Industrial & Scientific

Filabot TCBL1 Taulman Clear t-glase Filament, 1.75 mm, Black

#ad
#ad
Taulman TCBL1 #ad - Prints on Un-heated Bed. Black. Prints at slightly lower than ABS temps and sticks exceptionally well to even un-heated surfaces. Taulman t-glase tee glass is a pETT filament that is perfectly clear, with super low shrink properties and a very strong part when finished. 225ºc. 1. 75mm. This filament can be used on printers that do not have a headed bed.

More information about Taulman TCBL1 #ad

Smooth-On XTC-3D High Performance 3D Print Coating - 24oz. Unit

#ad
#ad
Smooth-On, Inc. #ad - Keep out of the Reach of Children. Inexpensive to use - 1 oz covers 100+ square inches. The need to post finish is almost eliminated. Coat any 3d print surface - xtc-3d® can be applied to both SLA and SLS prints. It also can be used to coat eps, plaster, fabric, EPDM and urethane foam as well as wood, cardboard and paper.

It also can be used to coat eps, aBS, EPDM and urethane foam as well as wood, cardboard and paper. Xtc-3d® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Smooths 3D Printed Objects. Two liquids are mixed together and brushed onto any 3D print.

Smooth-On XTC-3D High Performance 3D Print Coating - 24oz. Unit #ad - . Compatible with SLA and SLS prints. It works with pla, fabric, laywoo, plaster, powder printed parts and other rigid media. Xtc-3d® is a protective coating for smoothing and finishing 3D printed parts. Working time is 10 minutes and cure time is about 4 hours depending on mass and temperature. Xtc-3d® does not contain VOC's, phthalates or phosphates.

Coating self-levels and wets out uniformly without leaving brush strokes. 90% time & labor savings: xtc-3d® fills in 3D print striations and creates a smooth, high gloss finish.

More information about Smooth-On, Inc. #ad


Similar products



HATCHBOX 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1.75 mm, 1 kg Spool, Wood

#ad
#ad
HATCHBOX 3D WOOD-1KG1.75 #ad - It also can be used to coat eps, ePDM and urethane foam as well as wood, ABS, cardboard and paper.1kg 2. 2 lb Spool. Compatible with SLA and SLS prints. It works with pla, laywoo, fabric, plaster, powder printed parts and other rigid media. The 3d printed object will have a wood finish with HATCHBOX's Wood filament.

Why we love it: less warping Easy to use No heated bed required. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Recommended extrusion/nozzle temperature 175°C - 220°C 347°F - 428°F. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

HATCHBOX 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1.75 mm, 1 kg Spool, Wood #ad - Blending a mixture of plant-based materials, and wood particles creates HATHCHBOX 3D Printer's Wood PLA Hybrid, polymers, making this material more earth- friendly. Wood 3d printer Filament Vacuumed Sealed With Desiccant. Epoxy coating for 3D Printed Objects. You'll be able to sand and stain the finish product if you wish.

The filaments are universally designed and compatible with 3D Printers using 1.

More information about HATCHBOX 3D WOOD-1KG1.75 #ad


Similar products



AmazonBasics PETG 3D Printer Filament, 1.75mm, Black, 1 kg Spool

#ad
#ad
AmazonBasics AMG1051752-10 #ad - Compatible with SLA and SLS prints. It works with pla, fabric, plaster, laywoo, powder printed parts and other rigid media. Epoxy coating for 3D Printed Objects. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Made of petg plastic, stiffness, known for its ease of use like PLA and durable strength like ABS; no heating bed needed; offers easy bed adhesion, and a glossy type finish.

Spool's built-in gauge shows percentage of material remaining and approximate length remaining. 3d printer filament with 1. 75 mm diameter + / -. 05 mm; designed to fit most common 3D printers check spool size for compatibility; Black; 1 kg spool. Smooths 3D Printed Objects. Engineered to reduce jamming; resealable storage bag included to protect filament between use.

AmazonBasics PETG 3D Printer Filament, 1.75mm, Black, 1 kg Spool #ad - It also can be used to coat eps, ePDM and urethane foam as well as wood, ABS, cardboard and paper.1kg 2. 2 lb Spool. Measures 9. 2 by 8.

