Uncategorized

Top 10 10×4 Ceiling Register – Registers, Grilles & Vents

As an Amazon Associate I earn from qualifying purchases.

1. Accord Ventilation

#ad

White, Accord ABSWWH2104 Sidewall/Ceiling Register with 2-Way Design, 10-Inch x 4-InchDuct Opening Measurements

#ad
Accord Ventilation #ad - The number of louvered columns and mounting holes will vary based on the size of the grille ordered. Listed product sizes refer to the duct opening measurements, not the register itself. Two-way air deflection with a multi-shutter damper. Steel construction for sidewall or ceiling application. 1/2-in spaced fins.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.35 Inches
Length11.6 Inches
Weight0.82 Pounds
Width5.7 Inches
Part NumberABSWWH2104
ModelABSWWH2104

2. EZ-FLO

#ad

EZ-FLO 61609, 10 inch W x 4 inch H Opening, White Two-Way Sidewall/Ceiling Register, 10" x 4"

#ad
EZ-FLO #ad - Designed for use in both sidewall and ceiling locations. The register features a powder-coated white finish that resists flaking, scratching and fading. Constructed of heavy-duty steel that provides strength and durability. The two-way sidewall/ceiling register measures 11-3/4 inch x 5-3/4 inch with a duct opening of 10 inch x 4 inch. The steel register has a two-way air deflection to allow a better flow of air.
BrandEZ-FLO #ad
ManufacturerEZ-FLO #ad
Height1 Inches
Length11.75 Inches
Weight1 Pounds
Width5.75 Inches
Part Number61609
Model61609
Warranty1 year limited lifetime

3. Accord Ventilation

#ad

White, Accord Ventilation ABSWWHA104 Sidewall/Ceiling Register, 10 Inch x 4 Inch

#ad
Accord Ventilation #ad - For sidewall or Ceiling application. Multi-shutter damper. Steel construction. Individually adjustable blades. White durable finish.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.34 Inches
Length11.5 Inches
Weight0.8 Pounds
Width5.63 Inches
Part NumberABSWWHA104
ModelABSWWHA104
WarrantyLifetime Limited Warranty

4. HBW

#ad

Actual Outside Dimension 11.75" X 5.75", HBW 10"x 4" Duct Opening Size 3-Way Stamped Face Steel Ceiling/sidewall Air Supply Register, Vent Cover

#ad
HBW #ad - Multi-shutter damper with easy handle to adjust desired amount of air flow. The listed size 10"x 4" is for inside duct opening measurement, actual outside dimension is 11. 75" x 5. 75". Three way air Flow deflection Design. Individually shrink wrapped with card board pad in the back for extra protection. Stamped face steel construction with 1/2" fin spacing for high air flow.
BrandHBW #ad
ManufacturerHBW #ad
Height1.5 Inches
Length11.75 Inches
Width5.75 Inches

5. Truaire

#ad

Truaire C103M 10X04Duct Opening Measurements 3-Way Supply 10 4-Inch Sidewall or Ceiling Register Grille, Inch x 4-Inch, White-Powder Coated

#ad
Truaire #ad - High quality powder coated. Model size indicates Duct Opening Measurements not Wall Opening Measurements. Smoothglide damper. High quality steel components, no plastic. The actual face size is 11. 75-inch in width and 5. 75-inch in height.
BrandTruaire #ad
ManufacturerTru Aire #ad
Height8 Inches
Length15 Inches
Width8 Inches
Part NumberC103M 10X04
ModelC103M 10X04

6. Metal-Fab/Air-Craft

#ad

HVAC Vent Cover Sidewall or Ceiling, High Airflow, White Outer Dimensions: 11.75"w X 5.75"h, 10"w x 4"h Adjustable AIR Supply Diffuser, Grille Register

#ad
Metal-Fab/Air-Craft #ad - Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. Louvered adjustable register grille for sidewall or ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components.

High quality steel construction, 2 recessed screw holes on each side with screws Included, Shiny, No Sharp Edges, scratch-resistant, Screws Same Color As Vent Cover, No Scuff Powder Coat Durable Finish, Smooth, EASY INSTALLATION.11

10"w x 4"h is the size for the duct opening measurement only actual front end frame outer dimensions are 11. 75"w x 5. 75"h - see below in description how to measure a grillE. Each individual fin is adjustable for max airflow control – adjust the fins to open or close from the Front - Easy Unrestricted Air Flow Deflection For Your HVAC System.
BrandMetal-Fab/Air-Craft #ad
ManufacturerMetal-Fab/Air-Craft #ad
Weight0.9 Pounds
Part NumberMFASCA104W
ModelCECOMINOD067287
Warrantymanufacturer

7. HVAC Premium

#ad

HVAC Vent Cover Sidewall or Ceiling, Black Outer Dimensions: 11.75"w X 5.75"h, Grille Register, 10" X 4" Adjustable AIR Supply Diffuser, High Airflow

#ad
HVAC Premium #ad - 10"w x 4"h is the size for the duct opening measurement only actual front end frame outer dimensions are 11. 75"w x 5. 75"h - see below in description how to measure a grillE. Louvered adjustable register grille for sidewall or ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components.

Each individual fin is adjustable for max airflow control – adjust the fins to open or close from the Front - Easy Unrestricted Air Flow Deflection For Your HVAC System. Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality.

High quality steel construction, no sharp edges, no scuff powder coat durable finish, Screws Same Color As Vent Cover, 2 recessed screw holes on each Side with Screws Included, Shiny, scratch-resistant, smooth, EASY INSTALLATION.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Height4 Inches
Length1 Inches
Width10 Inches
Part NumberSV104 Black HP
Warrantymanufacturer

8. Imperial

#ad

Register Ceiling 4x10in White

#ad
Imperial #ad - Item package width: 4. 9999999949". Item package height: 1. 299999998674". Item package length: 1099999998878". Model number: RG0133.
BrandImperial #ad
ManufacturerImperial Manufacturing #ad
Height6 Inches
Length7 Inches
Width3 Inches
Part NumberRG0133
ModelRG0133

9. Truaire

#ad

Truaire 103M 10X04 3-Way Supply 10-Inch x 4-Inch Sidewall or Ceiling Register Grille, White

#ad
Truaire #ad - Smoothglide damper. Heavy gage all steel construction. High quality steel components, no plastic. For heating or cooling applications. High quality powder coated.
BrandTruaire #ad
ManufacturerTru Aire #ad
Height5.75 Inches
Length1.5 Inches
Weight1.1 Pounds
Width11.75 Inches
Part Number103M/10x04
Model103M 10X04

10. Decor Grates

#ad

Gun Metal, Decor Grates AJH410-GM Oriental Floor Register, 4x10

#ad
Decor Grates #ad - Filter retainer and filter are sold separately. Oriental design steel plated - Gun Metal finish floor register. Easy to install - Just drop into vent - no tools required.

Useful tip: because of increased floor cleaning during this pandemic, we recommend removing your steel floor registers before cleaning your floor The floor registers can simply be cleaned using a dry cloth Frequent exposure to water and cleaning detergents will accelerate the rusting process. Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic This is not a cheaper option, it’s the best option. Available in a variety of styles and finishes to match any decor.
BrandDecor Grates #ad
ManufacturerDécor Grates #ad
Height1.4 Inches
Length11.5 Inches
Width5.25 Inches
Part NumberAJH410-GM
ModelAJH410-GM
WarrantyLimited 12 month Warranty