Tools & Home Improvement

Taytools 6″ Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8″, 1/16″, 1/32″ and 1/64″ MRSAE


Taylor Toolworks LLC - Blade is. 040" thick and 1" wide. Made from hardened spring steel. Rigid blade is 6" long,. 040" thick and 1" wide. Rule is precision photo etched and black filled for long life and easy readability. Both sides of the blade are ground parallel and straight. Brushed finish. Rule is precision photo etched and black filled for long life and easy readability.

. Brushed finish. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other side. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other. Rigid machinist rule made from hardened spring steel.

More information about Taylor Toolworks LLC

Taytools 12" Rigid Machinist Rule Ruler Hardened Spring Steel 4R Graduations in 1/8", 1/16", 1/32" and 1/64" MRSAE-12


Taylor Toolworks LLC - Made from hardened spring steel. Rigid blade is 12" long,. 040" thick and 1" wide. Rigid machinist rule made from hardened spring steel. Both sides of the blade are ground parallel and straight. Rule is precision photo etched and black filled for long life and easy readability. Rule is precision photo etched and black filled for long life and easy readability.

Blade is. 040" thick and 1" wide. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other side. Brushed finish. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other. Brushed finish.

More information about Taylor Toolworks LLC


Similar products



eBoot 2 Pack Stainless Steel Ruler Machinist Engineer Ruler, Metric Ruler with Markings 1/8, 1/16, 1/32, 1/64 Inch for Engineering, School, Office, Architect, and Drawing 6 Inch


eBoot - Double-face graduation: graduation on each side is precision; 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the other side. 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the reverse side. Clear engraved markings:  markings are engraved onto the ruler so they will not rub off over time; And the clear marks on stainless steel is helpful for your convenient measurement.

Common application:  Precision stainless steel rulers are handy for a variety of applications. This precision ruler is made of durable stainless steel for your long lasting use. Package includes: 2 x Stainless steel ruler 6 inch Made from hardened spring steel. Rigid blade is 12" long,. 040" thick and 1" wide.

eBoot 2 Pack Stainless Steel Ruler Machinist Engineer Ruler, Metric Ruler with Markings 1/8, 1/16, 1/32, 1/64 Inch for Engineering, School, Office, Architect, and Drawing 6 Inch - Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement. Brushed finish. Rule is precision photo etched and black filled for long life and easy readability. 2 pack stainless steel office ruler:  Marked maximum measuring length is up to 6 inches.

Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, drawing, school, engineering and other tasks.

More information about eBoot


Similar products



PEC Tools 6" 5R flexible black chrome, "High Contrast" machinist ruler with markings 1/10", 1/100", 1/32" and 1/64"


Products Engineering Corporation PEC Tools 501-06EZ - 5r markings with 1/10", 1/100" and quick-reading 1/32" and 1/64". Rule is precision photo etched and black filled for long life and easy readability. It has a "high- contrast" black chrome finish that provides better rust resistance than polished steel and can be easily read in both low and bright light conditions.

Durable ruler: maximum measuring length is up to 6 inches; Quantity: 2 x rulers, which are made of sturdy stainless steel for your long lasting use. Rule is made from spring tempered and hardened steel and is. 500" wide by. 020" thick. 100% made in usa by pec Tools Products Engineering Company. Clear engraved markings: markings are engraved onto the ruler so they will not rub off over time; Clear marks provide accurate measurement.

PEC Tools 6" 5R flexible black chrome, "High Contrast" machinist ruler with markings 1/10", 1/100", 1/32" and 1/64" - . 6" flexible rule is. 500" wide and. 020" thick. The sides of each rule are ground parallel and each end is accurately ground square to allow reading from either end. High-contrast" easy to read black chrome finish. Graduations are precision photo etched and then white filled for easy readability.

More information about Products Engineering Corporation PEC Tools 501-06EZ


Similar products



PEC Tools 6" 4R rigid black chrome, "high-contrast" machinist ruler with markings 1/8", 1/16", 1/32" and 1/64"


PEC Tools Products Engineering Company - This precision 6" 4r rigid ruler is made in the USA by Products Engineering Company PEC Tools, a premier tool manufacturer. Rule is made from spring tempered and hardened steel and is. 750" wide by. 036" thick. It has a "high-contrast" black chrome finish that provides better rust resistance than polished steel and can be easily read in both low and bright light conditions.

