Electronics

Elegoo MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino RoHS Compliant


ELEGOO AU-EL-CB-003 - Microcontroller: atmega2560 operating voltage: 5v input:voltagerecommended :7-9v digital I/O Pins: 54 of which 15 provide PWM output Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3. 3v pin: 50 ma flash memory: 256 kb of which 8 kb used by bootloader sram: 8 kb eeprom: 4 kb clock speed: 16 mhz package includes: 1 x mega 2560 ATmega2560-16AU Board Arduino-compatible 1 x USB cable The mega is 100% compatible with arduino and most shields designed for the Arduino mega2560 r3,RoHS Compliant.

The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3. 3v. We have the manufacture factory, making productions and selling by ourselves.

Elegoo MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino RoHS Compliant - We'd like to receive your valuable suggestions for our products and make your idea come true. This version is optimized in the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use.

So we can control the quality of our productions by ourselves for you. In future, that is reserved for future purposes.

More information about ELEGOO AU-EL-CB-003

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino


ELEGOO EL-CP-004 - We have always cared about the customer experience and improve the product function details. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

Including 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Everything is shipped in a well-designed package wrapped with thermoplastic film. We’d like to receive your valuable suggestions for our products and make your idea come true. So we can control the quality of our productions by ourselves for you.

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino - We have the manufacture factory, making productions and selling by ourselves.

More information about ELEGOO EL-CP-004


Similar products



ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino RoHS Compliant


ELEGOO AU-EL-CB-001 - We'd like to receive your valuable suggestions for our products and make your idea come true. Faster transfer rates and more memory. Control using atmel ATMEGA328P chip. Features * atmega328p microcontroller * input voltage - 7-12V * 5V Electric current: 500MA * 3. 3v electric current: 50ma * 14 digital i/o pins 6 pwm outputs * 8 analog inputs * 32k Flash Memory * 16Mhz Clock Speed Component listing: 1pcs UNO R3 Development Board 1pcs USB cable.

We have always cared about the customer experience and improve the product function details. New improvement: clearly print on the female header connector, more precise and easier to use the wire. The uno now uses an atmega16u2 instead of the ATMega8U2 chip. We have always cared about the customer experience and improve the product function details.

ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino RoHS Compliant - We have the manufacture factory, making productions and selling by ourselves. Rohs Compliant. So we can control the quality of our productions by ourselves for you. Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

Including 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

More information about ELEGOO AU-EL-CB-001


Similar products



HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support Arduino Mega 2560


HiLetgo® - Additionally, a number of arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Description: reprap mega Pololu Shield, or RAMPS for short. 100% compatible with the official version, for arduino uno R3. 8. I2c and spi pins left for future expansion.

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. 4. Integration of additional security 5A and component protection. 3. Heater / mosfet outputs and three fan thermistor circuit. We have always cared about the customer experience and improve the product function details.

HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support Arduino Mega 2560 - The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder. Can be extended to control other accessories. Three field effect transistors, three heater / fan output ports, three thermistor circuits. Heated bed control, extra 11A fuse. Pololu board foot socket, can be easily replaced or removed.

5. Control of additional heating bed 11A fuse.

More information about HiLetgo®


Similar products



ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks


ELEGOO EL-CP-003 - We have always cared about the customer experience and improve the product function details. The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder. Can be extended to control other accessories. Three field effect transistors, three heater / fan output ports, three thermistor circuits.

Heated bed control, extra 11A fuse. Pololu board foot socket, can be easily replaced or removed. 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails. White pp plastic body with black printed legend. 100% compatible with the official version, for arduino uno R3. 200 in 2 power rails, 630 in a 30 x 10 matrix White plastic, with black legend.

ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks - Faster transfer rates and more memory. Control using atmel ATMEGA328P chip. Color legend on distribution strips. With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield. Packing in a paper box. We have always cared about the customer experience and improve the product function details.

Colored power rails for wires 21 to 26 awg 2-sided peelable adhesive tape Component listing: 3pcs 830 tie-points breadboard Each cable length: about 20cm /8-inch.

More information about ELEGOO EL-CP-003


Similar products



SunFounder Mega 2560 Case Enclosure Transparent Gloss Acrylic Computer Box Compatible with Arduino Mega 2560 Rev3 R3, Genuino Mega 2560 Rev3 and other Arduino Compatible Mega 


SunFounder - The mega case is maded by premium acrylic. Fastened by eight screws, easy to install and secure. We have always cared about the customer experience and improve the product function details. New improvement: clearly print on the female header connector, more precise and easier to use the wire. The uno now uses an atmega16u2 instead of the ATMega8U2 chip.

It is designed for the mega 2560 board with slot for pins, eanbling easy connection to other components. Note: 1. This product is only a protective case for Mega 2560, not including a Mega board. If it's located near the USB port, then the case can be applied to your board. Unique design for mega 2560 with pin leakage, which provides easy connection to other components.

SunFounder Mega 2560 Case Enclosure Transparent Gloss Acrylic Computer Box Compatible with Arduino Mega 2560 Rev3 R3, Genuino Mega 2560 Rev3 and other Arduino Compatible Mega  - Provides excellent protection, and fashionable appearance. 100% compatible with the official version, for arduino uno R3. It is made by high grade acrylic, which provides excellent protection and vogue appearance. Introduction this product is protective case of SunFounder Mega 2560, fastened by eight screws.

