Uncategorized

Top 10 14mm Drill Bit – Brad-Point Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. Fisch

#ad

FSF-004141, Premium Drill Bits for Soft, Hard, Veneered and Laminated Wood, Easy Cutting, Fisch Brad Point Drill Bits 14mm x 160mm, Beveled Edge for Fast, Made in Austria, MDF and Acrylic Glass

#ad
Fisch #ad - Beveled edge leads to a perfect drilling of the diameter without any deviation. Made in Austria. For use in soft, exotic, hard, veneered and laminated wood as well as MDF and even acrylic glass. Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled.
BrandFisch #ad
ManufacturerAffinity Tools #ad
Height0.75 Inches
Length9.25 Inches
Weight0.21 Pounds
Width1.5 Inches
Part NumberFSF-004141
ModelFSF-004141

2. Drill America

#ad

DWDRSD14.0MM 14.00mm Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series, Drill America

#ad
Drill America #ad - When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Ideal for drilling in low and medium tensile strength materials. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
BrandDrill America #ad
ManufacturerDrill America #ad
Height0.7 Inches
Length8.75 Inches
Weight0.15 Pounds
Width1.75 Inches
Part NumberDWDRSD14.0MM
ModelDWDRSD14.0MM

3. uxcell

#ad

Uxcell Reduced Shank Drill Bit 14mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank

#ad
uxcell #ad - Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Black oxide finish - black oxide treatment adds lubricity.

Please note: to make clean and precise holes, water is required for lubrication and cooling when drilling metals. Reduced shank - expanding the size range capacity of a portable drill chuck. Increased use of water lubrication will extend drill bit life. Wide application - design for drilling in low and medium tensile strength materials, such aluminum, copper, iron, brass and metal. High speed steel tool - 14mm cutting diameter. Common flute and overall length for minimal adjustment during tool changes. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Branduxcell #ad
Manufactureruxcell #ad
Height1.57 Inches
Length5.51 Inches
Width3.94 Inches
Part Numbera18101200ux0153

4. NACX

#ad

1/2” Shank High Speed Steel Twist Drill Bit HSS-4341 for Aluminum Plate Copper Wood Stainless Steel, 14mm9/16-Inch Reduced Shank Drill Bit

#ad
NACX #ad - High speed steel type: 4341 is designed to ensure sharp and fast execution in metal material for clean results.  . Specific size: cutting bit diameter: 14mm9/16”; shank: 10mm039”; length: 150mm5. 9” length.  . Surface treatment of nitriding makes it durable, withstand heavy duty operation for long service life.  . Precision ground with geometry of 118 degree split point for quick penetration and accurate start-up.  . Suitable for drilling various materials such as die steel, aluminum, copper, l-beam, ordinary steel, channel steel, wood or 1-3mm stainless steel.
BrandNACX #ad
ManufacturerNACX #ad

5. uxcell

#ad

Uxcell Reduced Shank Twist Drill Bits 14mm High Speed Steel 4341 with 10mm Shank 1 Pcs

#ad
uxcell #ad - Versatile uses: for use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials. Reduced shank: reduced shank drill expands the size range capacity of a portable drill chuck.

Black & gold oxide finish: premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. High speed steel tool: high-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Features: cutting edge diameter : 14mm / 2. 2"; total length : 150mm / 039"; effective cutting Edge Length: 56mm / 055"; shank diameter : 10mm / 6. 0". Common flute and overall length for minimal adjustment during tool changes.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19102500ux0063

6. uxcell

#ad

Uxcell 14mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

#ad
uxcell #ad - Wide application - design for drilling in low and medium tensile strength materials, such aluminum, copper, iron, brass and metal. High speed steel tool - 14mm cutting diameter.