The sides of each rule are ground parallel and each end is accurately ground square to allow reading from either end. 4r graduations have 1/8" and 1/16" on one side and quick-reading 1/32" and 1/64" on the other. It has a "high-contrast" black chrome finish that provides better rust resistance than polished steel and can be easily read in both low and bright light conditions.

PEC Tools 6" 4R rigid black chrome, "high-contrast" machinist ruler with markings 1/8", 1/16", 1/32" and 1/64" - 5r markings with 1/10", 1/100" and quick-reading 1/32" and 1/64". Made from hardened spring steel. Rigid blade is 12" long,. 040" thick and 1" wide. 6" flexible rule is. 500" wide and. 020" thick. Rule is made from spring tempered and hardened steel and is.

More information about PEC Tools Products Engineering Company


Similar products



General Tools 300/1 6-Inch Flex Precision Stainless Steel Rule


General Tools 300/1 - Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, school, drawing, engineering and other tasks. Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision.

The width is 15/32". Work smarter, measure better & be more productive with general tools made from hardened spring steel. Rigid blade is 12" long,. 040" thick and 1" wide. Sides ground parallel and ends are accurately ground square to allow readings from both ends. Offering over 1, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, 000 tools, specific-purpose mechanical hand tools and precision measuring and inspection tools.

General Tools 300/1 6-Inch Flex Precision Stainless Steel Rule - Etched black graduations for simple readings. Stainless steel rule has etched black graduations for easy reading and long life. Brushed finish. 6" flexible rule is. 500" wide and. 020" thick. In addition, several of our economy Steel Rulers Are Equipped With Pocket Clips For Use In The Field.

More information about General Tools 300/1


Similar products



General Tools 380B Two-Point Scriber


General Tools & Instruments 380B - 6" flexible rule is. 500" wide and. 020" thick. Brushed finish. Sides ground parallel and ends are accurately ground square to allow readings from both ends. Etched black graduations for simple readings. We strive to provide our customers with 100% satisfaction. Use the straight point to mark bend lines for an air conditioning duct, or flip the tool around and use the 90 degree bend to remove an O-ring from a piece of equipment.

General tools - the precise tool for doing the job exACTLY RIGHT. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other. Offering over 1, 000 tools, craftsmen and diyers around the world with a broad range of affordable, we’re proud to provide tradesmen, specific-purpose mechanical hand tools and precision measuring and inspection tools.

General Tools 380B Two-Point Scriber - Practical uses: precision stainless steel ruler is handy to use as drawing straight edge or measuring device; Good for office, drawing, school, engineering and other tasks. Warm notice: the ruler has squared off angles, please pay attention to it avoid scratching your hand; Children use under adult supervision.

Graduations on side 1 are in 32nds and 64ths. Overall length - 8-7/8 inches. On side 2 is a decimal equivalents chart. Double-face graduation: graduation on each side is precision; 1/ 64 inches and 1/ 32 inches gradations on one side; 1/ 16 inches and 1/ 8 inches graduation on the other side.

More information about General Tools & Instruments 380B


Similar products



Hotop 32 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool


Hotop - Rule is precision photo etched and black filled for long life and easy readability. 6" flexible rule is. 500" wide and. 020" thick. This scriber consists of short straight and short 90 degree bent steel removable points which thread into knurled body. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other.

32 different imperial sizes inch: 00015, 0002, 00025, 0003, 0004, 0005, 0006, 0007, 0008, 0009, 0010, 0010, 0011, 0012, 0013, 0014, 0015, 0016, 0017, 0

More information about Hotop


Similar products



General Tools 88CM Tungsten Carbide Scribe and Magnet


General Tools 88CM - This product is highly durable. Engraving pen comes with a chuck for reversing tungsten carbide point when not in use; scribe is an essential machining tool. Aluminum knurled body, with three interchangeable threaded steel points; short straight, short bent and long bent. We strive to provide our customers with 100% satisfaction.