. Package includes 1 x mega 2560 Acrylic Case Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

More information about SunFounder


Similar products



SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino Uno Mega2560


SunFounder - With this shield, you can display whatever you want by programming the Arduino board. Color legend on distribution strips. With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield. Packing in a paper box. We have always cared about the customer experience and improve the product function details.

The protective case of Arduino Mega 2560 Sunfounder i2c lcd 2004 displays characters of 4 rows with 20 characters in each. Working voltage: 5v dc; Dimension: 60×99x22 mm. Iic/i2c interface; only takes two I/O ports. I2c address: 0x27 or 0x3F. Works with arduino uno/mega2560 board. It can display 4 rows with 20 characters for each.

SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino Uno Mega2560 - We have always cared about the customer experience and improve the product function details. New improvement: clearly print on the female header connector, more precise and easier to use the wire. The uno now uses an atmega16u2 instead of the ATMega8U2 chip. It's in elegant blue with white contents displayed.

Therefore, this is a perfect choice to make your project more interesting and vivid! For more information, refer to https://www. Sunfounder.

More information about SunFounder


Similar products



KINGPRINT Ramps 1.6 Expansion Control Panel with Heatsink Upgraded Ramps 1.4/1.5 for 3D Printer Board


QYFDM - 3 heater / fan pwm controlled MOSFET outputs with 11A fuse protection 3 thermistor inputs. The mega case is maded by premium acrylic. Fastened by eight screws, easy to install and secure. Color legend on distribution strips. With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield.

Packing in a paper box. We have always cared about the customer experience and improve the product function details. The protective case of Arduino Mega 2560 I2c and spi for future expansion to LCD and other components. We have always cared about the customer experience and improve the product function details.

KINGPRINT Ramps 1.6 Expansion Control Panel with Heatsink Upgraded Ramps 1.4/1.5 for 3D Printer Board - The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder. Can be extended to control other accessories. Three field effect transistors, three heater / fan output ports, three thermistor circuits. Heated bed control, extra 11A fuse. Pololu board foot socket, can be easily replaced or removed.

630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails. White pp plastic body with black printed legend.

More information about QYFDM


Similar products



HiLetgo 3.2" IPS TFT LCD Display ILI9481 480X320 36 Pins for Arduino Mega2560


HiLetgo® - Compatible with arduino-Series development Board. Sunfounder i2c lcd 2004 displays characters of 4 rows with 20 characters in each. Working voltage: 5v dc; Dimension: 60×99x22 mm. Iic/i2c interface; only takes two I/O ports. I2c address: 0x27 or 0x3F. Works with arduino uno/mega2560 board. Color legend on distribution strips.

With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield. Packing in a paper box. We have always cared about the customer experience and improve the product function details. The protective case of Arduino Mega 2560 Ramps 1. 6 interface board with new, more powerful SMT MOSFET drivers up to 218W.

HiLetgo 3.2" IPS TFT LCD Display ILI9481 480X320 36 Pins for Arduino Mega2560 - 3 heater / fan pwm controlled MOSFET outputs with 11A fuse protection 3 thermistor inputs. Please notice:This Screen is not touch screen. 100% compatible with the official version, for arduino uno R3. Rohs Compliant. Faster transfer rates and more memory.

More information about HiLetgo®


Similar products



ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial for Arduino UNO R3 MEGA 2560 Nano


ELEGOO EL-KIT-011 - Unique design for mega 2560 with pin leakage, which provides easy connection to other components. Provides excellent protection, and fashionable appearance. Compatible with 3. 3/5v operation voltage level. Add useful modules like gy-521 accelerometer module, LCD1602 screen, two of the hall sensors, DS3231 real time clock module etc.

Upgraded tutorial only for arduino uno r3, listing paper, NANO in CD, MEGA2560 R3, UNO, resistors pack only from Elegoo Team.100% compatible with Arduino and STM32. Updated from the old version others: Received great ideas from our customers taken into consideration. 3 heater / fan pwm controlled MOSFET outputs with 11A fuse protection 3 thermistor inputs.

ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial for Arduino UNO R3 MEGA 2560 Nano - . Compatible with arduino-Series development Board. Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Including 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

Everything is shipped in a well-designed package wrapped with thermoplastic film. 37 sensor kits from other sellers have mercury, please pay attention.

More information about ELEGOO EL-KIT-011


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable


ELEGOO EL-CB-005 - It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, so users have more breadboard space. Add useful modules like gy-521 accelerometer module, LCD1602 screen, two of the hall sensors, DS3231 real time clock module etc.

Upgraded tutorial only for arduino uno r3, uno, listing paper, NANO in CD, MEGA2560 R3, resistors pack only from Elegoo Team.100% compatible with Arduino and STM32. You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2jklJMO. 100% compatible with the official version, for arduino uno R3. The nano is a small, complete, and breadboard-friendly board based on the ATmega328 Arduino Nano 3.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable - X. We have always cared about the customer experience and improve the product function details. New improvement: clearly print on the female header connector, more precise and easier to use the wire. The uno now uses an atmega16u2 instead of the ATMega8U2 chip. Ramps 1.

More information about ELEGOO EL-CB-005


Similar products