Electronics

SunFounder Mifare RC522 Card Read Antenna RF Module RFID Reader IC Card Proximity Module for Arduino

#ad
#ad
SunFounder #ad - Introduction rfid module the original philips mfrc522 chip design circuit card reader is easy to use and low cost, the reader and the development of advanced applications, and applies to the user equipment development, and the need for the user RF card terminal design/production. It utilizes a voltage of 3.

SunFounder Mifare RC522 Card Read Antenna RF Module RFID Reader IC Card Proximity Module for Arduino #ad - 3v, through the SPI interface with simply a few wires. For more information, refer to https://www. Sunfounder. Com/wiki/index. Php?title=mifare_rc522_module_rfid_reader Specifications Operating current: 13-26mA/DC 3. 3v idle current: 10-13mA/ DC 3. 3v sleep current:. This module can be directly loaded into various reader modules.

Directly connected with a CPU motherboard, the module can work in a stable and reliable manner as a distance card reader.

More information about SunFounder #ad

HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

#ad
#ad
HiLetgo® NA #ad - 5. Communication between it and the host SPI mode helps to reduce the connection, reduce PCB board size and cost. Rc522 chip 1. Electrical parameters: Operating current :13-26mA/DC 3. 3v idle current :10-13mA/DC 3. 3v sleep current:. Mf rc522 completely integrated in all types of 13. 56mhz passive contactless communication methods and protocols.

Mfrc522 is a highly integrated read and write chip which is applicable to 13. 56mhz contactless communications. In addition, support fast CRYPTO1 encryption algorithms, terminology validation MIFARE products. The digital part handles ISO14443A framing and error detection. As a highly integrated 13. 56mhz card reader new family of chips, mf rc500 and MF RC530, there are many similarities between MF RC522, but also have many differences.

HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi #ad - 3. 4. 6. Mfrc522 support mifare series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. Support 14443A compatible transponder signals. 2.

More information about HiLetgo® NA #ad


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
#ad
Elegoo EL-CP-004 #ad - Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc.

Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. The module use a voltage of 3. 3v, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.

Each cable length: about 20 cm /8-inch. So we can control the quality of our productions by ourselves for you. We’d like to receive your valuable suggestions for our products and make your idea come true. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - We have the manufacture factory, making productions and selling by ourselves. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Packing in a color box. We have always cared about the customer experience and improve the product function details.

More information about Elegoo EL-CP-004 #ad


Similar products



Gowoops RFID Kit - RF IC Card Sensor Module and S50 Blank Card and Key Ring for Arduino Raspberry Pi

#ad
#ad
Gowoops #ad - Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Packing in a color box. We have always cared about the customer experience and improve the product function details. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

Gowoops RFID Kit - RF IC Card Sensor Module and S50 Blank Card and Key Ring for Arduino Raspberry Pi #ad - The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds.

The module use a voltage of 3. 3v, it can ensure stable and reliable work, it can connected communication with user's any CPU mainboard through several lines of SPI interface, and reader distance. Each cable length: about 20 cm /8-inch.

More information about Gowoops #ad


Similar products



YARONGTECH-50pcs MIFARE Classic 1K Dia 25mm adhesive RFID Sticker NFC tag

#ad
#ad
YARONG #ad - The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds.

The module use a voltage of 3. 3v, it can ensure stable and reliable work, it can connected communication with user's any CPU mainboard through several lines of SPI interface, and reader distance. Each cable length: about 20 cm /8-inch. 5. Blank paper finished. 13. 56mhz tag. Mifare classic 1k label. 4. With adhesive back.

YARONGTECH-50pcs MIFARE Classic 1K Dia 25mm adhesive RFID Sticker NFC tag #ad - The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Mifare classic 1k tag.

Packing in a color box.

More information about YARONG #ad


Similar products



ARDUINO UNO R3 A000066

#ad
#ad
ARDUINO A000066 #ad - It has 14 digital input/output pins of which 6 can be used as PWM outputs, a USB connection, a power jack, a 16 MHz quartz crystal, 6 analog inputs, an ICSP header and a reset button. Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.

. 13. 56mhz tag. Packing in a color box. We have always cared about the customer experience and improve the product function details. Arduino uno is the most used and documented board in the world. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

ARDUINO UNO R3 A000066 #ad - Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1. 0, now evolved to newer releases. Mifare classic 1k label. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.

Mifare classic 1k tag. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Mifare classic 1k sticker.

More information about ARDUINO A000066 #ad


Similar products



SunFounder PN532 NFC RFID Module Kit Reader Writer with Key Tag for Arduino Android

#ad
#ad
SunFounder #ad - Mifare classic sticker. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.

13. 56mhz tag. With the mode switch on board, spi, you can change easily between I2C, and UART modes - UART and I2C modes share the same port. The integrated 3. 3v voltage regulator provides 3. 3v or 5v working voltage for your choice. It has 14 digital input/output pins of which 6 can be used as PWM outputs, a USB connection, a 16 MHz quartz crystal, a power jack, 6 analog inputs, an ICSP header and a reset button.

