - diamond coating enhances the drilling speed, which makes the bit more sharp. Need to be used at a low speed; always use lubrication water when processing, porcelain, granite, ceramics, porcelain tile, marble, slate, otherwise the hole saw will burn. Side open can remove the waste to keep the drill bit clean.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera16121200ux1015
Modela16121200ux1015

10. Baban

#ad

Marble, Ceramic Tile, Carbon Steel for Glass, 6-32mm, Diamond Drill Bits, Ceramics, Porcelain, Baban 10Pcs Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating

#ad
Baban #ad - Sharp&smooth cut - coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut with no broken edges. Note - when you using the diamond drill bits, please use lubrication water, otherwise the diamond core drill will burn.

Not for use on concrete or for depths beyond about 1/2". Super material - these diamond drill bits made of high-speed steel that is durable and have a long sevice life, which are high quality and good performance that excellent for making clean and accurate hole. Ideal application - this diamond coated core drill bit removes a complete circle from glass, fiberglass porcelain tile ceramic, slate Mable, tiles, blocks jars, tile bottles, marble, ceramic or other.

They are perfect for drill glass, granite, granite light stone. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably. Satisfied size - 6mm/023", 14mm/055", 8mm/031", 22mm/086", 26mm/1. 02", 16mm/0
BrandBaban #ad
ManufacturerMoworve #ad
Height1.18 Inches
Length3.54 Inches
Weight0.02 Pounds
Width2.76 Inches
Part NumberBABAN Moworve1165