Electronics

DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus

#ad
#ad
DROK 90399 #ad - Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Small ripple brings little damage to the board. In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems.

DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus #ad - Package includes: 1x dc-dc converter Electronic circuit requires no electrolytic capacitors and tantalum and it adopt ceramic capacitor. Output voltage: DC 5. 1-5. 2 v output current: Rated 1A-1. 5a single lithium input, the maximum 1. 5a single lithium input efficiency: up to 96% the higher the input voltage, the higher the efficiency Switching frequency: 500KHz Output ripple: 30mV MAX 20M bandwidth input 4V output 5.

1v 1a voltage indication: LED lights with load input voltage less than 2. 7v led indicator off operating temperature: industrial -40°c to +85°c Full load temperature rise: 30°c Load regulation: +/- 1% Voltage regulation: +/- 0

More information about DROK 90399 #ad

DROK LM2596 Numerical Control Voltage Converter Board DC 5-32V 24v 32v to Adjustable 0-30V 12 v 5 v Switching Regulator Module 1.5A Volt Transformer with Red LED Voltage Tester

#ad
#ad
DROK 090029 #ad - Drok buck converter input voltage range is dc 5v-32v, can step 32v 24v 12v down to 5v, or convert 24v to 12v; max output current is 1. 5a, output voltage range is DC 0-30V, max output power is 30W. On/off is the output voltage control button when connect the power supply, the default option is to turn on the output Voltage press the button will turn off the output Voltage then press it again can turn on the output Voltage again, followed by recycling; the two buttons named in and out which are on the left of the digital display can switch between current input Voltage and output Voltage.

Set key is to set the output voltage, press set shortly, the Decimal place of output Voltage flashes; press the two buttons named + and - to increase or decrease the value. The dc-dc voltage regulator board is low power consumption, and has terminal and retain the wire bonding wiring point. Note: please make sure that you use this module within its working range; do NOT output short-circuit or charge the battery, otherwise the board would burn.

DROK LM2596 Numerical Control Voltage Converter Board DC 5-32V 24v 32v to Adjustable 0-30V 12 v 5 v Switching Regulator Module 1.5A Volt Transformer with Red LED Voltage Tester #ad - Press the two buttons named + & - to increase or decrease the value, thereby setting the decimal place of output voltage. Note: 1. 2. After select the required value of decimal place, press SET again and the integral place of output voltage starts flashing. Parameters: Input voltage: 5-32. 0v we suggest you to leave margin Output voltage: 0-30

More information about DROK 090029 #ad


Similar products



DROK Mini USB DC-DC Step Up Converter 3V to 5V 2A Mobile Power Supply Board with Battery Indicator for Tablet PC iPad iPhone

#ad
#ad
DROK 90485 #ad - Feature: module properties: non-isolated step-up module BOOST Input voltage: 2. 6-5. 5v input current: 0-3a output voltage: 5v output current: 0-2A Operating temperature: -40°c to +85°c Working frequency: 1. 2mhz conversion efficiency: up to 93% short circuit protection: Yes Over-temperature protection: Yes Over-temperature automatic shutdown output Input reverse polarity protection: No please install diode at input port Power indicator: 3.

6v red led light identify resistance: support tablet pc, mp3 installation: two 3mm screws Connection: V-IN input, Phone, USB output Dimensions: 20x20x6.8mm package include: 1x dc-dc converter drok buck converter input voltage range is dc 5v-32v, can step 32v 24v 12v down to 5v, or convert 24v to 12v; max output current is 1.

DROK Mini USB DC-DC Step Up Converter 3V to 5V 2A Mobile Power Supply Board with Battery Indicator for Tablet PC iPad iPhone #ad - 5a, output voltage range is DC 0-30V, max output power is 30W. On/off is the output voltage control button when connect the power supply, the default option is to turn on the output Voltage press the button will turn off the output Voltage then press it again can turn on the output Voltage again, followed by recycling; the two buttons named in and out which are on the left of the digital display can switch between current input Voltage and output Voltage.

Set key is to set the output voltage, press set shortly, the Decimal place of output Voltage flashes; press the two buttons named + and - to increase or decrease the value. The dc-dc voltage regulator board is low power consumption, and has terminal and retain the wire bonding wiring point. Note: please make sure that you use this module within its working range; do NOT output short-circuit or charge the battery, otherwise the board would burn.

More information about DROK 90485 #ad


Similar products



ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm Solar Panel Only

#ad
#ad
ALLPOWERS 130x150-2 #ad - Solar panel kit with battery, power small motors or other loads; perfect devices for science project. Halloween day, contact us firstly if you have any question allpowers: always power your life Whenever and Wherever ALLPOWERS is a company in combination with solar and battery application design, buy ASAP"Your Satisfaction is our Highest Priority", development, special offer for one day only, production and sales.