More information about AmazonBasics AMG1051752-10 #ad


Similar products



Filabot 910175 Taulman 910 Alloy, 1.75" Filament Diameter, Natural

#ad
#ad
Taulman 3D 910175 #ad - Tensile strength = 8, 100PSI +. Printable at 245° C. According to taulman, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance, the durability of Nylons, the material has “a combined tensile strength higher than the strongest co-polyesters, and a 95° C working range. At the same time, it’s designed to be used with relative ease.

Filabot 910175 Taulman 910 Alloy, 1.75" Filament Diameter, Natural #ad - Made of petg plastic, stiffness, known for its ease of use like PLA and durable strength like ABS; no heating bed needed; offers easy bed adhesion, and a glossy type finish. Spool's built-in gauge shows percentage of material remaining and approximate length remaining. 1. 75mm filament diameter Dimensional Accuracy +/- 0

03mm. Wood 3d printer Filament Vacuumed Sealed With Desiccant. Smooths 3D Printed Objects. Epoxy coating for 3D Printed Objects. Print bed / cold = buildtak with coat of PVA Hot = Glass heated to 45C with coat of PVA. Measures 9. 2 by 8.

More information about Taulman 3D 910175 #ad


Similar products



NinjaFlex TPU 3D Printing Filament - MIDNIGHT - 1.75mm .50kg

#ad
#ad
Fenner Drives 3D3011175 #ad - The result is uniquely flexible, strong prints ideal for direct-drive extruders. Recommended extrusion/nozzle temperature 175°C - 220°C 347°F - 428°F. Smooths 3D Printed Objects. Ninjaflex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials.

1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Made from a specially formulated thermoplastic polyurethane TPU material, this patented technology boasts a low-tack, easy-to-feed texture. It also can be used to coat eps, aBS, EPDM and urethane foam as well as wood, cardboard and paper.1kg 2. 2 lb Spool.

NinjaFlex TPU 3D Printing Filament - MIDNIGHT - 1.75mm .50kg #ad - Suggested applications: Seals, plugs, leveling feet, gaskets, protective applications. Excellent vibration reduction. Made of petg plastic, stiffness, known for its ease of use like PLA and durable strength like ABS; no heating bed needed; offers easy bed adhesion, and a glossy type finish. Spool's built-in gauge shows percentage of material remaining and approximate length remaining.

Print bed / cold = buildtak with coat of PVA Hot = Glass heated to 45C with coat of PVA. Sds & key features: shore hardness = 85a truly flexible no fill or layer manipulation required to achieve performance 660% elongation allows for repeated movement and impact without wear or cracking  polyurethane composition allows for excellent vibration reduction patented low friction exterior allows for smooth feeding Abrasion resistance 20% better than ABS and 68% better than PLA Consistent diameter and material properties providing reliable, ASTM Oils #1-3, including naphtha, high quality prints Chemical resistant to many materials, petroleum and freon Adheres to all standard build platforms without glue or tape REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature:  225°C – 235°C Platform Temperature: Room temperature – 40°C Glue and/ or blue painters tape is suggested if not using a heated bed.

More information about Fenner Drives 3D3011175 #ad


Similar products



Filabot TB1 Taulman BRIDGE Filament, 1.75 mm, White

#ad
#ad
Taulman TB1 #ad - 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Truly flexible - no fill or layer manipulation required to achieve performance. Made of petg plastic, known for its ease of use like PLA and durable strength like ABS; no heating bed needed; offers easy bed adhesion, stiffness, and a glossy type finish.

Spool's built-in gauge shows percentage of material remaining and approximate length remaining. Smooths 3D Printed Objects. It also can be used to coat eps, ePDM and urethane foam as well as wood, ABS, cardboard and paper.1kg 2. 2 lb Spool. Shore hardness = 85A. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2.

Filabot TB1 Taulman BRIDGE Filament, 1.75 mm, White #ad - 20". 225ºc. Printable at 245° C. 660% elongation allows for repeated movement & impact without wear or cracking. Recommended extrusion/nozzle temperature 175°C - 220°C 347°F - 428°F. Epoxy coating for 3D Printed Objects.