SunFounder PN532 NFC RFID Module Kit Reader Writer with Key Tag for Arduino Android #ad - Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users. Mifare classic 1k label. Arduino uno is the most used and documented board in the world. Introduction sunfounder pn532 nfc rfid Module is a highly integrated transmission module for Near Field Communication at 13.

More information about SunFounder #ad


Similar products



HiLetgo PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone Android Phone

#ad
#ad
HiLetgo 3-01-1147 #ad - Mifare classic 1k sticker. Support rfid reading and writing SupportP2P communication with peers Support NFC with Android phone 3. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Mifare classic 1k label. Important: before getting it start, pn532 libraryseeed-studio's version recommanded, you need to install a few libraries like Don's NDEF library, both of them you can find on GitHub or at below links: Arduino Library for NFC Shield based on NXP PN532 chip: https://github.

Com/jmgjmg/pn532 arduino library for spi and I2C access to the PN532 RFID: https://github. Com/adafruit/adafruit-pn532 driver for PN532 NFC chip: https://github. Com/techniq/node-pn532 Description: 1. Arduino uno is the most used and documented board in the world. Mifare classic sticker. Rfid reader/writer supports: mifare 1k, p5cn072 smx, cd light, 4k, and desfire cards, desfire, iso/IEC 14443-4 cards such as CD97BX, innovision jewel cards such as irt5001 card, Ultralight, FeliCa cards such as RCS_860 and RCS_854.

HiLetgo PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone Android Phone #ad - Plug and play, Arduino compatible 8. Gilt pcb and small dimension and easy to embed into your project 2. Exchange data with other nfc devices such as smartphone package incuded: 1*NXP PN532 NFC RFID Module V3 Kit The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip.

More information about HiLetgo 3-01-1147 #ad


Similar products



AGPtek 60kg 130LBs Holding Force Electric Magnetic Lock for Door Access Control System Electromagnet Fail-Safe NC Mode

#ad
#ad
MamBate 57181 #ad - Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. The maglock is installed beneath the top of the door frame to make sure that the door remains closed and locked. Mifare classic sticker. It is built in voltage spike suppressor, Opening Mode: 90 degree swinging door.

Wide applications - agptek magnetic door lock is suitable for Wooden Door, Glass Door, Metal Door, Fire Proof Door, etc. Note - before purchasing, it is recommended that the customer checks with their local fire authority to see if there is any additional product they may need in order to comply with the local fire codes.

13. 56mhz tag. Rfid reader/writer supports: mifare 1k, cd light, p5cn072 smx, innovision jewel cards such as irt5001 card, 4k, and DesFire cards, ISO/IEC 14443-4 cards such as CD97BX, Ultralight, desfire, FeliCa cards such as RCS_860 and RCS_854. Get secured - agptek magnetic door lock provides a strong sense of security with its outstanding holding force and significant features.

AGPtek 60kg 130LBs Holding Force Electric Magnetic Lock for Door Access Control System Electromagnet Fail-Safe NC Mode #ad - Package include: 1x magnetic door lock main body 60kg strong forcenc mode 1x Armature faceplate 1x package Mounting hardware kit 1x Manual The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc.

Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds.

More information about MamBate 57181 #ad


Similar products



Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino

#ad
#ad
Elegoo EL-CB-001 #ad - The maglock is installed beneath the top of the door frame to make sure that the door remains closed and locked. Features * atmega328p microcontroller * input voltage - 7-12V * 5V Electric current: 500MA * 3. 3v electric current: 50ma * 14 digital i/o pins 6 pwm outputs * 8 analog inputs * 32k Flash Memory * 16Mhz Clock Speed Component listing: 1pcs UNO R3 Development Board 1pcs USB cable.

Mifare classic 1k tag. Support i2c, spi and hsu high speed UART, easy to change among these modes. It is built in voltage spike suppressor, Opening Mode: 90 degree swinging door. Arduino uno is the most used and documented board in the world. This door lock and its user-friendly design will have you secured and protected very soon!

Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino #ad - 13. 56mhz tag. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds.

The module use a voltage of 3.

More information about Elegoo EL-CB-001 #ad


Similar products



Diymall 0.96" Inch Blue and Yellow I2c IIC Serial Oled LCD LED Module 12864 128X64 for Arduino Display Raspberry PI 51 Msp420 Stim32 SCR

#ad
#ad
DIYmall #ad - It is built in voltage spike suppressor, Opening Mode: 90 degree swinging door. And if you are not sure about any part of the instructions, please consult a qualified elecirician. New improvement: clearly printed on the female header connector, more precise and easier to use the wire. Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1.

0, now evolved to newer releases. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. The iic address can be changed, it is convenient to use with different machines. Document link:https://drive. Google. Com/open?id=1qkexpet5muicAarGOtlnQk4F-JEKkrHZ.

Diymall 0.96" Inch Blue and Yellow I2c IIC Serial Oled LCD LED Module 12864 128X64 for Arduino Display Raspberry PI 51 Msp420 Stim32 SCR #ad - 13. 56mhz tag. Mifare classic 1k tag. Warranty: one year warranty, any question please feel free to contact 2pcs link https://www. Amazon. Com/dp/b01hebIJKK.

More information about DIYmall #ad


Similar products