Backing: PCB 2. Uv treated surface and durable weatherproof PCB board. Charging power supply DIY. High-efficiency encapsulated solar panel, providing enough power for DIY. Use this solar panel to power a convenient appliance with free green energy from the sun. Technical data for one piece * size:130mm*150mm * Voltage: 5V * Current: 500mAh * Power: 2.

ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm Solar Panel Only #ad - 5w * conversion rate: 17% * weight: 92g * Packgae:2 pieces solar panel totally 5W Standard Configuration 1. Get the allpowERS charger now. The allpowers portable charger allows you to charge your electronic products anywhere at any time. Portable, compact & stylish size with solid attractive casing. Protective film: pe attention: the bubble on the panel will not affect its normal working, just like the plastic film on the phone Warranty: 18-month product guarantee from ALLPOWERS Drok buck converter input voltage range is dc 5v-32v, you can remove it, can step 32v 24v 12v down to 5v, or convert 24v to 12v; max output current is 1.

More information about ALLPOWERS 130x150-2 #ad


Similar products



5PCS PFM Control DC-DC Converter Step Up Boost Module 600MA USB Charger 0.9V-5V to 5V Power Supply Modul TE110

#ad
#ad
SenMod 4350280397 #ad - Small pfm control DC/DC boost controller chip 2. Enter any dc voltage of 09v~5v, output current of 500~600 ma, digital products supply, camera, single-chip, for the mobile phone, can be stable output 5V DC voltage, Stable output 5V DC voltage. Usb female, can direct power to the USB interface device with USB female versatile.

Uv treated surface and durable weatherproof PCB board. Charging power supply DIY. High-efficiency encapsulated solar panel, providing enough power for DIY. Usb female, can direct power to the USB interface device with USB female versatile 4. Package contents: 5v 500mah 2. 5w solar panels2 solar panels, totally 5W.

Pcb size: 34mm x 15. 2mm ultra-small size, installed in a variety of small equipment Package Includes: 5 PCS 09~5v to 5v boost module drok buck converter input voltage range is dc 5v-32v, can step 32v 24v 12v down to 5v, or convert 24v to 12v; max output current is 1. 5a, output voltage range is DC 0-30V, max output power is 30W.

5PCS PFM Control DC-DC Converter Step Up Boost Module 600MA USB Charger 0.9V-5V to 5V Power Supply Modul TE110 #ad - On/off is the output voltage control button when connect the power supply, the default option is to turn on the output Voltage press the button will turn off the output Voltage then press it again can turn on the output Voltage again, followed by recycling; the two buttons named in and out which are on the left of the digital display can switch between current input Voltage and output Voltage.

Set key is to set the output voltage, press set shortly, the Decimal place of output Voltage flashes; press the two buttons named + and - to increase or decrease the value.

More information about SenMod 4350280397 #ad


Similar products



Sunnytech 0.5w 5v 100ma Mini Small Solar Panel Module DIY Polysilicon Solar Epoxy Cell Charger B016

#ad
#ad
Sunnytech #ad - Solar panel kit with battery, power small motors or other loads; perfect devices for science project. For those of you who want to connect more than one panel together, this panel has two soldered tabs for permanent connections. Education-- solar panels are devices that absorb sunlight and convert solar radiation directly or indirectly into electricity through photoelectric or photochemical effects, it's perfect devices for science project.

Connect solar panels in parallel or in series-- when the voltage of your solar panel doesn't satisfy your storage battery, you can take two or more same solar panels together in series. Voltage: 5v size: 80mm*80mm/3. 15in*3. 15in weight: 50g/1. 76oz features: 1. 4 holes at for extreme corner for holding screw, at 2mm diameter.

Sunnytech 0.5w 5v 100ma Mini Small Solar Panel Module DIY Polysilicon Solar Epoxy Cell Charger B016 #ad - In order to speed up the rate of charge, two 5. 5v solar panel connect together in series, you can take two or more same solar panel together parallel connection. Uv treated surface and durable weatherproof PCB board. For those of you who want to connect more than one panel together, this panel has two soldered tabs for permanent connections Parameters Model Number: GP80*80-10A100 Material: Monocrystalline Silicon Number of Cells: 10 Max.

Enter any dc voltage of 0

More information about Sunnytech #ad


Similar products



5V 30mA Compact Solar Panels – Power Home DIY Projects, Toys & Battery Chargers, 53 x 30mm - AMX3d Micro Mini Solar Cells

#ad
#ad
AMX3d #ad - An ideal portable photovoltaic panelfor small home projects such as DIY jobs, lamp repairs, science projects, creating solar walkways etc, the mini panels can also be used for electronic applications, and as a charger for small DC batteries. Diy your own smart model--build your own powered models, solar toys, solar displays, solar lights, charging small DC batteries.