More information about Taulman TB1 #ad


Similar products



HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

#ad
#ad
HATCHBOX 3D PLA-1KG1.75-BLK #ad - It also can be used to coat eps, aBS, EPDM and urethane foam as well as wood, cardboard and paper.1kg 2. 2 lb Spool. White. Recommended extrusion/nozzle temperature 175°C - 220°C 347°F - 428°F. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2. 2 pounds; backed by an AmazonBasics 1-year limited warranty. 3d printer filament with 1. 75 mm diameter + / -. 05 mm; designed to fit most common 3D printers check spool size for compatibility; Black; 1 kg spool. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2.

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black #ad - 20". Wood 3d printer Filament Vacuumed Sealed With Desiccant. 1 kg approximately 2. 20 lbs Spool.

More information about HATCHBOX 3D PLA-1KG1.75-BLK #ad


Similar products



eSUN 3D 1.75mm PETG Black Filament 1kg 2.2lb, PETG 3D Printer Filament, 1.75mm Solid Opaque Black

#ad
#ad
ESUN PETG175SB1 #ad - Esun petg 3d printer filament vacuumed sealed with desiccant; 16 colors to choose from; semi-Transparent Colors: blue, solid white, solid gold, solid purple, solid red, solid blue, orange; Solid Opaque Colors: solid black, green, natural, magenta, solid gray, solid green, yellow, solid yellow, solid silver.

eSUN 3D 1.75mm PETG Black Filament 1kg 2.2lb, PETG 3D Printer Filament, 1.75mm Solid Opaque Black #ad - 1. 75mm filament diameter Dimensional Accuracy +/- 005mm. Shore hardness = 85A. Print bed / cold = buildtak with coat of PVA Hot = Glass heated to 45C with coat of PVA. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Compatible with SLA and SLS prints. It works with pla, laywoo, fabric, plaster, powder printed parts and other rigid media.

Smooths 3D Printed Objects. Engineered to reduce jamming; resealable storage bag included to protect filament between use. Recommended extrusion/Nozzle Temperature 235C - 250C. White. Spool diameter: 7. 88" - spool width: 2.

More information about ESUN PETG175SB1 #ad


Similar products



3D Solutech Natural Clear 1.75mm 3D Printer PLA Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS 1.0KG

#ad
#ad
3D Solutech ST175CLPLA #ad - Vacuum sealed our vacuum sealed packaging guarantees you to experience the best performance by isolating  moisturized environment to the filaments. Prints on Un-heated Bed. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Shore hardness = 85A. Check out our store for new and latest colors and materials for your 3d printer.

3D Solutech Natural Clear 1.75mm 3D Printer PLA Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS 1.0KG #ad - Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 2. 05" - inner circle Diameter: 3. 5". For common 3d printers such as makerbot, Mendel, afinia, RepRap, solidoodle 2, flash forge, up, printrbot lc, makergear m2 and etc. Temperature range is 190 degree C - 220 degree C. Quality is our top priority as we hand checked each spool, vacuum sealed and packaged.

High compatibility our filaments had been tested on various brands of 3d printer in the market and with positive customers' feedback. 1. 75mm see through natural clear pla filament. 1 kg approximately 2. 20 lbs Spool.

More information about 3D Solutech ST175CLPLA #ad


Similar products



eSUN 3D Printer CLEANING Filament 1.75mm Natural 0.1kg for all 1.75mm FDM 3D Printers, 1.75mm Cleaning

#ad
#ad
eSUN CLN175N01 #ad - Wide cleaning temperature range of 150 to 260 Celsius. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2. 2 pounds; backed by an AmazonBasics 1-year limited warranty. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Maintenance is important to the longevity and functionality of extruders.

Recommended extrusion/Nozzle Temperature 235C - 250C. Will not clog extruder. Clean the 3d printer's extruder before and after printing for better extruder protection. Excellent vibration reduction. Spool diameter: 8" - spool width: 2. 50" - spool hub Hole Diameter: 2. 05" - inner circle Diameter: 3. 5". For common 3d printers such as makerbot, afinia, Mendel, up, solidoodle 2, RepRap, printrbot lc, flash forge, makergear m2 and etc.

eSUN 3D Printer CLEANING Filament 1.75mm Natural 0.1kg for all 1.75mm FDM 3D Printers, 1.75mm Cleaning #ad - Temperature range is 190 degree C - 220 degree C. Using cleaning filament can prevent nozzle plugging during transition between high and low temperature materials. Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius.

More information about eSUN CLN175N01 #ad


Similar products