Black oxide finish - black oxide treatment adds lubricity. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Please note: to make clean and precise holes, water is required for lubrication and cooling when drilling metals. Small pockets on the surface of the tool that act to hold coolant near the cutting edge. Increased use of water lubrication will extend drill bit life. Common flute and overall length for minimal adjustment during tool changes. Reduced shank - expanding the size range capacity of a portable drill chuck.
Branduxcell #ad
Manufactureruxcell #ad
Height1.18 Inches
Length7.48 Inches
Width1.57 Inches
Part Numbera18103100ux0176

7. LepoHome

#ad

LepoHome Cone Titanium Coated Metal Hole Cutter 1/4" Hex Shank Drive Quick Change 4-12mm/4-20mm/4-32mm, 3Pcs High-Speed Steel Step Drill Bit Set

#ad
LepoHome #ad - Widely usedperfect step drill bits suitable for drill holes in various material: within 3mm/012 inch iron plate, Aluminum Plate; within 5mm/02 inch wood, glass, PVC sheet, Insulation Boards.

Not suitable for hard and brittle materials such as stainless steel, tile floors, Copper Plate, walls etc. More capable and durable. Set includesbit #1 5 steps: 4-12mm 4mm, 8mm, 8mm, 10mm, 18mm, 6mm, 10mm, 6mm, 12mm, 12mm, 18mm, 12mm; bit #2 9 steps: 4-20mm 4mm, 6mm, 28mm, 26mm, 30mm, 10mm, 14mm, 8mm, 24mm, 20mm; Bit #3 15 steps: 4-32mm 4mm, 14mm, 20mm, 16mm, 22mm, 16mm, 32mm. High step design let you feel the stop and never drill bigger in mistake. 1/4" hex shaft drives are suitable for all kinds of for home DIY power drills. Easy drillingtwo-flute design for smoother cutting. Package included 3-piece hss groove step drill bit 4-12/ 4-20/ 4-32mm. Materialhss combined with a titanium coating.
BrandLepoHome #ad
ManufacturerLepoHome #ad

8. uxcell

#ad

Uxcell 5Pcs 14mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain

#ad
uxcell #ad - Size - 14mm9/16-inch drilling Diameter, 6. 5mm025-inch Shank Diameter. Need to be used at a low speed; Always use lubrication water when processing, porcelain, slate, otherwise the hole saw will burn.

Nickel plated surface - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Special design - slotted edges make it more sharp, work more efficient. Diamond coated - diamond coating enhances the drilling speed, which makes the bit more sharp. Applications - perfect for drilling glass, limestone, ceramic tile, marble, porcelain tile, ceramics, granite, light stone and fiberglass. Side open can remove the waste to keep the drill bit clean.
Branduxcell #ad
Manufactureruxcell #ad
Height0.79 Inches
Length5.51 Inches
Width3.94 Inches
Part Numbera16121200ux1003
Modela16121200ux1003

9. uxcell

#ad

Uxcell Reduced Shank Drill Bit 14mm High Speed Steel HSS 4241 with 1/2 Inch Straight Shank

#ad
uxcell #ad - Increased use of water lubrication will extend drill bit life. Common flute and overall length for minimal adjustment during tool changes. Please note: to make clean and precise holes, water is required for lubrication and cooling when drilling metals.

Polished finish - polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Wide application - design for drilling in low and medium tensile strength materials, copper, iron, such aluminum, brass and metal. Reduced shank - expanding the size range capacity of a portable drill chuck. High speed steel tool - 14mm cutting diameter.
Branduxcell #ad
Manufactureruxcell #ad
Height0.79 Inches
Length6.89 Inches
Width0.98 Inches
Part Numbera19010500ux0059

10. QLOUNI

#ad

QLOUNI 5Pcs 228mm/9" Extra Long Drill Bit Imperial 6/8/10/12/14mm Hex Shank Brad Point Augers Drill Bits

#ad
QLOUNI #ad - Auger wood drill bit set: tough, sharp, well made, creates deep, clean holes quickly and cleanly in hard or soft wood. Shank type: hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.

Package included: 5 pcs long hexagon shank augers woodworking drill bit, apply to: Wood, Plastic and Aluminum Alloy Material. Titanium coated hss: classic high speed steel construction with titanium coating for proven capability and durability. Imperial wood bit: 6/8/10/12/14mm brad point set, simple, 200mm/9" extra long drill bits. The top of the tooth head is a guide function, so that the drilling is accurate, quick and easy.
BrandQLOUNI #ad
ManufacturerQLOUNI #ad