In order to speed up the rate of charge, two 5. 5v solar panel connect together in series, you can take two or more same solar panel together parallel connection. Compact size: these micro mini solar cells are ideal for even the smallest projects, measuring just 53x30x3mm. Portable power: the solar panel can be used as a charger for a rechargeable 3.

5V 30mA Compact Solar Panels – Power Home DIY Projects, Toys & Battery Chargers, 53 x 30mm - AMX3d Micro Mini Solar Cells #ad - 6-3. 7 volt batteries. Many of our customers come from school, colleague, etc. Blocking diode installed --a blocking diode installed already in the backside to protect the solar panel from over-charging and current backflow. High quality & easy use-- high quality epoxy resin, anti-wind and snow, unique technology to make the components beautiful and strong, increase the service life of solar panels.

Pick a project!: great for science projects, electronic applications, DIY and home use - power a motor, LED lights or solar toys. Supplied wire free: The solar panels feature easy solder anode and cathode for quick, straightforward installation.

More information about AMX3d #ad


Similar products



XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420

#ad
#ad
XCSOURCE TE420 #ad - For those of you who want to connect more than one panel together, this panel has two soldered tabs for permanent connections. Education-- solar panels are devices that absorb sunlight and convert solar radiation directly or indirectly into electricity through photoelectric or photochemical effects, it's perfect devices for science project.

Connect solar panels in parallel or in series-- when the voltage of your solar panel doesn't satisfy your storage battery, you can take two or more same solar panels together in series. Such big connection resistance. Otherwise rushed over battery voltage out on much. Such as, so its voltage is 11V. Many of our customers come from school, colleague, etc.

XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420 #ad - Blocking diode installed --a blocking diode installed already in the backside to protect the solar panel from over-charging and current backflow. High quality & easy use-- high quality epoxy resin, anti-wind and snow, unique technology to make the components beautiful and strong, increase the service life of solar panels.

Enter any dc voltage of 09v~5v, output current of 500~600 ma, camera, for the mobile phone, can be stable output 5V DC voltage, digital products supply, single-chip, Stable output 5V DC voltage. Usb female, can direct power to the USB interface device with USB female versatile. Charge current is best battery capacity 0

More information about XCSOURCE TE420 #ad


Similar products



Small Solar Panel 6.0V 70mA with wires

#ad
#ad
Sundance Solar #ad - Full charging voltage: 4. 2v. High-efficiency encapsulated solar panel. Pick a project!: great for science projects, DIY and home use - power a motor, electronic applications, LED lights or solar toys. Supplied wire free: The solar panels feature easy solder anode and cathode for quick, straightforward installation.

Small Solar Panel 6.0V 70mA with wires #ad - Panel specifications: operating voltage: 5v, peak power: 015 watt, working current: 30mA, output voltage: charge for 3. 6 - 3. 7 volt battery. Input voltage: 4. 5~5. 5v. Charging power supply DIY. High-efficiency encapsulated solar panel, providing enough power for DIY. Charge 4 - 1. 2v batteries, AA, AAA. Pcb size: 34mm x 15.

2mm ultra-small size, installed in a variety of small equipment. Color coded wires with alligator clips make working with it easy and fun. Solar panel kit with battery, power small motors or other loads; perfect devices for science project. Uv treated surface and durable weatherproof PCB board.

More information about Sundance Solar #ad


Similar products



NTE Electronics 1N914 Silicon Ultra Fast Switch Rectifier Small Zener Diode, Single Configuration, 200 mA Forward Current, 10mA Test Conditions, 100V Pack of 20

#ad
#ad
NTE Electronics, Inc. 1N914 #ad - Both axial lead and stud mount types are available. Small pfm control DC/DC boost controller chip. Drok buck converter input voltage range is dc 5v-32v, can step 32v 24v 12v down to 5v, or convert 24v to 12v; max output current is 1. 5a, output voltage range is DC 0-30V, max output power is 30W. On/off is the output voltage control button when connect the power supply, the default option is to turn on the output Voltage press the button will turn off the output Voltage then press it again can turn on the output Voltage again, followed by recycling; the two buttons named in and out which are on the left of the digital display can switch between current input Voltage and output Voltage.

NTE Electronics 1N914 Silicon Ultra Fast Switch Rectifier Small Zener Diode, Single Configuration, 200 mA Forward Current, 10mA Test Conditions, 100V Pack of 20 #ad - Set key is to set the output voltage, press set shortly, the Decimal place of output Voltage flashes; press the two buttons named + and - to increase or decrease the value. The dc-dc voltage regulator board is low power consumption, and has terminal and retain the wire bonding wiring point. Note: please make sure that you use this module within its working range; do NOT output short-circuit or charge the battery, otherwise the board would burn.

Dc 2. 6-5. 5v to 5v 2a non-isolated step up boost module. Max 2a output, up to 93% conversion efficiency. With red green battery indicator, the red led lights up when it lower than 3.

More information about NTE Electronics, Inc. 1N914 #ad


Similar products