The width is 15/32". Offering over 1, we’re proud to provide tradesmen, 000 tools, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. Tungsten Carbide Scriber & Magnet. This scriber consists of short straight and short 90 degree bent steel removable points which thread into knurled body.

General Tools 88CM Tungsten Carbide Scribe and Magnet - 15/32" width. The tungsten carbide tip performs flawlessly on even the hardest metals, and therefore works easily on ceramics and glass as well. For inquiries, please contact our Customer Service Department at 212-431-6100 Graduations on side 1 are in 32nds and 64ths. This precision 6" 4r rigid ruler is made in the USA by Products Engineering Company PEC Tools, a premier tool manufacturer.

Rule is made from spring tempered and hardened steel and is. 750" wide by.

More information about General Tools 88CM


Similar products



Zhehao 4 Pieces Magnetic Pick-Up Grabber Tool with LED Light including 10 lb/ 1 lb Pick-Up Rod and Round/Square Inspection Mirror, Telescoping Handle 360 Swivel for Extra Viewing Pickup Dead Angle


Zhehao - Scribe tool point is replaceable; convenient pocket-clip allows you to always keep the tool handy. Graduations on side 1 are in 32nds and 64ths. High-contrast" easy to read black chrome finish. Permanent magnet on the etching tool picks up small parts and retrieves steel chips from hard-to-reach places. Package includes: 1 piece 8 lb magnetic pick up tool, 1 piece 1 lb magnetic pick up tool, 1 round shaped inspection mirror and 1 square shaped inspection mirror, totally 4 pieces.

Telescoping handle and 360 swivel adjustable: 8 lb pick-up tool can be telescoped from 7. 48 to 309 inch, while the square one is 11 to 34. 25 inch, while the 1 lb one is 4. 5 to 19. 5 inch; the round shaped inspection mirror can be telescoped from 9. 44 to 29 inch, 360 swivel adjustable. Equipped with led lights: the 8 lb pick up tool and the square inspection mirror come with LED lights, convenient for pickup or inspection.

Zhehao 4 Pieces Magnetic Pick-Up Grabber Tool with LED Light including 10 lb/ 1 lb Pick-Up Rod and Round/Square Inspection Mirror, Telescoping Handle 360 Swivel for Extra Viewing Pickup Dead Angle - 8 lb pick up tool and square inspection mirror come with LED light. Tungsten Carbide Scriber & Magnet. 360 swivel adjustable for extra viewing pickup dead angle, line of sight obstacle area.

More information about Zhehao


Similar products



Brown & Sharpe 599-792-2 Edge Finder Single, 3/8" Shank x 0.200" Head Diameter


Hexagon Metrology 599-792-2 - Edge finders are used to accurately locate the edge of rotating work surfaces up to 1, 000 RPM. Stainless steel rule has etched black graduations for easy reading and long life. Single-end usability. This product is highly durable. This precision 6" 4r rigid ruler is made in the USA by Products Engineering Company PEC Tools, a premier tool manufacturer.

Rule is made from spring tempered and hardened steel and is. 750" wide by. 036" thick. It has a "high-contrast" black chrome finish that provides better rust resistance than polished steel and can be easily read in both low and bright light conditions. The sides of each rule are ground parallel and each end is accurately ground square to allow reading from either end.

4r graduations have 1/8" and 1/16" on one side and quick-reading 1/32" and 1/64" on the other. Brown & sharpe has manufacturing facilities in North America, Switzerland, and China. Place in a standard 1/2” diameter collet or chuck to use, and as it rotates and approaches the work edge, the head moves sideways approximately 1/32”.

Brown & Sharpe 599-792-2 Edge Finder Single, 3/8" Shank x 0.200" Head Diameter - Single-end usability allows use on one end of the instrument. Graduated with quick reading 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other. Brown & sharpe was founded in 1833, had a major part in setting industrial standards in the United States, including a tool spindle taper, and has given its name to several standards, a worm threadform, and others.

More information about Hexagon Metrology 599-792-2


Similar products